[Riješeno] EZTV858 USB DVB-T

[Tomislav001]

nista od ovog.ali kad ukopcam usb kaže mi da ima novi driver dostupan.kad otvorim instaliraj nove drivere otvori se samo lista drivera grafičku

[Tomislav001]

evo ispis kad sam promijenio smp_lock.h u smp.h:

Kod: Označi sve

root@Tomislav-PC:/home/tomislav# cd '/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC' 
root@Tomislav-PC:/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC# make clean
root@Tomislav-PC:/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC# make
make -C /lib/modules/3.2.0-34-generic/build SUBDIRS=/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC modules
make[1]: Ulazim u direktorij `/usr/src/linux-headers-3.2.0-34-generic'
  CC [M]  /home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135-core.o
In file included from /home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135-core.c:1:0:
/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135.h:15:21: fatal error: dvb-usb.h: Nema takve datoteke ili direktorija
compilation terminated.
make[2]: *** [/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135-core.o] Greška 1
make[1]: *** [_module_/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC] Greška 2
make[1]: Izlazim iz direktorija `/usr/src/linux-headers-3.2.0-34-generic'
make: *** [default] Greška 2
root@Tomislav-PC:/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC#

[Tomislav001]

Kada skinem media_build i pokrenem ./build dobijem ovo

Kod: Označi sve

root@Tomislav-PC:/home/tomislav# git clone git://linuxtv.org/media_build.git
fatal: destination path 'media_build' already exists and is not an empty directory.
root@Tomislav-PC:/home/tomislav# cd media_build 
root@Tomislav-PC:/home/tomislav/media_build# ./build
Checking if the needed tools for Ubuntu 12.04.1 LTS are available
Needed package dependencies are met.

************************************************************
* This script will download the latest tarball and build it*
* Assuming that your kernel is compatible with the latest  *
* drivers. If not, you'll need to add some extra backports,*
* ./backports/<kernel> directory.                          *
* It will also update this tree to be sure that all compat *
* bits are there, to avoid compilation failures            *
************************************************************
************************************************************
* All drivers and build system are under GPLv2 License     *
* Firmware files are under the license terms found at:     *
* http://www.linuxtv.org/downloads/firmware/               *
* Please abort if you don't agree with the license         *
************************************************************

****************************
Updating the building system
****************************
From git://linuxtv.org/media_build
 * branch            master     -> FETCH_HEAD
Already up-to-date.
make: Ulazim u direktorij `/home/tomislav/media_build/linux'
wget http://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5 -O linux-media.tar.bz2.md5.tmp
--2012-12-02 22:20:20--  http://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5
Tražim linuxtv.org (linuxtv.org)... 130.149.80.248, 8295:50f8:60:1468:ee::1
Spajanje na linuxtv.org (linuxtv.org)|130.149.80.248|:80... spojen.
HTTP zahtjev poslan, čeka se odgovor... 200 OK
Veličina: 93 [application/x-bzip2]
Spremanje u: `linux-media.tar.bz2.md5.tmp'

100%[======================================>] 93          --.-K/s   in 0s      

2012-12-02 22:20:21 (6,92 MB/s) - `linux-media.tar.bz2.md5.tmp' preuzeto [93/93]

make: Izlazim iz direktorija `/home/tomislav/media_build/linux'
make: Ulazim u direktorij `/home/tomislav/media_build/linux'
tar xfj linux-media.tar.bz2
rm -f .patches_applied .linked_dir .git_log.md5
make: Izlazim iz direktorija `/home/tomislav/media_build/linux'
**********************************************************
* Downloading firmwares from linuxtv.org.                *
**********************************************************
dvb-fe-bcm3510-01.fw
dvb-fe-or51132-qam.fw
dvb-fe-or51132-vsb.fw
dvb-fe-or51211.fw
dvb-fe-xc5000-1.6.114.fw
dvb-ttpci-01.fw-261a
dvb-ttpci-01.fw-261b
dvb-ttpci-01.fw-261c
dvb-ttpci-01.fw-261d
dvb-ttpci-01.fw-261f
dvb-ttpci-01.fw-2622
dvb-usb-avertv-a800-02.fw
dvb-usb-bluebird-01.fw
dvb-usb-dib0700-1.20.fw
dvb-usb-dibusb-5.0.0.11.fw
dvb-usb-dibusb-6.0.0.8.fw
dvb-usb-dtt200u-01.fw
dvb-usb-terratec-h5-drxk.fw
dvb-usb-terratec-h7-az6007.fw
dvb-usb-terratec-h7-drxk.fw
dvb-usb-umt-010-02.fw
dvb-usb-vp702x-01.fw
dvb-usb-vp7045-01.fw
dvb-usb-wt220u-01.fw
dvb-usb-wt220u-02.fw
v4l-cx231xx-avcore-01.fw
v4l-cx23418-apu.fw
v4l-cx23418-cpu.fw
v4l-cx23418-dig.fw
v4l-cx23885-avcore-01.fw
v4l-cx23885-enc.fw
v4l-cx25840.fw
******************
* Start building *
******************
make -C /home/tomislav/media_build/v4l allyesconfig
make[1]: Ulazim u direktorij `/home/tomislav/media_build/v4l'
make[2]: Entering directory `/home/tomislav/media_build/linux'
Applying patches for kernel 3.2.0-34-generic
patch -s -f -N -p1 -i ../backports/api_version.patch
patch -s -f -N -p1 -i ../backports/pr_fmt.patch
patch -s -f -N -p1 -i ../backports/v3.5_dmabuf_removal.patch
Patched drivers/media/dvb-core/dvbdev.c
Patched drivers/media/v4l2-core/v4l2-dev.c
Patched drivers/media/rc/rc-main.c
make[2]: Leaving directory `/home/tomislav/media_build/linux'
./scripts/make_kconfig.pl /lib/modules/3.2.0-34-generic/build /lib/modules/3.2.0-34-generic/build 1
Preparing to compile for kernel version 3.2.0

***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.

If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.

Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:

cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install

Please see your distro's web site for instructions to build a new kernel.

WARNING: This is the V4L/DVB backport tree, with experimental drivers
	 backported to run on legacy kernels from the development tree at:
		http://git.linuxtv.org/media-tree.git.
	 It is generally safe to use it for testing a new driver or
	 feature, but its usage on production environments is risky.
	 Don't use it in production. You've been warned.
VIDEO_CODA: Requires at least kernel 3.6.0
VIDEO_MEM2MEM_DEINTERLACE: Requires at least kernel 3.3.0
VIDEO_M5MOLS: Requires at least kernel 3.6.0
VIDEO_S5K4ECGX: Requires at least kernel 3.4.0
Created default (all yes) .config file
./scripts/fix_kconfig.pl
make[1]: Izlazim iz direktorija `/home/tomislav/media_build/v4l'
make -C /home/tomislav/media_build/v4l 
make[1]: Ulazim u direktorij `/home/tomislav/media_build/v4l'
./scripts/make_myconfig.pl
make[1]: Izlazim iz direktorija `/home/tomislav/media_build/v4l'
make[1]: Ulazim u direktorij `/home/tomislav/media_build/v4l'
perl scripts/make_config_compat.pl /lib/modules/3.2.0-34-generic/build ./.myconfig ./config-compat.h
creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/home/tomislav/media_build/v4l/firmware'
make[2]: Leaving directory `/home/tomislav/media_build/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/tomislav/media_build/v4l/firmware'
make[2]: Nothing to be done for `default'.
make[2]: Leaving directory `/home/tomislav/media_build/v4l/firmware'
Kernel build directory is /lib/modules/3.2.0-34-generic/build
make -C ../linux apply_patches
make[2]: Entering directory `/home/tomislav/media_build/linux'
Patches for 3.2.0-34-generic already applied.
make[2]: Leaving directory `/home/tomislav/media_build/linux'
make -C /lib/modules/3.2.0-34-generic/build SUBDIRS=/home/tomislav/media_build/v4l  modules
make[2]: Entering directory `/usr/src/linux-headers-3.2.0-34-generic'
  CC [M]  /home/tomislav/media_build/v4l/altera-lpt.o
  CC [M]  /home/tomislav/media_build/v4l/altera-jtag.o
  CC [M]  /home/tomislav/media_build/v4l/altera-comp.o
  CC [M]  /home/tomislav/media_build/v4l/altera.o
  CC [M]  /home/tomislav/media_build/v4l/au0828-core.o
  CC [M]  /home/tomislav/media_build/v4l/au0828-i2c.o
  CC [M]  /home/tomislav/media_build/v4l/au0828-cards.o
  CC [M]  /home/tomislav/media_build/v4l/au0828-dvb.o
  CC [M]  /home/tomislav/media_build/v4l/au0828-video.o
  CC [M]  /home/tomislav/media_build/v4l/au0828-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-dma.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-pci.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-usb.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-fe-tuner.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-i2c.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-sram.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-eeprom.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-misc.o
  CC [M]  /home/tomislav/media_build/v4l/flexcop-hw-filter.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-driver.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-cards.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-if.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-risc.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-i2c.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-gpio.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-input.o
  CC [M]  /home/tomislav/media_build/v4l/bttv-audio-hook.o
  CC [M]  /home/tomislav/media_build/v4l/cpia2_v4l.o
  CC [M]  /home/tomislav/media_build/v4l/cpia2_usb.o
  CC [M]  /home/tomislav/media_build/v4l/cpia2_core.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-alsa-main.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-alsa-pcm.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-driver.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-cards.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-i2c.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-firmware.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-gpio.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-queue.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-streams.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-fileops.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-ioctl.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-controls.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-mailbox.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-audio.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-video.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-irq.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-av-core.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-av-audio.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-av-firmware.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-av-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-scb.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-dvb.o
  CC [M]  /home/tomislav/media_build/v4l/cx18-io.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-audio.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-video.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-i2c.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-cards.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-core.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-avcore.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-417.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-pcb-cfg.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/cx231xx-input.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-cards.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-video.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-core.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-i2c.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-dvb.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-417.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-ioctl.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-ir.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-av.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-input.o
  CC [M]  /home/tomislav/media_build/v4l/cx23888-ir.o
  CC [M]  /home/tomislav/media_build/v4l/netup-init.o
  CC [M]  /home/tomislav/media_build/v4l/cimax2.o
  CC [M]  /home/tomislav/media_build/v4l/netup-eeprom.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-f300.o
  CC [M]  /home/tomislav/media_build/v4l/cx23885-alsa.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-core.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-cards.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-i2c.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-gpio.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-medusa-video.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-video.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-video-upstream.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-video-upstream-ch2.o
  CC [M]  /home/tomislav/media_build/v4l/cx25821-audio-upstream.o
  CC [M]  /home/tomislav/media_build/v4l/cx25840-core.o
  CC [M]  /home/tomislav/media_build/v4l/cx25840-audio.o
  CC [M]  /home/tomislav/media_build/v4l/cx25840-firmware.o
  CC [M]  /home/tomislav/media_build/v4l/cx25840-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/cx25840-ir.o
  CC [M]  /home/tomislav/media_build/v4l/cx88-video.o
^A  CC [M]  /home/tomislav/media_build/v4l/cx88-vbi.o
  CC [M]  /home/tomislav/media_build/v4l/cx88-mpeg.o
  CC [M]  /home/tomislav/media_build/v4l/cx88-cards.o
  CC [M]  /home/tomislav/media_build/v4l/cx88-core.o
 itd...

što je to

[Netko]

Prije svega, loša je praksa bilosta tako instaliravat iz source u /usr/ osim ako dobro znas sta radis...

Ukljuci taj vrag u usb port i daj
lsusb
i
dmesg

EDIT:
Ovaj zadnji post ti je pretpostavljam buildanje modula za kernel koji ih nema... To ti isto nije tako pametno radit ako neznas sta radis...

[Tomislav001]

lsusb:

Kod: Označi sve

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 004: ID 062a:7223 Creative Labs 
Bus 001 Device 006: ID 21ee:1100  
Bus 002 Device 003: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 001 Device 012: ID 048d:9005 Integrated Technology Express, Inc. 

dmesg:

Kod: Označi sve

[    0.304940] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.304942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.304944] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.304945] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.304947] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.304949] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.304951] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.304953] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.304955] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.304957] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.304958] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.304960] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.304962] pci_bus 0000:02: resource 1 [mem 0xdef00000-0xdfffffff]
[    0.304964] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xddffffff 64bit pref]
[    0.304998] NET: Registered protocol family 2
[    0.305100] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.305878] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.308335] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.308633] TCP: Hash tables configured (established 524288 bind 65536)
[    0.308635] TCP reno registered
[    0.308646] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.308673] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.308767] NET: Registered protocol family 1
[    0.308954] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.308969] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    0.881526] Freeing initrd memory: 13880k freed
[    0.888049] pci 0000:00:02.0: PCI INT A disabled
[    0.888192] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.888207] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.888237] pci 0000:00:02.1: PCI INT B disabled
[    0.888277] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888321] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888374] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888425] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888476] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888588] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888650] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.888665] pci 0000:02:00.0: Boot video device
[    0.888673] PCI: CLS 64 bytes, default 64
[    0.888862] PCI-DMA: Disabling AGP.
[    0.891202] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    0.891203] PCI-DMA: using GART IOMMU.
[    0.891205] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.893702] IBS: LVT offset 1 assigned
[    0.893717] perf: AMD IBS detected (0x0000001f)
[    0.893868] audit: initializing netlink socket (disabled)
[    0.893878] type=2000 audit(1354480642.888:1): initialized
[    0.912317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.914133] VFS: Disk quotas dquot_6.5.2
[    0.914182] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.914617] fuse init (API version 7.17)
[    0.914742] msgmni has been set to 7901
[    0.915145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.915174] io scheduler noop registered
[    0.915176] io scheduler deadline registered
[    0.915222] io scheduler cfq registered (default)
[    0.915338] pcieport 0000:00:09.0: setting latency timer to 64
[    0.915363] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.915448] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.915464] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.915524] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.915539] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.915608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.915632] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.915737] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.915741] ACPI: Power Button [PWRB]
[    0.915773] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.915775] ACPI: Power Button [PWRF]
[    0.917548] ERST: Table is not found!
[    0.917549] GHES: HEST is not enabled!
[    0.917643] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.937969] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.020765] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.021104] Linux agpgart interface v0.103
[    1.022452] brd: module loaded
[    1.023243] loop: module loaded
[    1.023418] pata_acpi 0000:00:06.0: setting latency timer to 64
[    1.023558] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    1.023572] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[    1.023582] pata_acpi 0000:00:08.0: setting latency timer to 64
[    1.023586] pata_acpi 0000:00:08.0: PCI INT A disabled
[    1.023692] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    1.023701] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[    1.023710] pata_acpi 0000:00:08.1: setting latency timer to 64
[    1.023714] pata_acpi 0000:00:08.1: PCI INT B disabled
[    1.023942] Fixed MDIO Bus: probed
[    1.023956] tun: Universal TUN/TAP device driver, 1.6
[    1.023957] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.024086] PPP generic driver version 2.4.2
[    1.024203] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.024221] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[    1.024243] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    1.024245] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    1.024280] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.024299] ehci_hcd 0000:00:02.1: debug port 1
[    1.024305] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    1.024323] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdeefac00
[    1.036046] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.036195] hub 1-0:1.0: USB hub found
[    1.036198] hub 1-0:1.0: 10 ports detectedBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 004: ID 062a:7223 Creative Labs 
Bus 001 Device 006: ID 21ee:1100  
Bus 002 Device 003: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 001 Device 012: ID 048d:9005 Integrated Technology Express, Inc. 
[    1.036302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.036352] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    1.036372] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    1.036374] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    1.036453] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.036480] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdeefb000
[    1.094179] hub 2-0:1.0: USB hub found
[    1.094184] hub 2-0:1.0: 10 ports detected
[    1.094282] uhci_hcd: USB Universal Host Controller Interface driver
[    1.094335] usbcore: registered new interface driver libusual
[    1.094366] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.094808] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.094817] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.094971] mousedev: PS/2 mouse device common for all mice
[    1.095101] rtc_cmos 00:02: RTC can wake from S4
[    1.095248] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.095284] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.095349] device-mapper: uevent: version 1.0.3
[    1.095436] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.095442] cpuidle: using governor ladder
[    1.095443] cpuidle: using governor menu
[    1.095445] EFI Variables Facility v0.08 2004-May-17
[    1.095599] TCP cubic registered
[    1.095674] NET: Registered protocol family 10
[    1.096027] NET: Registered protocol family 17
[    1.096030] Registering the dns_resolver key type
[    1.096150] PM: Hibernation image not present or could not be loaded.
[    1.096158] registered taskstats version 1
[    1.100821]   Magic number: 8:888:648
[    1.100872] processor LNXCPU:01: hash matches
[    1.100923] rtc_cmos 00:02: setting system clock to 2012-12-02 20:37:23 UTC (1354480643)
[    1.100929] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00)
[    1.100954] powernow-k8:    0 : pstate 0 (3000 MHz)
[    1.100956] powernow-k8:    1 : pstate 1 (2300 MHz)
[    1.100957] powernow-k8:    2 : pstate 2 (1800 MHz)
[    1.100958] powernow-k8:    3 : pstate 3 (800 MHz)
[    1.101356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.101358] EDD information not available.
[    1.102576] Freeing unused kernel memory: 924k freed
[    1.102747] Write protecting the kernel read-only data: 12288k
[    1.106786] Freeing unused kernel memory: 1608k freed
[    1.110194] Freeing unused kernel memory: 1196k freed
[    1.128298] udevd[84]: starting version 175
[    1.158017] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.158177] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    1.158182] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[    1.158186] forcedeth 0000:00:07.0: setting latency timer to 64
[    1.221098] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr f4:6d:04:70:9e:00
[    1.221102] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.221152] pata_amd 0000:00:06.0: version 0.4.1
[    1.221186] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.221423] scsi0 : pata_amd
[    1.221498] scsi1 : pata_amd
[    1.221951] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.221953] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.222000] sata_nv 0000:00:08.0: version 3.5
[    1.222008] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[    1.222040] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.222202] scsi2 : sata_nv
[    1.222248] scsi3 : sata_nv
[    1.222316] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[    1.222318] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[    1.222334] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[    1.222352] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.222510] scsi4 : sata_nv
[    1.222556] scsi5 : sata_nv
[    1.222624] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[    1.222626] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[    1.348049] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.408410] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 2.00, max UDMA/66
[    1.408415] ata1.01: ATAPI: HL-DT-ST GCE-8527B, 1.02, max UDMA/33
[    1.408421] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15)
[    1.408425] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15)
[    1.424346] ata1.00: configured for UDMA/66
[    1.472285] ata1.01: configured for UDMA/33
[    1.474761] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 2.00 PQ: 0 ANSI: 5
[    1.476513] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.476517] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.476641] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.476693] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.477148] scsi 0:0:1:0: CD-ROM            HL-DT-ST CD-RW GCE-8527B  1.02 PQ: 0 ANSI: 5
[    1.480536] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[    1.480724] sr 0:0:1:0: Attached scsi CD-ROM sr1
[    1.480787] hub 1-1:1.0: USB hub found
[    1.480803] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.480845] hub 1-1:1.0: 4 ports detected
[    1.480953] ata2: port disabled--ignoring
[    1.542283] ata5: SATA link down (SStatus 0 SControl 300)
[    1.592053] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    1.688065] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.712686] ata3.00: ATA-8: WDC WD1600AAJS-00Z0A0, 01.03E01, max UDMA/133
[    1.712689] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.728736] ata3.00: configured for UDMA/133
[    1.728916] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
[    1.729066] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.729143] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.729171] sd 2:0:0:0: [sda] Write Protect is off
[    1.729173] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.729185] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.787426]  sda: sda1 sda2 < sda5 >
[    1.787721] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.892049] Refined TSC clocksource calibration: 3013.705 MHz.
[    1.892055] Switching to clocksource tsc
[    2.032105] usb 1-1.4: new full-speed USB device number 6 using ehci_hcd
[    2.050283] ata4: SATA link down (SStatus 0 SControl 300)
[    2.085493] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.370259] ata6: SATA link down (SStatus 0 SControl 300)
[    2.436069] usb 2-3: new full-speed USB device number 2 using ohci_hcd
[    2.956042] usb 2-4: new low-speed USB device number 3 using ohci_hcd
[    6.180353] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.566569] Adding 4192252k swap on /dev/sda5.  Priority:-1 extents:1 across:4192252k 
[    6.684870] udevd[407]: starting version 175
[    7.841241] lp: driver loaded but no devices found
[    8.691778] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.247874] parport_pc 00:05: reported by Plug and Play ACPI
[    9.247919] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.255744] ppdev: user-space parallel port driver
[    9.344355] lp0: using parport0 (interrupt-driven).
[    9.471995] ACPI: resource nForce2_smbus [io  0x0600-0x063f] conflicts with ACPI region SMRG [io 0x600-0x6ff]
[    9.471999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.472077] i2c i2c-0: nForce2 SMBus adapter at 0x700
[    9.494170] MCE: In-kernel MCE decoding enabled.
[    9.512125] EDAC MC: Ver: 2.1.0
[    9.823707] AMD64 EDAC driver v3.4.0
[    9.823745] EDAC amd64: DRAM ECC disabled.
[    9.823753] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    9.823755]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    9.823756]  (Note that use of the override may cause unknown side effects.)
[   10.314016] Bluetooth: Core ver 2.16
[   10.314039] NET: Registered protocol family 31
[   10.314040] Bluetooth: HCI device and connection manager initialized
[   10.314043] Bluetooth: HCI socket layer initialized
[   10.314045] Bluetooth: L2CAP socket layer initialized
[   10.314049] Bluetooth: SCO socket layer initialized
[   10.341275] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   10.341555] usbcore: registered new interface driver btusb
[   10.705238] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
[   10.705427] generic-usb 0003:062A:7223.0001: input,hidraw0: USB HID v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input0
[   10.711267] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input3
[   10.711351] generic-usb 0003:062A:7223.0002: input,hidraw1: USB HID v1.10 Keyboard [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input1
[   10.717262] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4
[   10.717339] generic-usb 0003:062A:0201.0003: input,hidraw2: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-4/input0
[   10.727361] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input5
[   10.727492] generic-usb 0003:062A:0201.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.0-4/input1
[   10.727509] usbcore: registered new interface driver usbhid
[   10.727511] usbhid: USB HID core driver
[   11.382198] nvidia: module license 'NVIDIA' taints kernel.
[   11.382202] Disabling lock debugging due to kernel taint
[   11.431706] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[   11.431723] nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[   11.431729] nvidia 0000:02:00.0: setting latency timer to 64
[   11.431733] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   11.432032] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.43  Sun Aug 19 20:14:03 PDT 2012
[   11.593578] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   11.593584] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[   11.593587] hda_intel: Disabling MSI
[   11.593606] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   12.293674] type=1400 audit(1354480654.690:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=733 comm="apparmor_parser"
[   12.293693] type=1400 audit(1354480654.690:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=734 comm="apparmor_parser"
[   12.294056] type=1400 audit(1354480654.690:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"
[   12.294079] type=1400 audit(1354480654.690:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=734 comm="apparmor_parser"
[   12.294257] type=1400 audit(1354480654.690:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser"
[   12.294285] type=1400 audit(1354480654.690:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=734 comm="apparmor_parser"
[   12.909481] type=1400 audit(1354480655.306:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=831 comm="apparmor_parser"
[   12.909502] type=1400 audit(1354480655.306:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=830 comm="apparmor_parser"
[   13.156153] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[   13.156226] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[   13.156283] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   13.156329] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   13.156578] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   13.156910] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[   13.156925] snd_hda_intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[   13.156927] hda_intel: Disabling MSI
[   13.156974] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[   14.172041] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[   14.196042] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[   14.220041] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[   14.244044] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[   14.244136] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input11
[   14.244354] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input12
[   14.244404] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input13
[   14.244452] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input14
[   17.587202] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   17.587205] vesafb: scrolling: redraw
[   17.587208] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   17.587616] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90011380000, using 1216k, total 1216k
[   17.587746] Console: switching to colour frame buffer device 80x30
[   17.587755] fb0: VESA VGA frame buffer device
[   17.697651] type=1400 audit(1354480660.094:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=942 comm="apparmor_parser"
[   17.698104] type=1400 audit(1354480660.094:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=942 comm="apparmor_parser"
[   17.766422] Bluetooth: RFCOMM TTY layer initialized
[   17.766426] Bluetooth: RFCOMM socket layer initialized
[   17.766428] Bluetooth: RFCOMM ver 1.11
[   17.787202] init: failsafe main process (865) killed by TERM signal
[   17.873112] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.873115] Bluetooth: BNEP filters: protocol multicast
[   23.825333] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   25.475197] type=1400 audit(1354480667.870:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1068 comm="apparmor_parser"
[   25.475595] type=1400 audit(1354480667.870:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser"
[   25.475797] type=1400 audit(1354480667.870:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser"
[   25.610440] type=1400 audit(1354480668.006:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1067 comm="apparmor_parser"
[   25.676788] type=1400 audit(1354480668.074:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1071 comm="apparmor_parser"
[   25.677244] type=1400 audit(1354480668.074:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1071 comm="apparmor_parser"
[   25.680192] type=1400 audit(1354480668.078:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1072 comm="apparmor_parser"
[   25.680665] type=1400 audit(1354480668.078:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1072 comm="apparmor_parser"
[   25.871876] type=1400 audit(1354480668.270:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1073 comm="apparmor_parser"
[   25.873902] type=1400 audit(1354480668.270:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1077 comm="apparmor_parser"
[   28.813613] vboxdrv: Found 2 processor cores.
[   28.813814] vboxdrv: fAsync=0 offMin=0x386 offMax=0xc11
[   28.813862] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   28.813864] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[   29.338790] vboxpci: IOMMU not found (not registered)
[   34.184027] eth0: no IPv6 routers present
[   38.533657] NVRM: GPU at 0000:02:00: GPU-db3f6a76-a166-5e7f-4d3e-38ba540724b3
[   38.533663] NVRM: Your system is not currently configured to drive a VGA console
[   38.533666] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   38.533668] NVRM: requires the use of a text-mode VGA console. Use of other console
[   38.533670] NVRM: drivers including, but not limited to, vesafb, may result in
[   38.533671] NVRM: corruption and stability problems, and is not supported.
[   78.201535] ISO 9660 Extensions: Microsoft Joliet Level 3
[   78.239706] ISOFS: changing to secondary root
[  101.848281] usb 1-1.2: new high-speed USB device number 7 using ehci_hcd
[  103.377488] WARNING: You are using an experimental version of the media stack.
[  103.377492] 	As the driver is backported to an older kernel, it doesn't offer
[  103.377496] 	enough quality for its usage in production.
[  103.377499] 	Use it with care.
[  103.377501] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  103.377504] 	d8658bca2e5696df2b6c69bc5538f8fe54e4a01e [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
[  103.377508] 	b057c3c32229c0db914c03eefb2579d877612926 [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
[  103.377512] 	e023a11342b6624cc019c8cecfc488882f0721f9 [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
[  103.442289] WARNING: You are using an experimental version of the media stack.
[  103.442295] 	As the driver is backported to an older kernel, it doesn't offer
[  103.442299] 	enough quality for its usage in production.
[  103.442301] 	Use it with care.
[  103.442303] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[  103.442307] 	d8658bca2e5696df2b6c69bc5538f8fe54e4a01e [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
[  103.442311] 	b057c3c32229c0db914c03eefb2579d877612926 [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
[  103.442315] 	e023a11342b6624cc019c8cecfc488882f0721f9 [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
[  103.600348] usbcore: registered new interface driver dvb_usb_it913x
[  103.603461] it913x: Chip Version=01 Chip Type=9135
[  103.605475] it913x: Remote propriety (raw) mode
[  103.605955] it913x: Dual mode=0 Tuner Type=0
[  103.607963] usb 1-1.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[  103.697617] usb 1-1.2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[  103.697632] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[  103.697656] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnected
[  803.201258] usb 1-1.2: USB disconnect, device number 7
[  807.240280] usb 1-1.2: new high-speed USB device number 8 using ehci_hcd
[  807.342990] it913x: Chip Version=01 Chip Type=9135
[  807.345088] it913x: Remote propriety (raw) mode
[  807.345616] it913x: Dual mode=0 Tuner Type=0
[  807.347616] usb 1-1.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[  807.352767] usb 1-1.2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[  807.352782] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[  807.352804] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnected
[  950.924998] usb 1-1.2: USB disconnect, device number 8
[ 3026.788155] usb 1-1.2: new high-speed USB device number 9 using ehci_hcd
[ 3026.886183] it913x: Chip Version=01 Chip Type=9135
[ 3026.905092] it913x: Remote propriety (raw) mode
[ 3026.906142] it913x: Dual mode=0 Tuner Type=0
[ 3026.908196] usb 1-1.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[ 3027.084741] usb 1-1.2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[ 3027.084757] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[ 3027.084779] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnected
[ 3186.580391] usb 1-1.2: USB disconnect, device number 9
[ 3195.180779] usb 1-2: USB disconnect, device number 3
[ 3195.436121] usb 2-3: USB disconnect, device number 2
[ 3205.672106] usb 2-3: new full-speed USB device number 4 using ohci_hcd
[ 3205.894419] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input15
[ 3205.894734] generic-usb 0003:062A:7223.0005: input,hidraw0: USB HID v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input0
[ 3205.900517] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input16
[ 3205.900758] generic-usb 0003:062A:7223.0006: input,hidraw1: USB HID v1.10 Keyboard [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input1
[ 3209.264112] usb 1-2: new high-speed USB device number 12 using ehci_hcd
[ 3209.402354] it913x: Chip Version=01 Chip Type=9135
[ 3209.404353] it913x: Remote propriety (raw) mode
[ 3209.404857] it913x: Dual mode=0 Tuner Type=0
[ 3209.406990] usb 1-2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[ 3209.410367] usb 1-2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[ 3209.410382] usb 1-2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[ 3209.410404] usb 1-2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnected

[Netko]

Kolko kuzim, tebi treba samo firmware, modul vec postoji u 3.2 kernelu...
Gledao sam ako ima gdje firmware koji trebas zapakiran ali nema... Inace, firmware koji ti trebas je includean u 3.3 kernelu po defaultu... Ja bi ti savjetovo da jednostavno stavis noviji kernel, ili jos bolje - instaliras distru koja dolazi s novijim kernelom.

A mozes i rucno probat(napomena: nemam pojma kolko je ovo pametno):
wget https://raw.github.com/torvalds/linux/m ... b_firmware
perl get_dvb_firmware it9135
onda dobis dva filea i njih kopiras u /lib/firmware/
Vidi:
http://linuxtv.org/wiki/index.php/ITE_IT9135 (tebi treba firmware za ITE Inc. Generic 9005 Device)
http://linuxtv.org/wiki/index.php/Firmw ... e_Firmware

[Tomislav001]

kad stavim instalirati novi kernel dobijem ove greške

Kod: Označi sve

root@Tomislav-PC:/tmp# sudo dpkg -i linux-headers-3.3.0-generic_amd64.deb
dpkg: error processing linux-headers-3.3.0-generic_amd64.deb (--install):
 linux-headers-3.3.0-030300-generic: 3.3.0-030300.201203182135 (Multi-Arch: no) is not co-installable with linux-headers-3.3.0-030300-generic:i386 3.3.0-030300.201203182135 (Multi-Arch: no) which is currently installed
Errors were encountered while processing:
 linux-headers-3.3.0-generic_amd64.deb


Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 3.3.0-030300-generic /boot/vmlinuz-3.3.0-030300-generic
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information.
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/nvidia-173/173.14.35/build/make.log for more information.
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/nvidia-current/295.40/build/make.log for more information.
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/nvidia-current-updates/304.43/build/make.log for more information.

[Netko]

Kaze ti da imas instalirane i386 headere koji se ne slazu s amd64 headerima koje pokusavas instalirat... Imas li 32bitni sistem ili 64bitni?

EDIT:
I cisto da te upozorim: i stavljanje novog kernela vjerojatno nije bez rizika, tako da...radi to na vlastitu odgovornost.
Ma ustvari, kad razmislim, stavljanje novog kernela bi vjerojatno donjelo vise problema nego da ides ovom zadnjom metodom(samo stavljanje firmwarea u /lib/firmware)... Kad razmislim, firmware nebi trebao bit vezan za verziju kernela pa vjerojatno i nebi trebalo bit nekih problema...
Ispricavam se na ne bas najpametnijem savjetu.

[Tomislav001]

imam 64 bit sustav i instalirao sam 64 bitni kernel

i kad staviš novi kernel i neradi možeš se vratiti na stari kod boota tako da nije veliki rizik

uspio sam bootati u 3.3.0 kernel ali nemam podrške za grafičku (Nvidia GeForce GT 440/PCIe/SSE2 ) pa je rezolucija 800x600
i u 3.3.0 imaju driveri za dvb

ali vratio sam 3.2 zbog grafičke

edit: kernel sam instalirao po uputama sa ove stranice http://askubuntu.com/questions/142192/c ... untu-12-04
ali što je PAE -kernel?

[Tomislav001]

nijedan od kernela koje sam dosad probao mi neradi

3.3.0
3.3.4
3.3.6
3.4.0

ništa jedino je 3.3.0 radio ali kao što sam rekao nije bilo drivera za grafičku,jel mi možete vi dečki pokazati kako da nistaliram 3.3.* kernel
da radi