VIRTUALBOX pokretanje

Rasprave u vezi Linux aplikacija.

Moderator/ica: Moderatori/ce

Avatar
redundant
Postovi: 317
Pridružen/a: 02 svi 2011, 23:24
Spol: M
OS: Debian LXQt
Lokacija: Ri

VIRTUALBOX pokretanje

Post Postao/la redundant »

nisam znao gdje bi stavio ovaj post pa ako admini imaju neko prikladnije mjesto neka ga slobodno prebace...
Trebaju mi za fax 32bitni windowsi pa sam ih odučio staviti u virtualnu mašinu na svom susetu 12.2 KDE. Instalirao sam virtualbox iz yasta,al nikako ga pokrenuti. Kad ga pokrećenm sa ALT+ f2 ili iz menija (system ->emulator) samo skaće ona ikonica groe-dole par sekundi i ništa...kad pobam iz terminala mi izbaci:

Kod: Označi sve

WARNING: The vboxdrv kernel module is not loaded. Either there is no module
         available for the current kernel (3.4.11-2.16-desktop) or it failed to
         load. Please recompile the kernel module and install it by

           sudo /etc/init.d/vboxdrv setup

         You will not be able to start VMs until this problem is fixed.
/usr/bin/virtualbox: line 77: /usr/lib/virtualbox/VirtualBox: Permission denied
/usr/bin/virtualbox: line 77: exec: /usr/lib/virtualbox/VirtualBox: cannot execute: Permission denied
to rekompajliranje kernel modula u trćem redu mi baš ne zvuči napeto... szbunjen
Pa sam ga instalirao sa oraclovih stranic...ista stvar :psuje2

probao sam i u virtaulnu mašinu koja mi je došla sa susetom (system-> virtualization->create virtual machines) pa mi yast izbaci error:

Kod: Označi sve

Failed to start vm-install 
pa kad idem na details mi kaže:

Kod: Označi sve

libvir: RPC error : Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory
libvir: RPC error : Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': No such file or directory
Error: Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': No such file or directory
Ako netko ima rješenje za gore navedene probleme ili preporuku za neki treći softver na zadanu temu, molim da mi odgovori.
Obećavam da nisam nisam odustao o slobodnog softvera i da ću windowse koristiti isključivo u edukativne svrhe :snoozer:
Avatar
tomog999
Postovi: 125
Pridružen/a: 03 ožu 2011, 18:18
Spol: M
OS: mint14Cina/Centos6
Lokacija: Zagreb

Re: VIRTUALBOX pokretanje

Post Postao/la tomog999 »

Jesi instalirao dkms prije samog virtualbox-a,
pogledaj jel imaš sad uopće dkms instaliran.

Uvijek prije same instalacije virtualboxa provjeriti sa packet managerom da li je instaliran dkms paket,
ako nije, obvezno ga treba instalirati.

Bez tog paketa sistem nemože prilikom instalacije buildati Vbox kernel module (drivere potrebne za rad virtualne mašine),
specifične za verziju kernela koju trenutno vrtiš, odnosno verziju Virtualboxa koji vrtiš.

Or something like that. :mrgreen:
Zadnja izmjena: tomog999, dana/u 23 lis 2012, 14:26, ukupno mijenjano 1 put.
To all you "rvacki pravopis" haters, we're gona blow your planet up
we got death star(death star)
and you know that we got it(death star)

Darth Spellingius :D
Avatar
shicy
Postovi: 8905
Pridružen/a: 28 lip 2009, 22:49
Spol: M
OS: Slackware

Re: VIRTUALBOX pokretanje

Post Postao/la shicy »

Kod: Označi sve

/etc/init.d/vboxdrv setup
ili sa sudo, ako koristiš isti :)

evo, iz jednog drugog topica, čovik sa openSUSE-om:
sumski je napisao/la:evo, ovak izgleda kod mene na gušteru (imam vbox sa stranica instaliran)

Kod: Označi sve

/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules                                   done
Uninstalling old VirtualBox DKMS kernel modules                      done
Removing old VirtualBox pci kernel module                            done
Removing old VirtualBox netadp kernel module                         done
Removing old VirtualBox netflt kernel module                         done
Removing old VirtualBox kernel module                                done
Trying to register the VirtualBox kernel modules using DKMS          failed
  (Failed, trying without DKMS)
Recompiling VirtualBox kernel modules                                done
Starting VirtualBox kernel modules                                   done
Napravim modprobe vboxdrv i šljaka.
Avatar
PunkBastard
Postovi: 1975
Pridružen/a: 19 srp 2011, 22:39
Spol: M
OS: Debian 7 Wheezy
Lokacija: wonderland

Re: VIRTUALBOX pokretanje

Post Postao/la PunkBastard »

jesi insalirao kernel header-e ?
I don't want to be a human. I want to see gamma rays, I want to hear x-rays and I want to smell dark matter. I want to reach out with something other than this prehensile paws and feel the solar wind of a super nova flowing over me.
Avatar
redundant
Postovi: 317
Pridružen/a: 02 svi 2011, 23:24
Spol: M
OS: Debian LXQt
Lokacija: Ri

Re: VIRTUALBOX pokretanje

Post Postao/la redundant »

evo me nazad sa novim kompletom pitanja...
@ tomog999
hvala, nisam to znao. Sad sam i to instalirao, pa preinstalirao virtualbox, pa restartao, al ne pomaže...

@Shicy ne znam meni ta datoteka izgleda skroz drugačije ali ima neku kao metodu setup():

Kod: Označi sve

#! /bin/sh
# Oracle VM VirtualBox
# Linux kernel module init script

#
# Copyright (C) 2006-2010 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#

# chkconfig: 35 20 80
# description: VirtualBox Linux kernel module
#
### BEGIN INIT INFO
# Provides:       vboxdrv
# Required-Start: $syslog
# Required-Stop:
# Default-Start:  2 3 4 5
# Default-Stop:   0 1 6
# Short-Description: VirtualBox Linux kernel module
### END INIT INFO

PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH
DEVICE=/dev/vboxdrv
LOG="/var/log/vbox-install.log"
NOLSB=yes
DEBIAN=
VERSION=4.2.2
MODPROBE=/sbin/modprobe

if $MODPROBE -c | grep -q '^allow_unsupported_modules  *0'; then
  MODPROBE="$MODPROBE --allow-unsupported-modules"
fi

[ -f /lib/lsb/init-functions ] || NOLSB=yes
[ -f /etc/vbox/vbox.cfg ] && . /etc/vbox/vbox.cfg
export BUILD_TYPE
export USERNAME
export USER=$USERNAME

if [ -n "$INSTALL_DIR" ]; then
    VBOXMANAGE="$INSTALL_DIR/VBoxManage"
    MODULE_SRC="$INSTALL_DIR/src/vboxhost"
else
    VBOXMANAGE="/usr/lib/virtualbox/VBoxManage"
    MODULE_SRC="/usr/share/virtualbox/src/vboxhost"
fi
BUILDINTMP="$MODULE_SRC/build_in_tmp"
DODKMS="$MODULE_SRC/do_dkms"

# silently exit if the package was uninstalled but not purged,
# applies to Debian packages only
[ -z "$DEBIAN" -o -x $VBOXMANAGE -a -x $BUILDINTMP ] || exit 0

if [ -n "$NOLSB" ]; then
    if [ -f /etc/redhat-release ]; then
        system=redhat
    elif [ -f /etc/SuSE-release ]; then
        system=suse
    elif [ -f /etc/gentoo-release ]; then
        system=gentoo
    fi
fi

[ -r /etc/default/virtualbox ] && . /etc/default/virtualbox

if [ -z "$NOLSB" ]; then
    . /lib/lsb/init-functions
    fail_msg() {
        echo ""
        log_failure_msg "$1"
    }
    succ_msg() {
        log_end_msg 0
    }
    begin_msg() {
        log_daemon_msg "$@"
    }
else
    if [ "$system" = "redhat" ]; then
        . /etc/init.d/functions
        fail_msg() {
            echo -n " "
            echo_failure
            echo
            echo "  ($1)"
        }
        succ_msg() {
            echo -n " "
            echo_success
            echo
        }
    elif [ "$system" = "suse" ]; then
        . /etc/rc.status
        fail_msg() {
            rc_failed 1
            rc_status -v
            echo "  ($1)"
        }
        succ_msg() {
            rc_reset
            rc_status -v
        }
    elif [ "$system" = "gentoo" ]; then
        if [ -f /sbin/functions.sh ]; then
            . /sbin/functions.sh
        elif [ -f /etc/init.d/functions.sh ]; then
            . /etc/init.d/functions.sh
        fi
        fail_msg() {
            eerror "$1"
        }
        succ_msg() {
            eend "$?"
        }
        begin_msg() {
            ebegin "$1"
        }
        if [ "`which $0`" = "/sbin/rc" ]; then
            shift
        fi
    else
        fail_msg() {
            echo " ...failed!"
            echo "  ($1)"
        }
        succ_msg() {
            echo " ...done."
        }
    fi
    if [ "$system" != "gentoo" ]; then
        begin_msg() {
            [ -z "${1:-}" ] && return 1
            if [ -z "${2:-}" ]; then
                echo -n "$1"
            else
                echo -n "$1: $2"
            fi
        }
    fi
fi

failure()
{
    fail_msg "$1"
    exit 0
}

running()
{
    lsmod | grep -q "$1[^_-]"
}

start()
{
    begin_msg "Starting VirtualBox kernel modules"
    if [ -d /proc/xen ]; then
        failure "Running VirtualBox in a Xen environment is not supported"
    fi
    if ! running vboxdrv; then
        if ! rm -f $DEVICE; then
            failure "Cannot remove $DEVICE"
        fi
        if ! $MODPROBE vboxdrv > /dev/null 2>&1; then
            failure "modprobe vboxdrv failed. Please use 'dmesg' to find out why"
        fi
        sleep .2
    fi
    # ensure the character special exists
    if [ ! -c $DEVICE ]; then
        MAJOR=`sed -n 's;\([0-9]\+\) vboxdrv;\1;p' /proc/devices`
        if [ ! -z "$MAJOR" ]; then
            MINOR=0
        else
            MINOR=`sed -n 's;\([0-9]\+\) vboxdrv;\1;p' /proc/misc`
            if [ ! -z "$MINOR" ]; then
                MAJOR=10
            fi
        fi
        if [ -z "$MAJOR" ]; then
            rmmod vboxdrv 2>/dev/null
            failure "Cannot locate the VirtualBox device"
        fi
        if ! mknod -m 0660 $DEVICE c $MAJOR $MINOR 2>/dev/null; then
            rmmod vboxdrv 2>/dev/null
            failure "Cannot create device $DEVICE with major $MAJOR and minor $MINOR"
        fi
    fi
    # ensure permissions
    if ! chown :root $DEVICE 2>/dev/null; then
        rmmod vboxpci 2>/dev/null
        rmmod vboxnetadp 2>/dev/null
        rmmod vboxnetflt 2>/dev/null
        rmmod vboxdrv 2>/dev/null
        failure "Cannot change group root for device $DEVICE"
    fi
    if ! $MODPROBE vboxnetflt > /dev/null 2>&1; then
        failure "modprobe vboxnetflt failed. Please use 'dmesg' to find out why"
    fi
    if ! $MODPROBE vboxnetadp > /dev/null 2>&1; then
        failure "modprobe vboxnetadp failed. Please use 'dmesg' to find out why"
    fi
    if ! $MODPROBE vboxpci > /dev/null 2>&1; then
        failure "modprobe vboxpci failed. Please use 'dmesg' to find out why"
    fi
    # Create the /dev/vboxusb directory if the host supports that method
    # of USB access.  The USB code checks for the existance of that path.
    if grep -q usb_device /proc/devices; then
        mkdir -p -m 0750 /dev/vboxusb 2>/dev/null
        chown root:vboxusers /dev/vboxusb 2>/dev/null
    fi
    succ_msg
}

stop()
{
    begin_msg "Stopping VirtualBox kernel modules"
    if running vboxpci; then
        if ! rmmod vboxpci 2>/dev/null; then
            failure "Cannot unload module vboxpci"
        fi
    fi
    if running vboxnetadp; then
        if ! rmmod vboxnetadp 2>/dev/null; then
            failure "Cannot unload module vboxnetadp"
        fi
    fi
    if running vboxdrv; then
        if running vboxnetflt; then
            if ! rmmod vboxnetflt 2>/dev/null; then
                failure "Cannot unload module vboxnetflt"
            fi
        fi
        if ! rmmod vboxdrv 2>/dev/null; then
            failure "Cannot unload module vboxdrv"
        fi
        if ! rm -f $DEVICE; then
            failure "Cannot unlink $DEVICE"
        fi
    fi
    succ_msg
}

# enter the following variables in /etc/default/virtualbox:
#   SHUTDOWN_USERS="foo bar"  
#     check for running VMs of user foo and user bar
#   SHUTDOWN=poweroff
#   SHUTDOWN=acpibutton
#   SHUTDOWN=savestate
#     select one of these shutdown methods for running VMs
stop_vms()
{
    wait=0
    for i in $SHUTDOWN_USERS; do
        # don't create the ipcd directory with wrong permissions!
        if [ -d /tmp/.vbox-$i-ipc ]; then
            export VBOX_IPC_SOCKETID="$i"
            VMS=`$VBOXMANAGE --nologo list runningvms | sed -e 's/^".*".*{\(.*\)}/\1/' 2>/dev/null`
            if [ -n "$VMS" ]; then
                if [ "$SHUTDOWN" = "poweroff" ]; then
                    begin_msg "Powering off remaining VMs"
                    for v in $VMS; do
                        $VBOXMANAGE --nologo controlvm $v poweroff
                    done
                    succ_msg
                elif [ "$SHUTDOWN" = "acpibutton" ]; then
                    begin_msg "Sending ACPI power button event to remaining VMs"
                    for v in $VMS; do
                        $VBOXMANAGE --nologo controlvm $v acpipowerbutton
                        wait=30
                    done
                    succ_msg
                elif [ "$SHUTDOWN" = "savestate" ]; then
                    begin_msg "Saving state of remaining VMs"
                    for v in $VMS; do
                        $VBOXMANAGE --nologo controlvm $v savestate
                    done
                    succ_msg
                fi
            fi
        fi
    done
    # wait for some seconds when doing ACPI shutdown
    if [ "$wait" -ne 0 ]; then
        begin_msg "Waiting for $wait seconds for VM shutdown"
        sleep $wait
        succ_msg
    fi
}

# setup_script
setup()
{
    stop
    begin_msg "Uninstalling old VirtualBox DKMS kernel modules"
    $DODKMS uninstall vboxhost vboxdrv vboxnetflt vboxnetadp > $LOG
    succ_msg
    if find /lib/modules/`uname -r` -name "vboxpci\.*" 2>/dev/null|grep -q vboxpci; then
        begin_msg "Removing old VirtualBox pci kernel module"
        find /lib/modules/`uname -r` -name "vboxpci\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi  
    if find /lib/modules/`uname -r` -name "vboxnetadp\.*" 2>/dev/null|grep -q vboxnetadp; then
        begin_msg "Removing old VirtualBox netadp kernel module"
        find /lib/modules/`uname -r` -name "vboxnetadp\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi  
    if find /lib/modules/`uname -r` -name "vboxnetflt\.*" 2>/dev/null|grep -q vboxnetflt; then
        begin_msg "Removing old VirtualBox netflt kernel module"
        find /lib/modules/`uname -r` -name "vboxnetflt\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi  
    if find /lib/modules/`uname -r` -name "vboxdrv\.*" 2>/dev/null|grep -q vboxdrv; then
        begin_msg "Removing old VirtualBox kernel module"
        find /lib/modules/`uname -r` -name "vboxdrv\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi
    begin_msg "Trying to register the VirtualBox kernel modules using DKMS"
    if ! $DODKMS install vboxhost $VERSION >> $LOG; then
      fail_msg "Failed, trying without DKMS"
      begin_msg "Recompiling VirtualBox kernel modules"
      if ! $BUILDINTMP \
          --save-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxdrv" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
      if ! $BUILDINTMP \
          --use-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxnetflt" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
      if ! $BUILDINTMP \
          --use-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxnetadp" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
      if ! $BUILDINTMP \
          --use-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxpci" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
    fi
    rm -f /etc/vbox/module_not_compiled
    succ_msg
    start
}

dmnstatus()
{
    if running vboxdrv; then
        str="vboxdrv"
        if running vboxnetflt; then
            str="$str, vboxnetflt"
            if running vboxnetadp; then
                str="$str, vboxnetadp"
            fi
        fi
        if running vboxpci; then
            str="$str, vboxpci"
        fi
        echo "VirtualBox kernel modules ($str) are loaded."
        for i in $SHUTDOWN_USERS; do
            # don't create the ipcd directory with wrong permissions!
            if [ -d /tmp/.vbox-$i-ipc ]; then
                export VBOX_IPC_SOCKETID="$i"
                VMS=`$VBOXMANAGE --nologo list runningvms | sed -e 's/^".*".*{\(.*\)}/\1/' 2>/dev/null`
                if [ -n "$VMS" ]; then
                    echo "The following VMs are currently running:"
                    for v in $VMS; do
                       echo "  $v"
                    done
                fi
            fi
        done
    else
        echo "VirtualBox kernel module is not loaded."
    fi
}

case "$1" in
start)
    start
    ;;
stop)
    stop_vms
    stop
    ;;
stop_vms)
    stop_vms
    ;;
restart)
    stop && start
    ;;
force-reload)
    stop
    start
    ;;
setup)
    setup
    ;;
status)
    dmnstatus
    ;;
*)
    echo "Usage: $0 {start|stop|stop_vms|restart|force-reload|status|setup}"
    exit 1
esac

exit 0
što je to modprobe vboxdrv i kao ga napravim?

@PunkBastard
a što su to kernel headeri i kako ih instaliram?


BTW instaliram iz repozitorija ne mogu ga naći u meniju, a kad ga instaliram sa njihovih stranica mogu, ne znam da li je relevantno za moj slučaj$1
Avatar
max360se
Postovi: 6781
Pridružen/a: 06 lis 2011, 01:29
Spol: M
OS: Ovisi za sta
Lokacija: ~$

Re: VIRTUALBOX pokretanje

Post Postao/la max360se »

Instaliraj Kernel Headere prije nego instaliras vbox i napravi kako ti terminal kaze.
Lutherus je napisao/la:Ne postoje linuksi, postoji samo Linux i on je jedan i on je kernel.
Is Linux About Choice? || Pulsir - awesome blogging site :D
iv@n je napisao/la:Divide et impera i kako se kaže na latinskom da je ljudska glupost neuništiva.
Avatar
shicy
Postovi: 8905
Pridružen/a: 28 lip 2009, 22:49
Spol: M
OS: Slackware

Re: VIRTUALBOX pokretanje

Post Postao/la shicy »

ajde u terminal i kucaj:

Kod: Označi sve

/etc/init.d/vboxdrv setup
pa nakon toga

Kod: Označi sve

modprobe vboxdrv
i trebalo bi raditi
Avatar
max360se
Postovi: 6781
Pridružen/a: 06 lis 2011, 01:29
Spol: M
OS: Ovisi za sta
Lokacija: ~$

Re: VIRTUALBOX pokretanje

Post Postao/la max360se »

Kernel headers su mu dependency
Lutherus je napisao/la:Ne postoje linuksi, postoji samo Linux i on je jedan i on je kernel.
Is Linux About Choice? || Pulsir - awesome blogging site :D
iv@n je napisao/la:Divide et impera i kako se kaže na latinskom da je ljudska glupost neuništiva.
Avatar
redundant
Postovi: 317
Pridružen/a: 02 svi 2011, 23:24
Spol: M
OS: Debian LXQt
Lokacija: Ri

Re: VIRTUALBOX pokretanje

Post Postao/la redundant »

instalirao sam paket kernel-source, koliko sam skužio guglajući to bi trebao biti kernel header...ako to nije dovoljno, molim vas da mi kažete kako se zove dotični paket(i)!
Obavio sam ovo od Shicy-a u terminalu i dobio:

Kod: Označi sve

linux-yri7:/home/laput # /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules
Message from syslogd@linux-yri7 at Oct 23 21:46:07 ...
 kernel:[ 1938.497610] RTSpinlockReleaseNoInts: ffff8800327168d0 (magic=0x19480428)
                                                                                                                                                                                     done
Uninstalling old VirtualBox DKMS kernel modules                                                                                                                                      done
Trying to register the VirtualBox kernel modules using DKMS                                                                                                                          done
Starting VirtualBox kernel modules                                                                                                                                                   done
linux-yri7:/home/laput # modprobe vboxdrv
Još me treminal tražio da instaliram make pa sam i to napravio.
Virtualbox se i dalje odbija pokrenuti!
Avatar
max360se
Postovi: 6781
Pridružen/a: 06 lis 2011, 01:29
Spol: M
OS: Ovisi za sta
Lokacija: ~$

Re: VIRTUALBOX pokretanje

Post Postao/la max360se »

daj ispis iz terminala kad pokrećeš
Lutherus je napisao/la:Ne postoje linuksi, postoji samo Linux i on je jedan i on je kernel.
Is Linux About Choice? || Pulsir - awesome blogging site :D
iv@n je napisao/la:Divide et impera i kako se kaže na latinskom da je ljudska glupost neuništiva.
Odgovori