debian i airlive wl1600usb

sehrz · Post Postao/la **sehrz** » 16 pro 2011, 17:31

root@racunalo:/home/racunalo/compat-wireless-3.1.1-1# make

make -C /lib/modules/2.6.32-5-686/build M=/home/racunalo/compat-wireless-3.1.1-1 modules

make[1]: Entering directory `/usr/src/linux-headers-2.6.32-5-686'[code]

CC [M] /home/racunalo/compat-wireless-3.1.1-1/compat/main.o

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:28,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.33.h:58: error: redefinition of ‘netdev_alloc_skb_ip_align’

/usr/src/linux-headers-2.6.32-5-common/include/linux/skbuff.h

error: previous definition of ‘netdev_alloc_skb_ip_align’ was here

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.33.h:121: error: redefinition of ‘pci_pcie_cap’

/usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h

error: previous definition of ‘pci_pcie_cap’ was here

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:29,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.34.h:223:1: warning: "DEFINE_DMA_UNMAP_ADDR" redefined

In file included from /usr/src/linux-headers-2.6.32-5-common/include/linux/dmaengine.h:26,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/skbuff.h:30,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/if_ether.h:124,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/netdevice.h:29,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24,

from <command-line>:0:

/usr/src/linux-headers-2.6.32-5-common/include/linux/dma-mapping.h:243:1: warning: this is the location of the previous definition

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:29,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.34.h:224:1: warning: "DEFINE_DMA_UNMAP_LEN" redefined

In file included from /usr/src/linux-headers-2.6.32-5-common/include/linux/dmaengine.h:26,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/skbuff.h:30,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/if_ether.h:124,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/netdevice.h:29,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24,

from <command-line>:0:

/usr/src/linux-headers-2.6.32-5-common/include/linux/dma-mapping.h:244:1: warning: this is the location of the previous definition

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:29,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.34.h:225:1: warning: "dma_unmap_addr" redefined

In file included from /usr/src/linux-headers-2.6.32-5-common/include/linux/dmaengine.h:26,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/skbuff.h:30,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/if_ether.h:124,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/netdevice.h:29,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24,

from <command-line>:0:

/usr/src/linux-headers-2.6.32-5-common/include/linux/dma-mapping.h:245:1: warning: this is the location of the previous definition

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:29,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.34.h:226:1: warning: "dma_unmap_addr_set" redefined

In file included from /usr/src/linux-headers-2.6.32-5-common/include/linux/dmaengine.h:26,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/skbuff.h:30,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/if_ether.h:124,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/netdevice.h:29,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24,

from <command-line>:0:

/usr/src/linux-headers-2.6.32-5-common/include/linux/dma-mapping.h:246:1: warning: this is the location of the previous definition

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:29,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.34.h:227:1: warning: "dma_unmap_len" redefined

In file included from /usr/src/linux-headers-2.6.32-5-common/include/linux/dmaengine.h:26,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/skbuff.h:30,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/if_ether.h:124,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/netdevice.h:29,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24,

from <command-line>:0:

/usr/src/linux-headers-2.6.32-5-common/include/linux/dma-mapping.h:247:1: warning: this is the location of the previous definition

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:29,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.34.h:228:1: warning: "dma_unmap_len_set" redefined

In file included from /usr/src/linux-headers-2.6.32-5-common/include/linux/dmaengine.h:26,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/skbuff.h:30,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/if_ether.h:124,

from /usr/src/linux-headers-2.6.32-5-common/include/linux/netdevice.h:29,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.29.h:5,

from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:24,

from <command-line>:0:

/usr/src/linux-headers-2.6.32-5-common/include/linux/dma-mapping.h:248:1: warning: this is the location of the previous definition

In file included from /home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.h:29,

from <command-line>:0:

/home/racunalo/compat-wireless-3.1.1-1/include/linux/compat-2.6.34.h:231: error: redefinition of ‘dma_set_coherent_mask’

/usr/src/linux-headers-2.6.32-5-common/include/linux/dma-mapping.h:131: error: previous definition of ‘dma_set_coherent_mask’ was here

make[5]: *** [/home/racunalo/compat-wireless-3.1.1-1/compat/main.o] Error 1

make[4]: *** [/home/racunalo/compat-wireless-3.1.1-1/compat] Error 2

make[3]: *** [_module_/home/racunalo/compat-wireless-3.1.1-1] Error 2

make[2]: *** [sub-make] Error 2

make[1]: *** [all] Error 2

make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-5-686'

make: *** [modules] Error 2

root@racunalo:/home/racunalo/compat-wireless-3.1.1-1# lsusb

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 003 Device 002: ID 04fc:0801 Sunplus Technology Co., Ltd

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 003: ID 1b75:8189 Ovislink Corp.

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@racunalo:/home/racunalo/compat-wireless-3.1.1-1# uname -a
[/code]
Linux racunalo 2.6.32-5-686 #1 SMP Mon Oct 3 04:15:24 UTC 2011 i686 GNU/Linux

hehe malo je dugacko ali evo ga :)neznam kak se ubacuje da bude krace ona...

Lutherus · Post Postao/la **Lutherus** » 16 pro 2011, 17:33

Kod: Označi sve

ili koristiš code gumbić

Post Postao/la **Cooleech** » 16 pro 2011, 17:39

Lutherus je napisao/la:
Kod: Označi sve
 
ili koristiš code gumbić

Malo bedasto izgleda, pa da pojasnim:

Kod: Označi sve

pa napišeš/zalijepiš kod ili štogod već iz terminala, a završavaš sa istim tim [code], samo ispred "code" staviš /.

sehrz · Post Postao/la **sehrz** » 16 pro 2011, 17:54

e jeb*** ekipa nek netko od admina ovo sredi na mobitelu sam o ovdje malo steka jer ima veliki broj znakova

ps: kad promijenim hostname u etc/hostname nece mi se otvoriti niti jedna aplikacija dok ne resetiram sustav
pokusao sam promijeniti i sa naredbom hostname i isto se desava ima li netko neki prijedlog hvala

drone · Post Postao/la **drone** » 16 pro 2011, 18:51

meema je napisao/la:meni je navedena wireless kartica radila bez problema na ubuntu, sa drajverima koji su dosli uz CD...

Taj wifi radi na svakom linuxu kojeg sam isprobao. Na Ubuntuima i Mintu nisu bili ni potrebni driveri s CD-a, samo sam ju uštekao.

Koristim te wifi adaptere (imam ih 2) skoro tri godine i podržani su bar toliko vremena u samom kernelu. Ispočetka nije radila samo ledica (radila je s driverima s CD-a), ali već dosta dugo radi i ta sitnica bez ikakvih instalacija sa strane. Radila je čak i na LFS-u sa starim 2.6.16 kernelom s driverima s CD-a.

Ne znam zašto u ovom slučaju ne radi. Nadam se da nisu mijenjali chipset ili nešto

Ako je hardverski ostalo sve isto, mora proraditi s defaultnim modulima, CD ti ni ne treba. Moguće je jedino ako se dodaje nakon instalacije da moduli ne budu učitani, pa ih je potrebno ručno učitati. Primjerice pod Mintom 11 učitani moduli su rtl8187, mac80211, cfg80211, eeprom_93cx6.

sehrz · Post Postao/la **sehrz** » 16 pro 2011, 19:01

trenutno imam ndiswrapper i moram uzeti .inf file od rtl8187b chipseta i radi ko novo iskreno mislim da mi ni na ubuntu 10.10 nije htjela raditi tako da iskreno neznam kartica je nova stara 4 dana...

glaskoncILLa · Post Postao/la **glaskoncILLa** » 16 pro 2011, 19:41

rebootaj komp pa onda pukni dmesg, pa pasteaj output ovdje.

sehrz · Post Postao/la **sehrz** » 16 pro 2011, 20:06

glaskoncILLa je napisao/la:rebootaj komp pa onda pukni dmesg, pa pasteaj output ovdje.

Kod: Označi sve

 28.240017] usb 1-5: new high speed USB device using ehci_hcd and address 4

[  128.380349] usb 1-5: New USB device found, idVendor=1b75, idProduct=8189

[  128.380355] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[  128.380360] usb 1-5: Product: AirLive WL1600USB

[  128.380363] usb 1-5: Manufacturer: Manufacturer_Realtek

[  128.380367] usb 1-5: SerialNumber: 00e04c000001

[  128.380646] usb 1-5: configuration #1 chosen from 1 choice

[  128.500019] usb 1-5: reset high speed USB device using ehci_hcd and address 4

[  128.656238] ndiswrapper: driver net8187b (Realtek Semiconductor Corp.,03/31/2010,6.1163.0331.2010) loaded

[  129.685333] wlan0: ethernet device 00:4f:78:01:d9:5b using NDIS driver: net8187b, version: 0x1, NDIS version: 0x500, vendor: 'Realtek RTL8187 Wireless LAN USB NIC                                     ', 1B75:8189.F.conf

[  129.685374] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK

[  129.873301] ADDRCONF(NETDEV_UP): wlan0: link is not ready

racunalo@racunalo:~$

nadam se da ce pomoc , kad sam upisao tu naredbu prikazalo se puno tog pa ne
vidim vrh jer se nece pomaknut gore

iako je ovo zadnji dio i vezan je za adapter...

moram reci da je ovo radi iako pise da link nije ready ...

glaskoncILLa · Post Postao/la **glaskoncILLa** » 16 pro 2011, 20:26

daj ubij ndiswraper, pa ponovo restartaj i ponovo dmesg.

sehrz · Post Postao/la **sehrz** » 16 pro 2011, 20:40

glaskoncILLa je napisao/la:daj ubij ndiswraper, pa ponovo restartaj i ponovo dmesg.

Kod: Označi sve

  1.278726] Uniform CD-ROM driver Revision: 3.20

[    1.278832] sr 1:0:0:0: Attached scsi CD-ROM sr0

[    1.282071]  sda5 > sda3 sda4

[    1.282415] sd 0:0:0:0: [sda] Attached SCSI disk

[    1.289925] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    1.290406] sr 1:0:0:0: Attached scsi generic sg1 type 5

[    1.480516] usb 1-5: new high speed USB device using ehci_hcd and address 3

[    1.619593] usb 1-5: New USB device found, idVendor=1b75, idProduct=8189

[    1.619597] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    1.619600] usb 1-5: Product: AirLive WL1600USB

[    1.619603] usb 1-5: Manufacturer: Manufacturer_Realtek

[    1.619605] usb 1-5: SerialNumber: 00e04c000001

[    1.619692] usb 1-5: configuration #1 chosen from 1 choice

[    1.726864] kjournald starting.  Commit interval 5 seconds

[    1.726875] EXT3-fs: mounted filesystem with ordered data mode.

[    1.860021] usb 3-1: new full speed USB device using uhci_hcd and address 2

[    2.034331] usb 3-1: New USB device found, idVendor=04fc, idProduct=0801

[    2.034335] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[    2.034338] usb 3-1: Product: USB Multi-Smart Mouse

[    2.034429] usb 3-1: configuration #1 chosen from 1 choice

[    2.758315] udev[326]: starting version 164

[    3.040476] input: PC Speaker as /devices/platform/pcspkr/input/input1

[    3.430900] processor LNXCPU:00: registered as cooling_device0

[    3.431142] ACPI: SSDT 3f6e7f80 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)

[    3.431328] processor LNXCPU:01: registered as cooling_device1

[    3.442152] input: Power Button as /devices/LNXSYSTM:00/LNXS


mislim da je ovo dio sa podatcima o wifi kartici :)/

Linux za Sve forum

debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb

Re: debian i airlive wl1600usb