Međutim, isti USB stick se sad neće spojiti ni pod jednom linux distribucijom osim Ubuntua 12.04
Uglavnom problem je slijedeći, USB stick se uredno instalira i OS ga prepozna (trenutno Sabayon 13.04), potom se konektira na T-Com mrežu i odmah potom napravi diskonekt.
Ako što pomogne, ispod je ispis što kaže dmesg:
Kod: Označi sve
dario@sabayon ~ $ dmesg
[ 3.901897] usb 4-1.4: Manufacturer: Sunplus IT Co
[ 3.923264] bio: create slab <bio-1> at 1
[ 4.136836] usb 4-1.6: new full-speed USB device number 4 using ehci-pci
[ 4.141990] PM: Starting manual resume from disk
[ 4.152838] VFS: could not find a valid V7 on dm-0.
[ 4.153976] UDF-fs: warning (device dm-0): udf_fill_super: No partition found (1)
[ 4.154323] EXT2-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[ 4.154456] EXT3-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[ 4.157630] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.212446] usb 4-1.6: New USB device found, idVendor=03f0, idProduct=311d
[ 4.212451] usb 4-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.928050] systemd-udevd[4485]: starting version 202
[ 5.074589] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[ 5.182823] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 5.184692] hp_accel: laptop model unknown, using default axes configuration
[ 5.185325] lis3lv02d: 8 bits 3DC sensor found
[ 5.215840] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.215940] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.216026] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.216407] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 5.216414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.216418] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 5.216423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.216424] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 5.216428] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.216429] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 5.216433] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.216435] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.216556] mei 0000:00:16.0: setting latency timer to 64
[ 5.216631] mei 0000:00:16.0: irq 54 for MSI/MSI-X
[ 5.221143] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[ 5.227013] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 5.331054] Bluetooth: Core ver 2.16
[ 5.331070] NET: Registered protocol family 31
[ 5.331072] Bluetooth: HCI device and connection manager initialized
[ 5.331079] Bluetooth: HCI socket layer initialized
[ 5.331081] Bluetooth: L2CAP socket layer initialized
[ 5.331086] Bluetooth: SCO socket layer initialized
[ 5.334960] media: Linux media interface: v0.10
[ 5.335045] usbcore: registered new interface driver btusb
[ 5.335158] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.335388] r8169 0000:25:00.0: irq 55 for MSI/MSI-X
[ 5.335526] r8169 0000:25:00.0 eth0: RTL8168e/8111e at 0xffffc90010ed8000, 64:31:50:8f:c6:d1, XID 0c200000 IRQ 55
[ 5.335529] r8169 0000:25:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.387151] Linux video capture interface: v2.00
[ 5.390330] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (1bcf:2805)
[ 5.407736] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input11
[ 5.407805] usbcore: registered new interface driver uvcvideo
[ 5.407807] USB Video Class driver (1.1.1)
[ 5.458522] sdhci: Secure Digital Host Controller Interface driver
[ 5.458525] sdhci: Copyright(c) Pierre Ossman
[ 5.459790] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[ 5.462489] cfg80211: Calling CRDA to update world regulatory domain
[ 5.520981] ath: EEPROM regdomain: 0x60
[ 5.520986] ath: EEPROM indicates we should expect a direct regpair map
[ 5.520989] ath: Country alpha2 being used: 00
[ 5.520992] ath: Regpair used: 0x60
[ 5.522632] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.522864] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011760000, irq=19
[ 5.532926] sdhci-pci 0000:23:00.0: SDHCI controller found [197b:2392] (rev 30)
[ 5.532993] mmc0: no vqmmc regulator found
[ 5.532996] mmc0: no vmmc regulator found
[ 5.555626] mmc0: SDHCI controller on PCI [0000:23:00.0] using DMA
[ 5.555654] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 5.555677] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
[ 5.608353] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[ 5.619441] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
[ 5.619817] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
[ 5.620182] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.650769] usbcore: registered new interface driver ath3k
[ 5.722392] cfg80211: World regulatory domain updated:
[ 5.722395] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.722398] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.722401] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.722403] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.722405] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.722407] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.809077] iTCO_vendor_support: vendor-support=0
[ 5.809557] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.809607] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.809734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.849547] usb 4-1.6: USB disconnect, device number 4
[ 5.882405] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 5.918403] kvm: disabled by bios
[ 5.927697] kvm: disabled by bios
[ 5.931666] kvm: disabled by bios
[ 5.936535] kvm: disabled by bios
[ 6.281619] usb 4-1.6: new full-speed USB device number 5 using ehci-pci
[ 6.367372] usb 4-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[ 6.367378] usb 4-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.428468] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1397, fw id: 780218
[ 6.473560] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 6.553379] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
[ 6.703478] usb 1-1.3: New USB device found, idVendor=04f3, idProduct=00a4
[ 6.703490] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 6.703496] usb 1-1.3: Product: 2.4G RX
[ 6.783862] input: 2.4G RX as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[ 6.784224] hid-generic 0003:04F3:00A4.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G RX] on usb-0000:00:1a.0-1.3/input0
[ 7.648953] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 7.786919] Adding 10190844k swap on /dev/mapper/vg_sabayon-lv_swap. Priority:-1 extents:1 across:10190844k SS
[ 7.831266] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.971068] ZFS: Loaded module v0.6.0-rc14, ZFS pool version 5000, ZFS filesystem version 5
[ 8.697547] fbcondecor: console 0 using theme 'sabayon'
[ 8.753277] fbcondecor: switched decor state to 'on' on console 0
[ 8.811262] fbcondecor: console 1 using theme 'sabayon'
[ 8.867402] fbcondecor: switched decor state to 'on' on console 1
[ 8.925772] fbcondecor: console 2 using theme 'sabayon'
[ 8.981687] fbcondecor: switched decor state to 'on' on console 2
[ 9.039362] fbcondecor: console 3 using theme 'sabayon'
[ 9.095191] fbcondecor: switched decor state to 'on' on console 3
[ 9.153440] fbcondecor: console 4 using theme 'sabayon'
[ 9.209174] fbcondecor: switched decor state to 'on' on console 4
[ 9.267036] fbcondecor: console 5 using theme 'sabayon'
[ 9.323442] fbcondecor: switched decor state to 'on' on console 5
[ 9.381248] fbcondecor: console 6 using theme 'sabayon'
[ 9.437144] fbcondecor: switched decor state to 'on' on console 6
[ 9.495018] fbcondecor: console 7 using theme 'sabayon'
[ 9.550926] fbcondecor: switched decor state to 'on' on console 7
[ 9.608819] fbcondecor: console 8 using theme 'sabayon'
[ 9.665065] fbcondecor: switched decor state to 'on' on console 8
[ 9.723259] fbcondecor: console 9 using theme 'sabayon'
[ 9.779028] fbcondecor: switched decor state to 'on' on console 9
[ 9.837303] fbcondecor: console 10 using theme 'sabayon'
[ 9.893210] fbcondecor: switched decor state to 'on' on console 10
[ 9.951490] fbcondecor: console 11 using theme 'sabayon'
[ 10.007485] fbcondecor: switched decor state to 'on' on console 11
[ 10.907175] fbcondecor: switched decor state to 'off' on console 6
[ 10.967864] fbcondecor: console 6 using theme 'sabayon'
[ 11.003359] fbcondecor: switched decor state to 'on' on console 6
[ 11.654438] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.761959] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.777614] NET: Registered protocol family 10
[ 11.780524] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.508935] ata1.00: configured for UDMA/133
[ 12.508947] ata1: EH complete
[ 12.509261] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 13.088389] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.249392] 8021q: 802.1Q VLAN Support v1.8
[ 13.440326] EXT4-fs (dm-0): re-mounted. Opts: commit=600
[ 13.444345] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 13.445728] r8169 0000:25:00.0 eth0: link down
[ 13.445763] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 74.532184] usb 4-1.1: new high-speed USB device number 6 using ehci-pci
[ 74.978059] usb 4-1.1: New USB device found, idVendor=12d1, idProduct=1c0b
[ 74.978071] usb 4-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 74.978078] usb 4-1.1: Product: HUAWEI Mobile
[ 74.978084] usb 4-1.1: Manufacturer: HUAWEI
[ 74.980630] scsi8 : usb-storage 4-1.1:1.0
[ 74.981147] scsi9 : usb-storage 4-1.1:1.1
[ 76.610193] usb 4-1.1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110
[ 77.544294] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 77.544304] scsi 9:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 77.590917] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 77.593435] sr1: scsi-1 drive
[ 77.593912] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 77.594183] sr 8:0:0:0: Attached scsi generic sg3 type 5
[ 77.594418] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 77.621115] usb 4-1.1: USB disconnect, device number 6
[ 77.623273] scsi 9:0:0:0: rejecting I/O to offline device
[ 77.623287] scsi 9:0:0:0: killing request
[ 77.645568] udevd[6960]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
[ 77.657915] udevd[6960]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
[ 82.967487] usb 4-1.1: new high-speed USB device number 7 using ehci-pci
[ 83.404702] usb 4-1.1: New USB device found, idVendor=12d1, idProduct=1c05
[ 83.404708] usb 4-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 83.404712] usb 4-1.1: Product: HUAWEI Mobile
[ 83.404715] usb 4-1.1: Manufacturer: HUAWEI
[ 83.407009] scsi10 : usb-storage 4-1.1:1.3
[ 83.407200] scsi11 : usb-storage 4-1.1:1.4
[ 83.413074] usbcore: registered new interface driver usbserial
[ 83.413097] usbcore: registered new interface driver usbserial_generic
[ 83.413113] usbserial: USB Serial support registered for generic
[ 83.415235] usbcore: registered new interface driver option
[ 83.415257] usbserial: USB Serial support registered for GSM modem (1-port)
[ 83.415381] option 4-1.1:1.0: GSM modem (1-port) converter detected
[ 83.415499] usb 4-1.1: GSM modem (1-port) converter now attached to ttyUSB0
[ 83.415520] option 4-1.1:1.1: GSM modem (1-port) converter detected
[ 83.415591] usb 4-1.1: GSM modem (1-port) converter now attached to ttyUSB1
[ 83.415615] option 4-1.1:1.2: GSM modem (1-port) converter detected
[ 83.415684] usb 4-1.1: GSM modem (1-port) converter now attached to ttyUSB2
[ 85.961505] scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 85.961853] scsi 11:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 86.026902] sr1: scsi-1 drive
[ 86.027031] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 86.027122] sr 10:0:0:0: Attached scsi generic sg2 type 5
[ 86.029033] sd 11:0:0:0: Attached scsi generic sg3 type 0
[ 86.031166] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[ 86.043290] traps: udisks-daemon[6819] trap int3 ip:7feb25fe1abb sp:7fff74b0a040 error:0
[ 152.816934] PPP generic driver version 2.4.2
[ 632.050554] ata1.00: configured for UDMA/133
[ 632.050566] ata1: EH complete
[ 632.050833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 632.398776] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[ 632.412258] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 632.684032] PM: Syncing filesystems ... done.
[ 632.789852] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 632.800590] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 632.811637] Suspending console(s) (use no_console_suspend to debug)
[ 632.812230] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 632.813622] sd 0:0:0:0: [sda] Stopping disk
[ 632.815690] option1 ttyUSB0: option_instat_callback: error -2
[ 632.876447] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
[ 633.151059] PM: suspend of devices complete after 339.782 msecs
[ 633.151236] PM: late suspend of devices complete after 0.174 msecs
[ 633.151442] pcieport 0000:00:1c.7: System wakeup enabled by ACPI
[ 633.162029] r8169 0000:25:00.0: System wakeup enabled by ACPI
[ 633.184014] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 633.195142] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 633.216861] PM: noirq suspend of devices complete after 65.718 msecs
[ 633.217530] ACPI: Preparing to enter system sleep state S3
[ 633.231923] PM: Saving platform NVS memory
[ 633.235753] Disabling non-boot CPUs ...
[ 633.237353] smpboot: CPU 1 is now offline
[ 633.237564] CPU 1 offline: Remove Rx thread
[ 633.239272] smpboot: CPU 2 is now offline
[ 633.239430] CPU 2 offline: Remove Rx thread
[ 633.240827] smpboot: CPU 3 is now offline
[ 633.240965] CPU 3 offline: Remove Rx thread
[ 633.241099] Extended CMOS year: 2000
[ 633.242076] ACPI: Low-level resume complete
[ 633.242117] PM: Restoring platform NVS memory
[ 633.242550] Extended CMOS year: 2000
[ 633.242601] Enabling non-boot CPUs ...
[ 633.242659] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 633.255876] bnx2i: CPU 1 online: Create Rx thread
[ 633.256118] CPU1 is up
[ 633.256163] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 633.269453] bnx2i: CPU 2 online: Create Rx thread
[ 633.269685] CPU2 is up
[ 633.269718] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 633.283009] bnx2i: CPU 3 online: Create Rx thread
[ 633.283244] CPU3 is up
[ 633.286407] ACPI: Waking up from system sleep state S3
[ 633.356107] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 633.363092] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 633.385053] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 633.451016] pcieport 0000:00:1c.7: System wakeup disabled by ACPI
[ 633.451096] PM: noirq resume of devices complete after 127.601 msecs
[ 633.451250] PM: early resume of devices complete after 0.111 msecs
[ 633.451275] i915 0000:00:02.0: setting latency timer to 64
[ 633.451301] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 633.451355] mei 0000:00:16.0: irq 53 for MSI/MSI-X
[ 633.451421] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[ 633.451442] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 633.451458] ahci 0000:00:1f.2: setting latency timer to 64
[ 633.451527] r8169 0000:25:00.0: System wakeup disabled by ACPI
[ 633.668834] usb 4-1.4: reset high-speed USB device number 3 using ehci-pci
[ 633.757504] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 633.760499] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 633.763649] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 633.763664] ata2.00: configured for UDMA/133
[ 633.832609] usb 4-1.6: reset full-speed USB device number 5 using ehci-pci
[ 633.859352] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 633.860131] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 633.860938] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 633.860978] ata1.00: configured for UDMA/133
[ 633.871489] sd 0:0:0:0: [sda] Starting disk
[ 633.873271] Extended CMOS year: 2000
[ 633.917618] usb 4-1.6: device firmware changed
[ 634.111180] PM: resume of devices complete after 660.909 msecs
[ 634.111427] Restarting tasks ... done.
[ 634.113005] video LNXVIDEO:00: Restoring backlight state
[ 634.113967] fbcondecor: switched decor state to 'off' on console 6
[ 634.114096] usb 4-1.6: USB disconnect, device number 5
[ 634.180621] usb 4-1.6: new full-speed USB device number 8 using ehci-pci
[ 634.190947] fbcondecor: console 6 using theme 'sabayon'
[ 634.192999] fbcondecor: switched decor state to 'on' on console 6
[ 634.212885] ata1.00: configured for UDMA/133
[ 634.212891] ata1: EH complete
[ 634.213054] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 634.215194] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 634.255522] usb 4-1.6: New USB device found, idVendor=03f0, idProduct=311d
[ 634.255527] usb 4-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 634.258835] EXT4-fs (dm-0): re-mounted. Opts: commit=600
[ 634.265243] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 634.459271] r8169 0000:25:00.0 eth0: link down
[ 634.459353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 634.732333] usb 4-1.6: USB disconnect, device number 8
[ 634.780183] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 635.164598] usb 4-1.6: new full-speed USB device number 9 using ehci-pci
[ 635.250491] usb 4-1.6: New USB device found, idVendor=0cf3, idProduct=3005
[ 635.250502] usb 4-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 684.741533] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 883.192570] usb 4-1.1: USB disconnect, device number 7
[ 883.194846] option1 ttyUSB0: option_instat_callback: error -108
[ 883.195088] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 883.195121] option 4-1.1:1.0: device disconnected
[ 883.195631] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 883.195667] option 4-1.1:1.1: device disconnected
[ 883.196033] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 883.196063] option 4-1.1:1.2: device disconnected
[ 890.604489] usb 1-1.3: USB disconnect, device number 3
[ 896.150003] usb 4-1.1: new low-speed USB device number 10 using ehci-pci
[ 896.286339] usb 4-1.1: New USB device found, idVendor=04f3, idProduct=00a4
[ 896.286351] usb 4-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 896.286358] usb 4-1.1: Product: 2.4G RX
[ 896.367389] input: 2.4G RX as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input15
[ 896.367935] hid-generic 0003:04F3:00A4.0002: input,hidraw0: USB HID v1.10 Keyboard [2.4G RX] on usb-0000:00:1d.0-1.1/input0
[ 896.545232] usb 4-1.2: new high-speed USB device number 11 using ehci-pci
[ 896.991992] usb 4-1.2: New USB device found, idVendor=12d1, idProduct=1c0b
[ 896.992004] usb 4-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 896.992011] usb 4-1.2: Product: HUAWEI Mobile
[ 896.992017] usb 4-1.2: Manufacturer: HUAWEI
[ 896.994371] scsi12 : usb-storage 4-1.2:1.0
[ 896.994758] scsi13 : usb-storage 4-1.2:1.1
[ 898.676330] usb 4-1.2: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110
[ 899.557882] scsi 12:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 899.557901] scsi 13:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 899.600023] sr1: scsi-1 drive
[ 899.600400] sr 12:0:0:0: Attached scsi CD-ROM sr1
[ 899.600836] sr 12:0:0:0: Attached scsi generic sg2 type 5
[ 899.601501] sd 13:0:0:0: Attached scsi generic sg2 type 0
[ 899.603561] sd 13:0:0:0: [sdb] Attached SCSI removable disk
[ 899.630329] usb 4-1.2: USB disconnect, device number 11
[ 899.632469] scsi 13:0:0:0: rejecting I/O to offline device
[ 899.632483] scsi 13:0:0:0: killing request
[ 899.667874] udevd[9254]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
[ 899.694427] udevd[9254]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
[ 904.840987] usb 4-1.2: new high-speed USB device number 12 using ehci-pci
[ 904.928098] usb 4-1.2: New USB device found, idVendor=12d1, idProduct=1c05
[ 904.928111] usb 4-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 904.928118] usb 4-1.2: Product: HUAWEI Mobile
[ 904.928123] usb 4-1.2: Manufacturer: HUAWEI
[ 904.930285] option 4-1.2:1.0: GSM modem (1-port) converter detected
[ 904.930554] usb 4-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[ 904.930784] option 4-1.2:1.1: GSM modem (1-port) converter detected
[ 904.930977] usb 4-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[ 904.931164] option 4-1.2:1.2: GSM modem (1-port) converter detected
[ 904.931386] usb 4-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[ 904.931826] scsi14 : usb-storage 4-1.2:1.3
[ 904.932319] scsi15 : usb-storage 4-1.2:1.4
[ 907.968663] scsi 15:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 907.968713] scsi 14:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 908.030285] sr1: scsi-1 drive
[ 908.030443] sr 14:0:0:0: Attached scsi CD-ROM sr1
[ 908.030536] sr 14:0:0:0: Attached scsi generic sg2 type 5
[ 908.030802] sd 15:0:0:0: Attached scsi generic sg3 type 0
[ 908.032638] sd 15:0:0:0: [sdb] Attached SCSI removable disk
[ 1042.697918] usb 4-1.2: USB disconnect, device number 12
[ 1042.700204] option1 ttyUSB0: option_instat_callback: error -108
[ 1042.700562] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1042.700605] option 4-1.2:1.0: device disconnected
[ 1042.700924] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1042.700957] option 4-1.2:1.1: device disconnected
[ 1042.701255] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1042.701285] option 4-1.2:1.2: device disconnected
[ 1122.194977] usb 4-1.1: USB disconnect, device number 10
[ 1124.748448] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[ 1124.898565] usb 1-1.3: New USB device found, idVendor=04f3, idProduct=00a4
[ 1124.898576] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1124.898583] usb 1-1.3: Product: 2.4G RX
[ 1124.979443] input: 2.4G RX as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16
[ 1124.979784] hid-generic 0003:04F3:00A4.0003: input,hidraw0: USB HID v1.10 Keyboard [2.4G RX] on usb-0000:00:1a.0-1.3/input0
[ 1132.779341] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 1132.793253] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c0b
[ 1132.793264] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1132.793271] usb 2-1: Product: HUAWEI Mobile
[ 1132.793277] usb 2-1: Manufacturer: HUAWEI
[ 1132.796159] scsi16 : usb-storage 2-1:1.0
[ 1132.796766] scsi17 : usb-storage 2-1:1.1
[ 1133.386927] usb 2-1: USB disconnect, device number 2
[ 1138.626626] usb 2-1: new high-speed USB device number 3 using xhci_hcd
[ 1138.641064] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c05
[ 1138.641075] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1138.641082] usb 2-1: Product: HUAWEI Mobile
[ 1138.641088] usb 2-1: Manufacturer: HUAWEI
[ 1138.644448] option 2-1:1.0: GSM modem (1-port) converter detected
[ 1138.644696] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 1138.644879] option 2-1:1.1: GSM modem (1-port) converter detected
[ 1138.645014] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 1138.645157] option 2-1:1.2: GSM modem (1-port) converter detected
[ 1138.645282] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 1138.645580] scsi18 : usb-storage 2-1:1.3
[ 1138.646220] scsi19 : usb-storage 2-1:1.4
[ 1141.746516] scsi 18:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1141.746754] scsi 19:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 1141.826619] sr1: scsi-1 drive
[ 1141.826783] sr 18:0:0:0: Attached scsi CD-ROM sr1
[ 1141.826890] sr 18:0:0:0: Attached scsi generic sg2 type 5
[ 1141.829968] sd 19:0:0:0: Attached scsi generic sg3 type 0
[ 1141.833495] sd 19:0:0:0: [sdb] Attached SCSI removable disk
dario@sabayon ~ $
ih Hauwei .. net sad privremeno imam no problem nije riješen