Debian 5 - Problemi u samom startu

glaskoncILLa · Post Postao/la **glaskoncILLa** » 05 kol 2010, 17:54

daj cat /etc/X11/xorg.conf i pejstaj sto ti izbaci ovdje.

ako ti gubmici jako fale, upisi metacity --replace kao user, ne kao root i vratiti ce se.

charuga · Post Postao/la **charuga** » 05 kol 2010, 18:03

Kod: Označi sve

charuga@debian:~$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 256.44  (buildmeister@builder97.nvidia.com)  Thu Jul 29 02:00:07 PDT 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

charuga@debian:~$

glaskoncILLa · Post Postao/la **glaskoncILLa** » 05 kol 2010, 18:27

ok, sad otvori /etc/X11/xorg.conf, obrisi sve sto pise u njemu i stavi ovo;

Kod: Označi sve

Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/X11/misc"
   FontPath     "/usr/share/fonts/X11/cyrillic"
   FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath     "/usr/share/fonts/X11/Type1"
   FontPath     "/usr/share/fonts/X11/100dpi"
   FontPath     "/usr/share/fonts/X11/75dpi"
   FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath     "built-ins"
EndSection

Section "Module"
   Load  "extmod"
   Load  "record"
   Load   "glx"
   Load  "dri2"
#   Load   "dri"
   Load  "dbe"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "auto"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   VendorName   "Monitor Vendor"
   ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"              # [<bool>]
        #Option     "HWcursor"              # [<bool>]
        #Option     "NoAccel"               # [<bool>]
        #Option     "ShadowFB"              # [<bool>]
        #Option     "UseFBDev"              # [<bool>]
        #Option     "Rotate"                # [<str>]
        #Option     "VideoKey"              # <i>
        #Option     "FlatPanel"             # [<bool>]
        #Option     "FPDither"              # [<bool>]
        #Option     "CrtcNumber"            # <i>
        #Option     "FPScale"               # [<bool>]
        #Option     "FPTweak"               # <i>
        #Option     "DualHead"              # [<bool>]
   Identifier  "Card0"
   Driver   "nvidia"
   Option      "Coolbits"   "1"
   Option      "AddARGBGLXVisuals"   "true"
   Option "AllowGLXWithComposite" "true"
   Option "XAANoOffscreenPixmaps" "true"
   Option      "TripleBuffer"   "false"
   VendorName  "nVidia Corporation"
   BoardName   "G84 [GeForce 8600 GTS]"
   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Option "AddARGBGLXVisuals" "True"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   SubSection "Display"
      Viewport   0 0
      Depth     1
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     4
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection


Section "Extensions"
  Option      "Composite"   "enable"
#   Option      "RENDER"   "disable"
EndSection

to moras napraviti kao root i moras biti apsolutno siguran da si to ispravno napravio, dakle sve i jedno slovo mora biti kopirano.
nakon toga restartaj i to bi trebalo biti to.

charuga · Post Postao/la **charuga** » 05 kol 2010, 18:46

nece. sigurno sam sve copy-paste ali nece. opet kada ga restartam dobijem da se logiram kao root i onda ako hocu opet da mi dojde do ovoga kako imam sada (rade par efekata ) onda pokrenem sgfxi skriptu pa odem u /etc/X11 i tamo napravim cp xorg.conf.NVIDIA xorg.conf i kada se reboota upisem compiz --replace i to je to.imam samo neke efekte . da li da pokusavam dalje nesto , mozda sve od pocetka ili da se zadovoljim sa ovime sta imam ?
kada ukucam compiz --replace dobijem ovo

Kod: Označi sve

root@debian:/home/charuga# compiz --replace
compiz (core) - Warn: SmcOpenConnection failed: None of the authentication protocols specified are supported
Backend     : ini
Integration : true
Profile     : default
Adding plugins
Initializing core options...done
Initializing move options...done
Initializing resize options...done
Initializing place options...done
Initializing decoration options...done
Initializing water options...done
Initializing wall options...done

i ne prestaje tj.ako hocu ugasiti terminal ne da mi kaze da se jos vrsi neki postupak , tocnije "There is still a process running in this terminal. Closing the terminal will kill it" ?

drade · Post Postao/la **drade** » 06 kol 2010, 06:36

charuga je napisao/la:nece. sigurno sam sve copy-paste ali nece. opet kada ga restartam dobijem da se logiram kao root i onda ako hocu opet da mi dojde do ovoga kako imam sada (rade par efekata ) onda pokrenem sgfxi skriptu pa odem u /etc/X11 i tamo napravim cp xorg.conf.NVIDIA xorg.conf i kada se reboota upisem compiz --replace i to je to.imam samo neke efekte . da li da pokusavam dalje nesto , mozda sve od pocetka ili da se zadovoljim sa ovime sta imam ?
kada ukucam compiz --replace dobijem ovo
Kod: Označi sve
root@debian:/home/charuga# compiz --replace
compiz (core) - Warn: SmcOpenConnection failed: None of the authentication protocols specified are supported
Backend     : ini
Integration : true
Profile     : default
Adding plugins
Initializing core options...done
Initializing move options...done
Initializing resize options...done
Initializing place options...done
Initializing decoration options...done
Initializing water options...done
Initializing wall options...done
i ne prestaje tj.ako hocu ugasiti terminal ne da mi kaze da se jos vrsi neki postupak , tocnije "There is still a process running in this terminal. Closing the terminal will kill it" ?

Pozdrav,

Probaj pokrenuti

compiz --replace

kao obican korisnik, a ne kao root korisnik, postaj eventualan output uz svoj odgovor.

D.

charuga · Post Postao/la **charuga** » 06 kol 2010, 17:28

Kod: Označi sve

charuga@debian:~$ compiz --replace
Backend     : ini
Integration : true
Profile     : default
Adding plugins
Initializing core options...done
Initializing move options...done
Initializing resize options...done
Initializing place options...done
Initializing decoration options...done
Initializing water options...done
Initializing wobbly options...done
compiz (cube) - Warn: Failed to load slide: /usr/share/images/desktop-base/debian-blueish-wallpaper-640x480.png
Initializing cube options...done
Initializing rotate options...done
compiz (core) - Error: Plugin 'text' not loaded.

compiz (shift) - Warn: No compatible text plugin loaded.
Initializing shift options...done
Initializing scale options...done
Initializing expo options...done

radi , dobijem svejedno "There is still a process running in this terminal. Closing the terminal will kill it" ?
ali i kada ga ipak ugasim rade efekti.
hvala drade

hvala glas

charuga · Post Postao/la **charuga** » 07 kol 2010, 20:21

rade efekti dok ne restartam komp

jel ima nesto sta bi napravilo da stalno rade?
rade svaki putr kada upisem "compiz --replace" kao obican korisnik ali da li ima nesto sto bi zamjenilo ponavljanje postupka prilikom svakog restarta

drade · Post Postao/la **drade** » 07 kol 2010, 22:45

Pozdrav,

Koji WM koristis (kde, gnome ... ) ?

D.

charuga · Post Postao/la **charuga** » 08 kol 2010, 06:41

gnome.

drade · Post Postao/la **drade** » 08 kol 2010, 10:55

Mozes probati sljedece:

Prvo izdaj komandu (postaj output ovdje prije bilo kakve modifikacije)

Kod: Označi sve

# test -f /usr/share/applications/compiz.desktop && cat /usr/share/applications/compiz.desktop || echo "Ne postoji"

Ukoliko javi "Ne postoji", onda kreni s korakom dolje, a ukoliko postoji, postaj sadrzaj koji ce gore navedena komanda izlistati.

Kao root korisnik izdaj komande (copy-paste):

Kod: Označi sve

echo -e "[Desktop Entry]" >> /usr/share/applications/compiz.desktop
echo -e "Type=Application" >> /usr/share/applications/compiz.desktop
echo -e "Encoding=UTF-8" >> /usr/share/applications/compiz.desktop
echo -e "Name=Compiz" >> /usr/share/applications/compiz.desktop
echo -e "Exec=/usr/bin/compiz --replace --sm-disable --ignore-desktop-hints ccp --indirect-rendering"  >> /usr/share/applications/compiz.desktop
echo -e "NoDisplay=true" >> /usr/share/applications/compiz.desktop
echo -e "X-GNOME-WMSettingsModule=compiz" >> /usr/share/applications/compiz.desktop
echo -e "X-GNOME-Autostart-Phase=WindowManager" >> /usr/share/applications/compiz.desktop
echo -e "X-GNOME-Provides=windowmanager" >> /usr/share/applications/compiz.desktop
echo -e "X-GNOME-WMName=Compiz" >> /usr/share/applications/compiz.desktop
echo -e "X-GnomeWMSettingsLibrary=compiz" >> /usr/share/applications/compiz.desktop

Nakon gore navedenih komandi izdaj sljedecu komandu (kao obican korisnik):

Kod: Označi sve

gconftool-2 --set -t string /desktop/gnome/session/required_components/windowmanager compiz

To bi trebalo biti to, ukoliko ne proradi, probati cemo to rijesiti na drugaciji nacin.

D.

Linux za Sve forum

Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu

Re: Debian 5 - Problemi u samom startu