Make·Play·Live is the hub of a dynamic community focused on open technology and Free culture projects.
src: http://www.youtube.com/watch?v=LHxY906cHRk
src: http://www.youtube.com/watch?v=pnZDxiMKF4Q
http://makeplaylive.com/index.html
http://merproject.org/
- Hardware
Included CPU card capabilities
Processor: ARM® Cortex™-A7 1Ghz dual core (Allwinner A20)
GPU Mali400MP2 with OpenGL ES 2.0/1.1
RAM 1GB DDR2
Storage 4GB NAND flash
Video Micro HDMI (video + audio)
RGB/TTL
USB Micro USB OTG
USB2 host
Networking 10/100 Mbit Ethernet
Other buses i2c, 8 GPIO, UART0
Weight Under 40 grams
Feature board ports
USB Fullsize USB2 host port
Ethernet 10/100/1000 RJ-45
UARTO Pins:
1: GND
2: 5VDC
3 TX
4: RX
EEPROM 32K Serial EEPROM (i2c address 0x54)
SATA SATA II interface connector
Casing Sturdy metal case with guides for docking with the feature board
Power 6-12VDC, up to 2.5A. Recommended 9VDC or less.
Green power status LED.
44 PIN DIL Pins:
1-29: RGB/TTL interface
30-31: i2c SDA/SCL lines
32-39: 8 GPIO for user's choice
40: uBoot (Short to GND to enable)
41-42: TX/RX UART0
43-44: GND/5VDC
Dock Sturdy PCMCIA header with guide rails and push-button ejector
Weight Under 60 grams