[Riješeno] D link DWA-123 i LMDE

rudar · Post Postao/la **rudar** » 09 lis 2013, 20:15

Evo ispisa s LMDE-a (gdje NE radi bežični):

lsmod

Module                  Size  Used by

arc4                   12543  2 

rt2800usb              22082  0 

rt2x00usb              17687  1 rt2800usb

rt2800lib              56580  1 rt2800usb

rt2x00lib              38558  3 rt2x00usb,rt2800lib,rt2800usb

mac80211              358182  3 rt2x00lib,rt2x00usb,rt2800lib

cfg80211              319971  2 mac80211,rt2x00lib

crc_ccitt              12347  1 rt2800lib

rfkill                 19242  1 cfg80211

parport_pc             22409  0 

ppdev                  12763  0 

lp                     13025  0 

parport                31901  3 lp,ppdev,parport_pc

cpufreq_stats          12866  0 

cpufreq_powersave      12454  0 

cpufreq_conservative    14159  0 

cpufreq_userspace      12576  0 

binfmt_misc            12925  1 

xt_hl                  12449  6 

ip6t_rt                12499  3 

nf_conntrack_ipv6      13649  7 

nf_defrag_ipv6         29270  1 nf_conntrack_ipv6

ipt_REJECT             12502  1 

xt_LOG                 17220  9 

xt_limit               12638  12 

xt_tcpudp              12570  18 

xt_addrtype            12557  4 

nf_conntrack_ipv4      18549  7 

nf_defrag_ipv4         12483  1 nf_conntrack_ipv4

xt_conntrack           12681  14 

ip6table_filter        12540  1 

ip6_tables             22050  1 ip6table_filter

nf_conntrack_netbios_ns    12445  0 

nf_conntrack_broadcast    12365  1 nf_conntrack_netbios_ns

nf_nat_ftp             12460  0 

nf_nat                 18378  1 nf_nat_ftp

nf_conntrack_ftp       12651  1 nf_nat_ftp

nf_conntrack           59788  8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6

iptable_filter         12536  1 

ip_tables              22036  1 iptable_filter

x_tables               19041  12 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype

loop                   22869  0 

fuse                   67503  1 

dm_crypt               18457  0 

dm_mod                 64008  1 dm_crypt

snd_hda_codec_realtek    32712  1 

snd_hda_intel          35718  3 

snd_hda_codec         122850  2 snd_hda_codec_realtek,snd_hda_intel

snd_hwdep              13189  1 snd_hda_codec

snd_pcm_oss            41175  0 

snd_mixer_oss          18034  1 snd_pcm_oss

snd_pcm                68525  3 snd_pcm_oss,snd_hda_codec,snd_hda_intel

snd_page_alloc         13018  2 snd_pcm,snd_hda_intel

snd_seq_midi           12848  0 

snd_seq_midi_event     13316  1 snd_seq_midi

snd_rawmidi            23040  1 snd_seq_midi

snd_seq                45186  2 snd_seq_midi_event,snd_seq_midi

i915                  494628  2 

coretemp               12898  0 

usb_storage            48158  0 

video                  17792  1 i915

mperf                  12453  0 

drm_kms_helper         31837  1 i915

drm                   211856  3 i915,drm_kms_helper

snd_seq_device         13176  3 snd_seq,snd_rawmidi,snd_seq_midi

iTCO_wdt               12831  0 

iTCO_vendor_support    12704  1 iTCO_wdt

lpc_ich                16757  0 

mei_me                 13568  0 

mfd_core               12601  1 lpc_ich

psmouse                74832  0 

evdev                  17611  14 

i2c_algo_bit           12841  1 i915

pcspkr                 12632  0 

snd_timer              22773  2 snd_pcm,snd_seq

serio_raw              12940  0 

i2c_i801               17045  0 

mei                    45886  1 mei_me

i2c_core               24353  5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit

kvm                   301458  0 

snd                    53068  17 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss

processor              28526  0 

thermal_sys            23137  2 video,processor

soundcore              13026  1 snd

wmi                    13243  0 

microcode              30413  0 

button                 12944  1 i915

ext4                  381419  1 

crc16                  12343  1 ext4

jbd2                   76205  1 ext4

mbcache                13082  1 ext4

hid_generic            12393  0 

btrfs                 641507  0 

usbhid                 40964  0 

hid                    81894  2 hid_generic,usbhid

xor                    16985  1 btrfs

zlib_deflate           25638  1 btrfs

raid6_pq               95431  1 btrfs

libcrc32c              12426  1 btrfs

sg                     26095  0 

sr_mod                 21988  0 

sd_mod                 40541  3 

cdrom                  35212  1 sr_mod

crc_t10dif             12348  1 sd_mod

crc32c_intel           21850  1 

ghash_clmulni_intel    13062  0 

cryptd                 14560  1 ghash_clmulni_intel

ehci_pci               12472  0 

ehci_hcd               40590  1 ehci_pci

ahci                   25148  2 

libahci                23136  1 ahci

libata                141969  2 ahci,libahci

scsi_mod              158249  5 sg,usb_storage,libata,sd_mod,sr_mod

r8169                  52872  0 

mii                    12675  1 r8169

usbcore               134993  6 rt2x00usb,usb_storage,rt2800usb,ehci_hcd,ehci_pci,usbhid

usb_common             12440  1 usbcore

rudar · Post Postao/la **rudar** » 09 lis 2013, 20:16

I još:

Kod: Označi sve

dmesg

[    0.044265] ... version:                3

[    0.044266] ... bit width:              48

[    0.044267] ... generic registers:      4

[    0.044268] ... value mask:             0000ffffffffffff

[    0.044269] ... max period:             000000007fffffff

[    0.044269] ... fixed-purpose events:   3

[    0.044270] ... event mask:             000000070000000f

[    0.054901] CPU1 microcode updated early to revision 0x29, date = 2013-06-12

[    0.057639] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.044459] smpboot: Booting Node   0, Processors  #1 #2 #3 OK

[    0.084091] Brought up 4 CPUs

[    0.084094] smpboot: Total of 4 processors activated (26339.44 BogoMIPS)

[    0.086519] devtmpfs: initialized

[    0.088702] PM: Registering ACPI NVS region [mem 0xbaa9c000-0xbaae4fff] (299008 bytes)

[    0.088713] PM: Registering ACPI NVS region [mem 0xbab05000-0xbab12fff] (57344 bytes)

[    0.088716] PM: Registering ACPI NVS region [mem 0xbab64000-0xbaba6fff] (274432 bytes)

[    0.088855] regulator-dummy: no parameters

[    0.088902] NET: Registered protocol family 16

[    0.088987] ACPI: bus type PCI registered

[    0.088988] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.089029] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.089031] PCI: not using MMCONFIG

[    0.089032] PCI: Using configuration type 1 for base access

[    0.089559] bio: create slab <bio-0> at 0

[    0.089646] ACPI: Added _OSI(Module Device)

[    0.089648] ACPI: Added _OSI(Processor Device)

[    0.089649] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.089650] ACPI: Added _OSI(Processor Aggregator Device)

[    0.090281] ACPI: EC: Look up EC in DSDT

[    0.090954] ACPI: Executed 1 blocks of module-level executable AML code

[    0.093304] ACPI: SSDT 00000000bab09918 003E0 (v01    AMI      IST 00000001 MSFT 03000001)

[    0.093523] ACPI: Dynamic OEM Table Load:

[    0.093524] ACPI: SSDT           (null) 003E0 (v01    AMI      IST 00000001 MSFT 03000001)

[    0.093548] ACPI: SSDT 00000000bab08d98 00120 (v01    AMI      CST 00000001 MSFT 03000001)

[    0.093713] ACPI: Dynamic OEM Table Load:

[    0.093714] ACPI: SSDT           (null) 00120 (v01    AMI      CST 00000001 MSFT 03000001)

[    0.094096] ACPI: Interpreter enabled

[    0.094103] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)

[    0.094111] ACPI: (supports S0 S1 S3 S4 S5)

[    0.094112] ACPI: Using IOAPIC for interrupt routing

[    0.094129] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.094177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources

[    0.107679] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.107746] ACPI: No dock devices found.

[    0.107921] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored

[    0.112115] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.112449] PCI host bridge to bus 0000:00

[    0.112452] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.112454] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]

[    0.112455] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]

[    0.112457] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]

[    0.112458] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]

[    0.112459] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

[    0.112461] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]

[    0.112462] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]

[    0.112469] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000

[    0.112539] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400

[    0.112562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.112591] pci 0000:00:01.0: System wakeup disabled by ACPI

[    0.112621] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000

[    0.112628] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]

[    0.112633] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]

[    0.112637] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]

[    0.112723] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000

[    0.112744] pci 0000:00:16.0: reg 10: [mem 0xfe508000-0xfe50800f 64bit]

[    0.112815] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

[    0.112893] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320

[    0.112912] pci 0000:00:1a.0: reg 10: [mem 0xfe507000-0xfe5073ff]

[    0.112996] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[    0.113035] pci 0000:00:1a.0: System wakeup disabled by ACPI

[    0.113067] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300

[    0.113080] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]

[    0.113142] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.113212] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400

[    0.113341] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.113378] pci 0000:00:1c.0: System wakeup disabled by ACPI

[    0.113412] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400

[    0.113540] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[    0.113578] pci 0000:00:1c.1: System wakeup disabled by ACPI

[    0.113612] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400

[    0.113738] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[    0.113777] pci 0000:00:1c.2: System wakeup disabled by ACPI

[    0.113811] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400

[    0.113938] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

[    0.113977] pci 0000:00:1c.3: System wakeup disabled by ACPI

[    0.114006] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400

[    0.114077] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[    0.114109] pci 0000:00:1c.4: System wakeup disabled by ACPI

[    0.114138] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400

[    0.114210] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[    0.114242] pci 0000:00:1c.5: System wakeup disabled by ACPI

[    0.114277] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320

[    0.114297] pci 0000:00:1d.0: reg 10: [mem 0xfe506000-0xfe5063ff]

[    0.114381] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[    0.114418] pci 0000:00:1d.0: System wakeup disabled by ACPI

[    0.114449] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100

[    0.114584] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601

[    0.114601] pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]

[    0.114608] pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]

[    0.114615] pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]

[    0.114622] pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]

[    0.114629] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]

[    0.114636] pci 0000:00:1f.2: reg 24: [mem 0xfe505000-0xfe5057ff]

[    0.114676] pci 0000:00:1f.2: PME# supported from D3hot

[    0.114719] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500

[    0.114732] pci 0000:00:1f.3: reg 10: [mem 0xfe504000-0xfe5040ff 64bit]

[    0.114751] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]

[    0.114827] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.114909] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.115005] pci 0000:00:1c.1: PCI bridge to [bus 03]

[    0.115098] pci 0000:00:1c.2: PCI bridge to [bus 04]

[    0.115193] pci 0000:00:1c.3: PCI bridge to [bus 05]

[    0.115257] pci 0000:00:1c.4: PCI bridge to [bus 06]

[    0.115340] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000

[    0.115359] pci 0000:07:00.0: reg 10: [io  0xe000-0xe0ff]

[    0.115392] pci 0000:07:00.0: reg 18: [mem 0xfe400000-0xfe400fff 64bit]

[    0.115413] pci 0000:07:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]

[    0.115501] pci 0000:07:00.0: supports D1 D2

[    0.115503] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.115539] pci 0000:07:00.0: System wakeup disabled by ACPI

[    0.120114] pci 0000:00:1c.5: PCI bridge to [bus 07]

[    0.120121] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]

[    0.120127] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]

[    0.120143] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]

[    0.120250] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)

[    0.120370] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted

[    0.120629] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[    0.120680] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)

[    0.120728] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)

[    0.120777] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)

[    0.120825] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0

[    0.120874] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0

[    0.120923] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)

[    0.120971] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)

[    0.121040] ACPI: Enabled 3 GPEs in block 00 to 3F

[    0.121044] acpi root: \_SB_.PCI0 notify handler is installed

[    0.121069] Found 1 acpi root devices

[    0.121160] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[    0.121162] vgaarb: loaded

[    0.121163] vgaarb: bridge control possible 0000:00:02.0

[    0.121193] PCI: Using ACPI for IRQ routing

[    0.127102] PCI: pci_cache_line_size set to 64 bytes

[    0.127146] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]

[    0.127147] e820: reserve RAM buffer [mem 0xbaa9c000-0xbbffffff]

[    0.127149] e820: reserve RAM buffer [mem 0xbab05000-0xbbffffff]

[    0.127151] e820: reserve RAM buffer [mem 0xbae22000-0xbbffffff]

[    0.127152] e820: reserve RAM buffer [mem 0xbae38000-0xbbffffff]

[    0.127153] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]

[    0.127154] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]

[    0.127243] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.127247] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[    0.129258] Switching to clocksource hpet

[    0.130415] pnp: PnP ACPI init

[    0.130424] ACPI: bus type PNP registered

[    0.130505] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved

[    0.130507] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved

[    0.130509] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved

[    0.130511] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved

[    0.130513] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved

[    0.130515] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.130638] system 00:01: [io  0x0a40-0x0a5f] has been reserved

[    0.130640] system 00:01: [io  0x0a30-0x0a3f] has been reserved

[    0.130642] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.130670] pnp 00:02: [dma 4]

[    0.130684] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)

[    0.130713] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.130729] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)

[    0.130768] system 00:05: [io  0x04d0-0x04d1] has been reserved

[    0.130770] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.130790] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)

[    0.130942] system 00:07: [io  0x0400-0x0453] has been reserved

[    0.130943] system 00:07: [io  0x0458-0x047f] has been reserved

[    0.130945] system 00:07: [io  0x1180-0x119f] has been reserved

[    0.130947] system 00:07: [io  0x0500-0x057f] has been reserved

[    0.130949] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved

[    0.130950] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved

[    0.130952] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved

[    0.130954] system 00:07: [mem 0xff000000-0xffffffff] has been reserved

[    0.130956] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.131000] system 00:08: [io  0x0454-0x0457] has been reserved

[    0.131002] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

[    0.131093] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)

[    0.131195] pnp: PnP ACPI: found 10 devices

[    0.131196] ACPI: bus type PNP unregistered

[    0.137142] pci 0000:00:01.0: PCI bridge to [bus 01]

[    0.137146] pci 0000:00:1c.0: PCI bridge to [bus 02]

[    0.137164] pci 0000:00:1c.1: PCI bridge to [bus 03]

[    0.137180] pci 0000:00:1c.2: PCI bridge to [bus 04]

[    0.137197] pci 0000:00:1c.3: PCI bridge to [bus 05]

[    0.137213] pci 0000:00:1c.4: PCI bridge to [bus 06]

[    0.137224] pci 0000:00:1c.5: PCI bridge to [bus 07]

[    0.137227] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]

[    0.137231] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]

[    0.137235] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]

[    0.137531] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]

[    0.137533] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]

[    0.137534] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]

[    0.137535] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]

[    0.137537] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]

[    0.137538] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]

[    0.137540] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]

[    0.137541] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]

[    0.137543] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff]

[    0.137544] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]

[    0.137592] NET: Registered protocol family 2

[    0.137755] TCP established hash table entries: 32768 (order: 7, 524288 bytes)

[    0.137839] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.137895] TCP: Hash tables configured (established 32768 bind 32768)

[    0.137913] TCP: reno registered

[    0.137918] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.137931] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.137993] NET: Registered protocol family 1

[    0.138231] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling

[    0.138241] pci 0000:00:02.0: Boot video device

[    0.393347] PCI: CLS 64 bytes, default 64

[    0.393378] Unpacking initramfs...

[    1.983394] Freeing initrd memory: 10572k freed

[    1.984383] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    1.984387] software IO TLB [mem 0xb6a9c000-0xbaa9c000] (64MB) mapped at [ffff8800b6a9c000-ffff8800baa9bfff]

[    1.984736] audit: initializing netlink socket (disabled)

[    1.984748] type=2000 audit(1381345457.976:1): initialized

[    1.995886] bounce pool size: 64 pages

[    1.995890] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    1.996266] VFS: Disk quotas dquot_6.5.2

[    1.996284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    1.996347] msgmni has been set to 7741

[    1.996525] alg: No test for stdrng (krng)

[    1.996547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[    1.996580] io scheduler noop registered

[    1.996581] io scheduler deadline registered

[    1.996596] io scheduler cfq registered (default)

[    1.996655] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X

[    1.996720] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X

[    1.996824] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X

[    1.996933] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X

[    1.997037] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X

[    1.997128] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X

[    1.997194] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X

[    1.997270] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt

[    1.997273] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded

[    1.997293] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt

[    1.997298] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded

[    1.997318] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt

[    1.997323] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded

[    1.997343] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt

[    1.997348] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded

[    1.997368] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt

[    1.997374] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded

[    1.997389] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt

[    1.997393] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded

[    1.997408] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt

[    1.997410] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt

[    1.997413] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded

[    1.997422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    1.997434] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    1.997475] intel_idle: MWAIT substates: 0x1120

[    1.997475] intel_idle: v0.4 model 0x2A

[    1.997476] intel_idle: lapic_timer_reliable_states 0xffffffff

[    1.997508] GHES: HEST is not enabled!

[    1.997551] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    1.997910] Linux agpgart interface v0.103

[    1.997987] i8042: PNP: No PS/2 controller found. Probing ports directly.

[    1.998355] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.998359] serio: i8042 AUX port at 0x60,0x64 irq 12

[    1.998452] mousedev: PS/2 mouse device common for all mice

[    1.998483] rtc_cmos 00:03: RTC can wake from S4

[    1.998596] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[    1.998622] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[    1.998628] Intel P-state driver initializing.

[    1.998636] Intel pstate controlling: cpu 0

[    1.998647] Intel pstate controlling: cpu 1

[    1.998655] Intel pstate controlling: cpu 2

[    1.998669] Intel pstate controlling: cpu 3

[    1.998748] cpuidle: using governor ladder

[    1.998826] cpuidle: using governor menu

[    1.998845] drop_monitor: Initializing network drop monitor service

[    1.998896] TCP: cubic registered

[    1.998962] NET: Registered protocol family 10

[    1.999111] mip6: Mobile IPv6

[    1.999112] NET: Registered protocol family 17

[    1.999311] PM: Hibernation image not present or could not be loaded.

[    1.999318] registered taskstats version 1

[    1.999912] rtc_cmos 00:03: setting system clock to 2013-10-09 19:04:18 UTC (1381345458)

[    2.000571] Freeing unused kernel memory: 920k freed

[    2.000650] Write protecting the kernel read-only data: 6144k

[    2.001520] Freeing unused kernel memory: 436k freed

[    2.002466] Freeing unused kernel memory: 488k freed

[    2.080325] udevd[71]: starting version 175

[    2.100224] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    2.100475] r8169 0000:07:00.0: irq 47 for MSI/MSI-X

[    2.100702] r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xffffc9000063e000, 2c:41:38:9e:a7:18, XID 0c200000 IRQ 47

[    2.100707] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

[    2.101905] SCSI subsystem initialized

[    2.103135] ACPI: bus type ATA registered

[    2.108643] ACPI: bus type USB registered

[    2.108684] usbcore: registered new interface driver usbfs

[    2.108703] usbcore: registered new interface driver hub

[    2.114514] libata version 3.00 loaded.

[    2.115281] ahci 0000:00:1f.2: version 3.0

[    2.115424] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X

[    2.115798] usbcore: registered new device driver usb

[    2.116168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.116379] ehci-pci: EHCI PCI platform driver

[    2.129254] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode

[    2.129259] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 

[    2.129264] ahci 0000:00:1f.2: setting latency timer to 64

[    2.153792] scsi0 : ahci

[    2.153941] scsi1 : ahci

[    2.154041] scsi2 : ahci

[    2.154147] scsi3 : ahci

[    2.154243] scsi4 : ahci

[    2.154329] scsi5 : ahci

[    2.154405] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 48

[    2.154408] ata2: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505180 irq 48

[    2.154409] ata3: DUMMY

[    2.154410] ata4: DUMMY

[    2.154412] ata5: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505300 irq 48

[    2.154414] ata6: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505380 irq 48

[    2.154548] ehci-pci 0000:00:1a.0: setting latency timer to 64

[    2.154556] ehci-pci 0000:00:1a.0: EHCI Host Controller

[    2.154561] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[    2.154574] ehci-pci 0000:00:1a.0: debug port 2

[    2.158487] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported

[    2.158504] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe507000

[    2.169237] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[    2.169266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.169268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.169270] usb usb1: Product: EHCI Host Controller

[    2.169271] usb usb1: Manufacturer: Linux 3.10-2-amd64 ehci_hcd

[    2.169272] usb usb1: SerialNumber: 0000:00:1a.0

[    2.169456] hub 1-0:1.0: USB hub found

[    2.169461] hub 1-0:1.0: 2 ports detected

[    2.169604] ehci-pci 0000:00:1d.0: setting latency timer to 64

[    2.169610] ehci-pci 0000:00:1d.0: EHCI Host Controller

[    2.169614] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

[    2.169625] ehci-pci 0000:00:1d.0: debug port 2

[    2.173531] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported

[    2.173546] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe506000

[    2.185306] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[    2.185332] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[    2.185335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.185337] usb usb2: Product: EHCI Host Controller

[    2.185338] usb usb2: Manufacturer: Linux 3.10-2-amd64 ehci_hcd

[    2.185340] usb usb2: SerialNumber: 0000:00:1d.0

[    2.185526] hub 2-0:1.0: USB hub found

[    2.185531] hub 2-0:1.0: 2 ports detected

[    2.477268] ata6: SATA link down (SStatus 0 SControl 300)

[    2.477296] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.479816] ata5.00: ATAPI: hp      DVD A  DH16ABSH, YHD9, max UDMA/100

[    2.480768] ata5.00: configured for UDMA/100

[    2.481249] usb 1-1: new high-speed USB device number 2 using ehci-pci

[    2.481253] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    2.482341] ata1.00: ATA-8: Hitachi HDS721050CLA662, JP2OA41A, max UDMA/133

[    2.482345] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    2.483596] ata1.00: configured for UDMA/133

[    2.483865] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5

[    2.485259] ata2: SATA link down (SStatus 0 SControl 300)

[    2.494857] scsi 4:0:0:0: CD-ROM            hp       DVD A  DH16ABSH  YHD9 PQ: 0 ANSI: 5

[    2.499315] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)

[    2.499525] sd 0:0:0:0: [sda] Write Protect is off

[    2.499530] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.499581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.504837] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray

[    2.504841] cdrom: Uniform CD-ROM driver Revision: 3.20

[    2.504988] sr 4:0:0:0: Attached scsi CD-ROM sr0

[    2.506774] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    2.506896] sr 4:0:0:0: Attached scsi generic sg1 type 5

[    2.560255]  sda: sda1 sda2 < sda5 sda6 >

[    2.561124] sd 0:0:0:0: [sda] Attached SCSI disk

[    2.613714] usb 1-1: New USB device found, idVendor=8087, idProduct=0024

[    2.613720] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.614007] hub 1-1:1.0: USB hub found

[    2.614165] hub 1-1:1.0: 4 ports detected

[    2.725257] usb 2-1: new high-speed USB device number 2 using ehci-pci

[    2.857661] usb 2-1: New USB device found, idVendor=8087, idProduct=0024

[    2.857666] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    2.857948] hub 2-1:1.0: USB hub found

[    2.858023] hub 2-1:1.0: 6 ports detected

[    2.929320] usb 1-1.1: new low-speed USB device number 3 using ehci-pci

[    2.981210] tsc: Refined TSC clocksource calibration: 3292.521 MHz

[    2.981215] Switching to clocksource tsc

[    3.013211] raid6: sse2x1    5475 MB/s

[    3.081199] raid6: sse2x2    7467 MB/s

[    3.149200] raid6: sse2x4    8656 MB/s

[    3.149201] raid6: using algorithm sse2x4 (8656 MB/s)

[    3.149203] raid6: using ssse3x2 recovery algorithm

[    3.149463] xor: automatically using best checksumming function:

[    3.180036] usb 1-1.1: New USB device found, idVendor=0461, idProduct=0010

[    3.180039] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[    3.180040] usb 1-1.1: Product: USB Keyboard

[    3.182330] hidraw: raw HID events driver (C) Jiri Kosina

[    3.189189]    avx       : 25313.000 MB/sec

[    3.191082] bio: create slab <bio-1> at 1

[    3.191194] Btrfs loaded

[    3.196364] usbcore: registered new interface driver usbhid

[    3.196366] usbhid: USB HID core driver

[    3.197685] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0

[    3.197744] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:1a.0-1.1/input0

[    3.199674] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1

[    3.199722] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:1a.0-1.1/input1

[    3.249304] usb 1-1.2: new low-speed USB device number 4 using ehci-pci

[    3.346044] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c05a

[    3.346049] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    3.346052] usb 1-1.2: Product: USB Optical Mouse

[    3.346054] usb 1-1.2: Manufacturer: Logitech

[    3.348456] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2

[    3.348568] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0

[    3.421290] usb 2-1.6: new high-speed USB device number 3 using ehci-pci

[    3.437381] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)

[    3.514801] usb 2-1.6: New USB device found, idVendor=058f, idProduct=6366

[    3.514806] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    3.514808] usb 2-1.6: Product: Mass Storage Device

[    3.514810] usb 2-1.6: Manufacturer: Generic

[    3.514812] usb 2-1.6: SerialNumber: 058F63666433

[    5.752718] udevd[391]: starting version 175

[    7.717360] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3

[    7.717367] ACPI: Power Button [PWRB]

[    7.717420] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[    7.717425] ACPI: Power Button [PWRF]

[    7.736202] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29

[    7.818994] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory

[    7.819043] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29

[    7.819063] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory

[    7.819080] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29

[    7.819099] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory

[    7.819137] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29

[    7.819150] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory

[    7.819206] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    7.895077] wmi: Mapper loaded

[    8.042057] ACPI: Requesting acpi_cpufreq

[    8.143977] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt

[    8.242828] input: PC Speaker as /devices/platform/pcspkr/input/input5

[    8.336931] mei_me 0000:00:16.0: setting latency timer to 64

[    8.336984] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X

[    8.344367] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.EUSB.GPSS 1 (20130328/utaddress-251)

[    8.344376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    8.344379] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.EUSB.GPSS 1 (20130328/utaddress-251)

[    8.344386] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    8.344388] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.EUSB.GPSS 1 (20130328/utaddress-251)

[    8.344394] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    8.344396] lpc_ich: Resource conflict(s) found affecting gpio_ich

[    8.364035] iTCO_vendor_support: vendor-support=0

[    8.364467] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10

[    8.364491] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)

[    8.364647] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    8.429926] [drm] Initialized drm 1.1.0 20060810

[    8.507718] usb-storage 2-1.6:1.0: USB Mass Storage device detected

[    8.507787] scsi6 : usb-storage 2-1.6:1.0

[    8.507877] usbcore: registered new interface driver usb-storage

[    8.594671] kvm: disabled by bios

[    8.637826] kvm: disabled by bios

[    8.657793] kvm: disabled by bios

[    8.754404] [drm] Memory usable by graphics device = 2048M

[    8.754411] i915 0000:00:02.0: setting latency timer to 64

[    8.773649] i915 0000:00:02.0: irq 50 for MSI/MSI-X

[    8.773657] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).

[    8.773658] [drm] Driver supports precise vblank timestamp query.

[    8.773702] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    8.782056] [drm] Wrong MCH_SSKPD value: 0x16040307

[    8.782059] [drm] This can cause pipe underruns and display issues.

[    8.782060] [drm] Please upgrade your BIOS to fix this.

[    8.850644] fbcon: inteldrmfb (fb0) is primary device

[    9.102803] Console: switching to colour frame buffer device 240x67

[    9.108440] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[    9.108442] i915 0000:00:02.0: registered panic notifier

[    9.108459] i915: No ACPI video bus found

[    9.108485] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

[    9.417935] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X

[    9.505730] scsi 6:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0

[    9.506026] sd 6:0:0:0: Attached scsi generic sg2 type 0

[    9.507865] sd 6:0:0:0: [sdb] Attached SCSI removable disk

[    9.508239] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6

[    9.508366] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7

[    9.508513] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8

[    9.508624] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9

[    9.508735] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10

[    9.817397] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off

[   11.603689] Adding 4094972k swap on /dev/sda6.  Priority:-1 extents:1 across:4094972k 

[   11.650154] EXT4-fs (sda5): re-mounted. Opts: (null)

[   11.993538] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro

[   12.423090] device-mapper: uevent: version 1.0.3

[   12.423157] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com

[   12.808668] fuse init (API version 7.22)

[   12.843059] loop: module loaded

[   13.149382] ip_tables: (C) 2000-2006 Netfilter Core Team

[   13.216578] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[   13.342823] ip6_tables: (C) 2000-2006 Netfilter Core Team

[   20.589310] lp: driver loaded but no devices found

[   20.691814] ppdev: user-space parallel port driver

[   23.850628] r8169 0000:07:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory

[   23.992627] r8169 0000:07:00.0 eth1: link down

[   23.992683] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

[   61.764664] usb 2-1.5: new high-speed USB device number 4 using ehci-pci

[   61.871304] usb 2-1.5: New USB device found, idVendor=2001, idProduct=3c17

[   61.871310] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[   61.871312] usb 2-1.5: Product: 11n Adapter

[   61.871315] usb 2-1.5: Manufacturer: Ralink

[   61.977153] cfg80211: Calling CRDA to update world regulatory domain

[   62.100435] cfg80211: World regulatory domain updated:

[   62.100439] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[   62.100442] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   62.100445] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   62.100447] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   62.100449] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   62.100451] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   62.216649] usb 2-1.5: reset high-speed USB device number 4 using ehci-pci

[   62.316883] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3390, rev 3213 detected

[   62.332342] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000b detected

[   62.351386] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[   62.351766] usbcore: registered new interface driver rt2800usb

PunkBastard · Post Postao/la **PunkBastard** » 09 lis 2013, 20:18

Ja tu ne vidim ništa što bi moglo izazvati problem

jurastublic · Post Postao/la **jurastublic** » 09 lis 2013, 21:18

Mislim da ovaj zadnji dmesg nije kompletno kopiran.

rudar · Post Postao/la **rudar** » 10 lis 2013, 07:54

Provjerit ću i to čim stignem. A u međuvremenu ću usporediti kroz Synaptic što je instalirano u računalu s LMDE na kojem radi, a što u onom drugom gdje ne radi, i pokušati naći razliku. Mora biti neka (važna) sitnica u pitanju.

jurastublic · Post Postao/la **jurastublic** » 10 lis 2013, 08:47

Ovako napamet, kontam da ti nešto ne valja s network managerom ili s enkripcijom, alisvakako ponovi dmesg do kraja.

rudar · Post Postao/la **rudar** » 10 lis 2013, 19:14

Evo, ponavljam dmesg

Kod: Označi sve

[    0.094124] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.094172] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.107668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.107735] ACPI: No dock devices found.
[    0.107909] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.112102] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.112437] PCI host bridge to bus 0000:00
[    0.112440] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.112442] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.112443] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.112445] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.112446] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.112448] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.112449] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.112451] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[    0.112457] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.112527] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.112550] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.112577] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.112608] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.112616] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.112621] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.112624] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    0.112710] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.112732] pci 0000:00:16.0: reg 10: [mem 0xfe508000-0xfe50800f 64bit]
[    0.112802] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.112878] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.112897] pci 0000:00:1a.0: reg 10: [mem 0xfe507000-0xfe5073ff]
[    0.112980] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.113019] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.113051] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.113065] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[    0.113126] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.113195] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.113324] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.113362] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.113395] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.113524] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.113561] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.113595] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.113724] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.113762] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.113794] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.113920] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.113959] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.113987] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.114059] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.114090] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.114118] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.114190] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.114222] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.114257] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.114277] pci 0000:00:1d.0: reg 10: [mem 0xfe506000-0xfe5063ff]
[    0.114360] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.114398] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.114429] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.114564] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.114581] pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]
[    0.114588] pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]
[    0.114594] pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]
[    0.114601] pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]
[    0.114608] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    0.114615] pci 0000:00:1f.2: reg 24: [mem 0xfe505000-0xfe5057ff]
[    0.114655] pci 0000:00:1f.2: PME# supported from D3hot
[    0.114697] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.114711] pci 0000:00:1f.3: reg 10: [mem 0xfe504000-0xfe5040ff 64bit]
[    0.114730] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    0.114804] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.114886] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.114982] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.115077] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.115173] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.115240] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.115323] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.115342] pci 0000:07:00.0: reg 10: [io  0xe000-0xe0ff]
[    0.115375] pci 0000:07:00.0: reg 18: [mem 0xfe400000-0xfe400fff 64bit]
[    0.115395] pci 0000:07:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.115483] pci 0000:07:00.0: supports D1 D2
[    0.115485] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115521] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.120116] pci 0000:00:1c.5: PCI bridge to [bus 07]
[    0.120123] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.120129] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.120145] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.120253] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.120373] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    0.120632] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.120682] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.120731] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.120779] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.120828] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.120877] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.120925] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.120974] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.121041] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.121046] acpi root: \_SB_.PCI0 notify handler is installed
[    0.121071] Found 1 acpi root devices
[    0.121162] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.121164] vgaarb: loaded
[    0.121165] vgaarb: bridge control possible 0000:00:02.0
[    0.121196] PCI: Using ACPI for IRQ routing
[    0.127103] PCI: pci_cache_line_size set to 64 bytes
[    0.127147] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.127149] e820: reserve RAM buffer [mem 0xbaa9c000-0xbbffffff]
[    0.127150] e820: reserve RAM buffer [mem 0xbab05000-0xbbffffff]
[    0.127152] e820: reserve RAM buffer [mem 0xbae22000-0xbbffffff]
[    0.127153] e820: reserve RAM buffer [mem 0xbae38000-0xbbffffff]
[    0.127154] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.127156] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
[    0.127244] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.127248] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.130261] Switching to clocksource hpet
[    0.131429] pnp: PnP ACPI init
[    0.131439] ACPI: bus type PNP registered
[    0.131521] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.131523] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.131525] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.131526] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.131528] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.131531] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.131654] system 00:01: [io  0x0a40-0x0a5f] has been reserved
[    0.131655] system 00:01: [io  0x0a30-0x0a3f] has been reserved
[    0.131657] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.131685] pnp 00:02: [dma 4]
[    0.131699] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.131728] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.131745] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.131783] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.131784] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.131805] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.131947] system 00:07: [io  0x0400-0x0453] has been reserved
[    0.131949] system 00:07: [io  0x0458-0x047f] has been reserved
[    0.131951] system 00:07: [io  0x1180-0x119f] has been reserved
[    0.131952] system 00:07: [io  0x0500-0x057f] has been reserved
[    0.131954] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.131956] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.131958] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.131959] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.131961] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.132005] system 00:08: [io  0x0454-0x0457] has been reserved
[    0.132007] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.132097] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.132200] pnp: PnP ACPI: found 10 devices
[    0.132201] ACPI: bus type PNP unregistered
[    0.138307] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.138312] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.138329] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.138346] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.138361] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.138377] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.138388] pci 0000:00:1c.5: PCI bridge to [bus 07]
[    0.138391] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.138395] pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.138399] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.138691] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.138692] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.138694] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.138695] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.138696] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.138698] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.138699] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[    0.138701] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.138702] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.138704] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.138750] NET: Registered protocol family 2
[    0.138914] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.138997] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.139054] TCP: Hash tables configured (established 32768 bind 32768)
[    0.139071] TCP: reno registered
[    0.139076] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.139090] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.139152] NET: Registered protocol family 1
[    0.139389] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.139399] pci 0000:00:02.0: Boot video device
[    0.394350] PCI: CLS 64 bytes, default 64
[    0.394381] Unpacking initramfs...
[    1.984188] Freeing initrd memory: 10572k freed
[    1.985176] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.985180] software IO TLB [mem 0xb6a9c000-0xbaa9c000] (64MB) mapped at [ffff8800b6a9c000-ffff8800baa9bfff]
[    1.985527] audit: initializing netlink socket (disabled)
[    1.985539] type=2000 audit(1381428275.976:1): initialized
[    1.996638] bounce pool size: 64 pages
[    1.996642] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.997020] VFS: Disk quotas dquot_6.5.2
[    1.997039] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.997103] msgmni has been set to 7741
[    1.997286] alg: No test for stdrng (krng)
[    1.997309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.997341] io scheduler noop registered
[    1.997342] io scheduler deadline registered
[    1.997356] io scheduler cfq registered (default)
[    1.997416] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.997481] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    1.997584] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    1.997693] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    1.997798] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    1.997891] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    1.997956] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    1.998026] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.998029] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    1.998050] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.998054] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.998075] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.998080] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.998101] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.998106] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.998127] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.998132] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.998148] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.998152] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    1.998168] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    1.998169] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    1.998173] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    1.998182] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.998193] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.998242] intel_idle: MWAIT substates: 0x1120
[    1.998243] intel_idle: v0.4 model 0x2A
[    1.998244] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.998275] GHES: HEST is not enabled!
[    1.998318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.998677] Linux agpgart interface v0.103
[    1.998753] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.999130] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.999134] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.999225] mousedev: PS/2 mouse device common for all mice
[    1.999257] rtc_cmos 00:03: RTC can wake from S4
[    1.999370] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.999396] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.999402] Intel P-state driver initializing.
[    1.999410] Intel pstate controlling: cpu 0
[    1.999421] Intel pstate controlling: cpu 1
[    1.999429] Intel pstate controlling: cpu 2
[    1.999443] Intel pstate controlling: cpu 3
[    1.999521] cpuidle: using governor ladder
[    1.999600] cpuidle: using governor menu
[    1.999620] drop_monitor: Initializing network drop monitor service
[    1.999671] TCP: cubic registered
[    1.999741] NET: Registered protocol family 10
[    1.999888] mip6: Mobile IPv6
[    1.999890] NET: Registered protocol family 17
[    2.000095] PM: Hibernation image not present or could not be loaded.
[    2.000102] registered taskstats version 1
[    2.000715] rtc_cmos 00:03: setting system clock to 2013-10-10 18:04:36 UTC (1381428276)
[    2.001373] Freeing unused kernel memory: 920k freed
[    2.001450] Write protecting the kernel read-only data: 6144k
[    2.002324] Freeing unused kernel memory: 436k freed
[    2.003261] Freeing unused kernel memory: 488k freed
[    2.079156] udevd[71]: starting version 175
[    2.093829] ACPI: bus type USB registered
[    2.093860] usbcore: registered new interface driver usbfs
[    2.093872] usbcore: registered new interface driver hub
[    2.100730] usbcore: registered new device driver usb
[    2.101046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.101182] ehci-pci: EHCI PCI platform driver
[    2.101297] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.101309] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.101315] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.101331] ehci-pci 0000:00:1a.0: debug port 2
[    2.105242] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.105279] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe507000
[    2.110476] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.110706] r8169 0000:07:00.0: irq 47 for MSI/MSI-X
[    2.110883] r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xffffc90000642000, 2c:41:38:9e:a7:18, XID 0c200000 IRQ 47
[    2.110886] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.112877] SCSI subsystem initialized
[    2.114237] ACPI: bus type ATA registered
[    2.114250] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.114288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.114291] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.114294] usb usb1: Product: EHCI Host Controller
[    2.114296] usb usb1: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[    2.114298] usb usb1: SerialNumber: 0000:00:1a.0
[    2.114426] hub 1-0:1.0: USB hub found
[    2.114432] hub 1-0:1.0: 2 ports detected
[    2.114901] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.114909] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.114915] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.114929] ehci-pci 0000:00:1d.0: debug port 2
[    2.115161] libata version 3.00 loaded.
[    2.118819] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.118973] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe506000
[    2.130364] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.130390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.130393] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.130395] usb usb2: Product: EHCI Host Controller
[    2.130397] usb usb2: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[    2.130398] usb usb2: SerialNumber: 0000:00:1d.0
[    2.130538] hub 2-0:1.0: USB hub found
[    2.130544] hub 2-0:1.0: 2 ports detected
[    2.130638] ahci 0000:00:1f.2: version 3.0
[    2.130757] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[    2.146306] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.146310] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    2.146314] ahci 0000:00:1f.2: setting latency timer to 64
[    2.170948] scsi0 : ahci
[    2.171136] scsi1 : ahci
[    2.171274] scsi2 : ahci
[    2.171404] scsi3 : ahci
[    2.171533] scsi4 : ahci
[    2.171668] scsi5 : ahci
[    2.171765] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 48
[    2.171768] ata2: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505180 irq 48
[    2.171770] ata3: DUMMY
[    2.171771] ata4: DUMMY
[    2.171773] ata5: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505300 irq 48
[    2.171775] ata6: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505380 irq 48
[    2.426270] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.490280] ata6: SATA link down (SStatus 0 SControl 300)
[    2.490306] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.490329] ata2: SATA link down (SStatus 0 SControl 300)
[    2.490356] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.491413] ata1.00: ATA-8: Hitachi HDS721050CLA662, JP2OA41A, max UDMA/133
[    2.491417] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.492686] ata1.00: configured for UDMA/133
[    2.492822] ata5.00: ATAPI: hp      DVD A  DH16ABSH, YHD9, max UDMA/100
[    2.492932] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[    2.493780] ata5.00: configured for UDMA/100
[    2.499535] scsi 4:0:0:0: CD-ROM            hp       DVD A  DH16ABSH  YHD9 PQ: 0 ANSI: 5
[    2.504150] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.504206] sd 0:0:0:0: [sda] Write Protect is off
[    2.504210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.504228] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.509943] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.509947] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.510155] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.512174] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.512258] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.558616] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.558622] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.559022] hub 1-1:1.0: USB hub found
[    2.559219] hub 1-1:1.0: 4 ports detected
[    2.570708]  sda: sda1 sda2 < sda5 sda6 >
[    2.571184] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.670267] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.802555] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.802569] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.802865] hub 2-1:1.0: USB hub found
[    2.802933] hub 2-1:1.0: 6 ports detected
[    2.874324] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    2.976826] usb 1-1.1: New USB device found, idVendor=0461, idProduct=0010
[    2.976831] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.976833] usb 1-1.1: Product: USB Keyboard
[    2.979474] hidraw: raw HID events driver (C) Jiri Kosina
[    2.982212] tsc: Refined TSC clocksource calibration: 3292.521 MHz
[    2.982224] Switching to clocksource tsc
[    2.998212] raid6: sse2x1    5460 MB/s
[    3.066204] raid6: sse2x2    7135 MB/s
[    3.134205] raid6: sse2x4    8602 MB/s
[    3.134207] raid6: using algorithm sse2x4 (8602 MB/s)
[    3.134208] raid6: using ssse3x2 recovery algorithm
[    3.134453] xor: automatically using best checksumming function:
[    3.142726] usbcore: registered new interface driver usbhid
[    3.142729] usbhid: USB HID core driver
[    3.144272] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    3.144336] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:1a.0-1.1/input0
[    3.146221] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[    3.146285] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:1a.0-1.1/input1
[    3.174193]    avx       : 25327.000 MB/sec
[    3.176086] bio: create slab <bio-1> at 1
[    3.176194] Btrfs loaded
[    3.190309] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[    3.286837] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c05a
[    3.286842] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.286845] usb 1-1.2: Product: USB Optical Mouse
[    3.286847] usb 1-1.2: Manufacturer: Logitech
[    3.289662] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[    3.289789] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[    3.358350] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    3.431117] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.451909] usb 2-1.6: New USB device found, idVendor=058f, idProduct=6366
[    3.451924] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.451926] usb 2-1.6: Product: Mass Storage Device
[    3.451928] usb 2-1.6: Manufacturer: Generic
[    3.451930] usb 2-1.6: SerialNumber: 058F63666433
[    5.629852] udevd[404]: starting version 175
[    7.638437] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
[    7.730519] wmi: Mapper loaded
[    7.803394] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    7.879397] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[    7.879429] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
[    7.879444] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[    7.879457] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
[    7.879470] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[    7.879510] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
[    7.879520] platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
[    7.879607] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.911023] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    7.911029] ACPI: Power Button [PWRB]
[    7.911080] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    7.911083] ACPI: Power Button [PWRF]
[    7.977602] ACPI: Requesting acpi_cpufreq
[    8.193084] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[    8.193157] scsi6 : usb-storage 2-1.6:1.0
[    8.193235] usbcore: registered new interface driver usb-storage
[    8.208185] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    8.214021] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.EUSB.GPSS 1 (20130328/utaddress-251)
[    8.214027] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.214030] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.EUSB.GPSS 1 (20130328/utaddress-251)
[    8.214033] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.214035] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.EUSB.GPSS 1 (20130328/utaddress-251)
[    8.214039] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.214040] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.219511] mei_me 0000:00:16.0: setting latency timer to 64
[    8.219554] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[    8.232823] iTCO_vendor_support: vendor-support=0
[    8.260197] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    8.260233] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.260348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.524646] [drm] Initialized drm 1.1.0 20060810
[    8.538428] kvm: disabled by bios
[    8.631911] [drm] Memory usable by graphics device = 2048M
[    8.631919] i915 0000:00:02.0: setting latency timer to 64
[    8.655169] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[    8.655178] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.655179] [drm] Driver supports precise vblank timestamp query.
[    8.655226] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.664355] [drm] Wrong MCH_SSKPD value: 0x16040307
[    8.664358] [drm] This can cause pipe underruns and display issues.
[    8.664360] [drm] Please upgrade your BIOS to fix this.
[    8.731719] fbcon: inteldrmfb (fb0) is primary device
[    8.986247] Console: switching to colour frame buffer device 240x67
[    8.993858] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.993861] i915 0000:00:02.0: registered panic notifier
[    8.993881] i915: No ACPI video bus found
[    8.993915] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.994137] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[    9.101926] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    9.102018] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    9.102109] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    9.102195] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.102281] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.190947] scsi 6:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[    9.191226] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    9.192475] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    9.818424] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   11.405836] Adding 4094972k swap on /dev/sda6.  Priority:-1 extents:1 across:4094972k 
[   11.452436] EXT4-fs (sda5): re-mounted. Opts: (null)
[   11.796435] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   12.200253] device-mapper: uevent: version 1.0.3
[   12.200364] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[   12.585672] fuse init (API version 7.22)
[   12.619462] loop: module loaded
[   12.951565] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.010462] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   13.128339] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.291502] lp: driver loaded but no devices found
[   20.394096] ppdev: user-space parallel port driver
[   23.011161] r8169 0000:07:00.0: firmware: agent loaded rtl_nic/rtl8168e-2.fw into memory
[   23.149605] r8169 0000:07:00.0 eth1: link down
[   23.149635] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   81.907541] r8169 0000:07:00.0 eth1: link up
[   81.907551] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   88.031123] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:08:76:ff:94:c9:33:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=36855 DF PROTO=2 
[   91.492989] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  111.612952] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[  111.883953] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6387
[  111.883958] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.883961] usb 1-1.3: Product: Mass Storage
[  111.883963] usb 1-1.3: Manufacturer: Generic
[  111.883966] usb 1-1.3: SerialNumber: 8C57F4B0
[  111.884319] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[  111.884395] scsi7 : usb-storage 1-1.3:1.0
[  112.929096] scsi 7:0:0:0: Direct-Access     Alcor    Flash Disk       8.07 PQ: 0 ANSI: 2
[  112.929462] sd 7:0:0:0: Attached scsi generic sg3 type 0
[  112.930758] sd 7:0:0:0: [sdc] 4030462 512-byte logical blocks: (2.06 GB/1.92 GiB)
[  112.931375] sd 7:0:0:0: [sdc] Write Protect is off
[  112.931381] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[  112.932623] sd 7:0:0:0: [sdc] No Caching mode page present
[  112.932630] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  112.935895] sd 7:0:0:0: [sdc] No Caching mode page present
[  112.935900] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  112.937670]  sdc: sdc1
[  112.939989] sd 7:0:0:0: [sdc] No Caching mode page present
[  112.939993] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  112.939997] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[  113.332022] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  113.349232] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  132.150401] usb 1-1.3: USB disconnect, device number 5
[  148.167798] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:08:76:ff:94:c9:33:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=36897 DF PROTO=2 
[  208.313872] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:08:76:ff:94:c9:33:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=36898 DF PROTO=2 
[  268.461530] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:08:76:ff:94:c9:33:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=36899 DF PROTO=2 
[  328.599021] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:08:76:ff:94:c9:33:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=36900 DF PROTO=2 
[  388.751858] [UFW BLOCK] IN=eth1 OUT= MAC=01:00:5e:00:00:01:08:76:ff:94:c9:33:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=36902 DF PROTO=2 
[  404.226459] usb 2-1.5: new high-speed USB device number 4 using ehci-pci
[  404.332957] usb 2-1.5: New USB device found, idVendor=2001, idProduct=3c17
[  404.332962] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  404.332965] usb 2-1.5: Product: 11n Adapter
[  404.332967] usb 2-1.5: Manufacturer: Ralink
[  404.440603] cfg80211: Calling CRDA to update world regulatory domain
[  404.563918] cfg80211: World regulatory domain updated:
[  404.563923] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  404.563926] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  404.563928] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  404.563930] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  404.563932] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  404.563934] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  404.682426] usb 2-1.5: reset high-speed USB device number 4 using ehci-pci
[  404.782496] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3390, rev 3213 detected
[  404.797618] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000b detected
[  404.815257] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  404.815706] usbcore: registered new interface driver rt2800usb
[  409.403396] usb 2-1.5: USB disconnect, device number 4
[  414.976085] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
[  415.082729] usb 2-1.5: New USB device found, idVendor=2001, idProduct=3c17
[  415.082735] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  415.082738] usb 2-1.5: Product: 11n Adapter
[  415.082740] usb 2-1.5: Manufacturer: Ralink
[  415.156229] usb 2-1.5: reset high-speed USB device number 5 using ehci-pci
[  415.256350] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3390, rev 3213 detected
[  415.271404] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000b detected
[  415.271762] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'

jurastublic · Post Postao/la **jurastublic** » 10 lis 2013, 22:06

Hm, kao da ne učitava firmware. Možda je oštećena datoteka. Probaj reinstalirati firmware,

Kod: Označi sve

sudo apt-get update; sudo apt-get install --reinstall firmware-ralink

Ili možda direktno kao root kopirati taj rt2870.bin u /lib/firmware/ kad ga skineš s ralinkove stranice,
http://www.mediatek.com/_en/07_download ... php?sn=501

rudar · Post Postao/la **rudar** » 11 lis 2013, 09:07

Istina je da je na sličan način ranije riješen problem kad nije bio prepoznat printer. Ali, ako bih krenuo sa
sudo apt-get update
zar ne bih time mogao pokupiti i nešto neželjeno? Sustav redovito provjerava ima li novih nadogradnji kroz Update Manager.

jurastublic · Post Postao/la **jurastublic** » 11 lis 2013, 09:51

rudar je napisao/la:Istina je da je na sličan način ranije riješen problem kad nije bio prepoznat printer. Ali, ako bih krenuo sa
sudo apt-get update
zar ne bih time mogao pokupiti i nešto neželjeno? Sustav redovito provjerava ima li novih nadogradnji kroz Update Manager.

Ma ne, to je apt-get upgrade. apt-get update samo ažurira lokalni indeks s situacijom na serverima s kojih skida programe (tj. pogleda ima li novijih inačica programa na serverima).

Linux za Sve forum

[Riješeno] D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE

Re: D link DWA-123 i LMDE