Stranica: 1/4.
VIRTUALBOX pokretanje
Postano: 23 lis 2012, 13:30
Postao/la redundant
nisam znao gdje bi stavio ovaj post pa ako admini imaju neko prikladnije mjesto neka ga slobodno prebace...
Trebaju mi za fax 32bitni windowsi pa sam ih odučio staviti u virtualnu mašinu na svom susetu 12.2 KDE. Instalirao sam virtualbox iz yasta,al nikako ga pokrenuti. Kad ga pokrećenm sa ALT+ f2 ili iz menija (system ->emulator) samo skaće ona ikonica groe-dole par sekundi i ništa...kad pobam iz terminala mi izbaci:
Kod: Označi sve
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.4.11-2.16-desktop) or it failed to
load. Please recompile the kernel module and install it by
sudo /etc/init.d/vboxdrv setup
You will not be able to start VMs until this problem is fixed.
/usr/bin/virtualbox: line 77: /usr/lib/virtualbox/VirtualBox: Permission denied
/usr/bin/virtualbox: line 77: exec: /usr/lib/virtualbox/VirtualBox: cannot execute: Permission denied
to rekompajliranje kernel modula u trćem redu mi baš ne zvuči napeto...
Pa sam ga instalirao sa oraclovih stranic...ista stvar
probao sam i u virtaulnu mašinu koja mi je došla sa susetom (system-> virtualization->create virtual machines) pa mi yast izbaci error:
pa kad idem na details mi kaže:
Kod: Označi sve
libvir: RPC error : Failed to connect socket to '/var/run/libvirt/libvirt-sock': No such file or directory
libvir: RPC error : Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': No such file or directory
Error: Failed to connect socket to '/var/run/libvirt/libvirt-sock-ro': No such file or directory
Ako netko ima rješenje za gore navedene probleme ili preporuku za neki treći softver na zadanu temu, molim da mi odgovori.
Obećavam da nisam nisam odustao o slobodnog softvera i da ću windowse koristiti isključivo u edukativne svrhe

Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 13:51
Postao/la tomog999
Jesi instalirao dkms prije samog virtualbox-a,
pogledaj jel imaš sad uopće dkms instaliran.
Uvijek prije same instalacije virtualboxa provjeriti sa packet managerom da li je instaliran dkms paket,
ako nije, obvezno ga treba instalirati.
Bez tog paketa sistem nemože prilikom instalacije buildati Vbox kernel module (drivere potrebne za rad virtualne mašine),
specifične za verziju kernela koju trenutno vrtiš, odnosno verziju Virtualboxa koji vrtiš.
Or something like that.

Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 14:00
Postao/la shicy
ili sa sudo, ako koristiš isti
evo, iz jednog drugog topica, čovik sa openSUSE-om:
sumski je napisao/la:evo, ovak izgleda kod mene na gušteru (imam vbox sa stranica instaliran)
Kod: Označi sve
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules done
Uninstalling old VirtualBox DKMS kernel modules done
Removing old VirtualBox pci kernel module done
Removing old VirtualBox netadp kernel module done
Removing old VirtualBox netflt kernel module done
Removing old VirtualBox kernel module done
Trying to register the VirtualBox kernel modules using DKMS failed
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules done
Starting VirtualBox kernel modules done
Napravim modprobe vboxdrv i šljaka.
Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 17:29
Postao/la PunkBastard
jesi insalirao kernel header-e ?
Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 18:48
Postao/la redundant
evo me nazad sa novim kompletom pitanja...
@ tomog999
hvala, nisam to znao. Sad sam i to instalirao, pa preinstalirao virtualbox, pa restartao, al ne pomaže...
@Shicy ne znam meni ta datoteka izgleda skroz drugačije ali ima neku kao metodu setup():
Kod: Označi sve
#! /bin/sh
# Oracle VM VirtualBox
# Linux kernel module init script
#
# Copyright (C) 2006-2010 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#
# chkconfig: 35 20 80
# description: VirtualBox Linux kernel module
#
### BEGIN INIT INFO
# Provides: vboxdrv
# Required-Start: $syslog
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: VirtualBox Linux kernel module
### END INIT INFO
PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH
DEVICE=/dev/vboxdrv
LOG="/var/log/vbox-install.log"
NOLSB=yes
DEBIAN=
VERSION=4.2.2
MODPROBE=/sbin/modprobe
if $MODPROBE -c | grep -q '^allow_unsupported_modules *0'; then
MODPROBE="$MODPROBE --allow-unsupported-modules"
fi
[ -f /lib/lsb/init-functions ] || NOLSB=yes
[ -f /etc/vbox/vbox.cfg ] && . /etc/vbox/vbox.cfg
export BUILD_TYPE
export USERNAME
export USER=$USERNAME
if [ -n "$INSTALL_DIR" ]; then
VBOXMANAGE="$INSTALL_DIR/VBoxManage"
MODULE_SRC="$INSTALL_DIR/src/vboxhost"
else
VBOXMANAGE="/usr/lib/virtualbox/VBoxManage"
MODULE_SRC="/usr/share/virtualbox/src/vboxhost"
fi
BUILDINTMP="$MODULE_SRC/build_in_tmp"
DODKMS="$MODULE_SRC/do_dkms"
# silently exit if the package was uninstalled but not purged,
# applies to Debian packages only
[ -z "$DEBIAN" -o -x $VBOXMANAGE -a -x $BUILDINTMP ] || exit 0
if [ -n "$NOLSB" ]; then
if [ -f /etc/redhat-release ]; then
system=redhat
elif [ -f /etc/SuSE-release ]; then
system=suse
elif [ -f /etc/gentoo-release ]; then
system=gentoo
fi
fi
[ -r /etc/default/virtualbox ] && . /etc/default/virtualbox
if [ -z "$NOLSB" ]; then
. /lib/lsb/init-functions
fail_msg() {
echo ""
log_failure_msg "$1"
}
succ_msg() {
log_end_msg 0
}
begin_msg() {
log_daemon_msg "$@"
}
else
if [ "$system" = "redhat" ]; then
. /etc/init.d/functions
fail_msg() {
echo -n " "
echo_failure
echo
echo " ($1)"
}
succ_msg() {
echo -n " "
echo_success
echo
}
elif [ "$system" = "suse" ]; then
. /etc/rc.status
fail_msg() {
rc_failed 1
rc_status -v
echo " ($1)"
}
succ_msg() {
rc_reset
rc_status -v
}
elif [ "$system" = "gentoo" ]; then
if [ -f /sbin/functions.sh ]; then
. /sbin/functions.sh
elif [ -f /etc/init.d/functions.sh ]; then
. /etc/init.d/functions.sh
fi
fail_msg() {
eerror "$1"
}
succ_msg() {
eend "$?"
}
begin_msg() {
ebegin "$1"
}
if [ "`which $0`" = "/sbin/rc" ]; then
shift
fi
else
fail_msg() {
echo " ...failed!"
echo " ($1)"
}
succ_msg() {
echo " ...done."
}
fi
if [ "$system" != "gentoo" ]; then
begin_msg() {
[ -z "${1:-}" ] && return 1
if [ -z "${2:-}" ]; then
echo -n "$1"
else
echo -n "$1: $2"
fi
}
fi
fi
failure()
{
fail_msg "$1"
exit 0
}
running()
{
lsmod | grep -q "$1[^_-]"
}
start()
{
begin_msg "Starting VirtualBox kernel modules"
if [ -d /proc/xen ]; then
failure "Running VirtualBox in a Xen environment is not supported"
fi
if ! running vboxdrv; then
if ! rm -f $DEVICE; then
failure "Cannot remove $DEVICE"
fi
if ! $MODPROBE vboxdrv > /dev/null 2>&1; then
failure "modprobe vboxdrv failed. Please use 'dmesg' to find out why"
fi
sleep .2
fi
# ensure the character special exists
if [ ! -c $DEVICE ]; then
MAJOR=`sed -n 's;\([0-9]\+\) vboxdrv;\1;p' /proc/devices`
if [ ! -z "$MAJOR" ]; then
MINOR=0
else
MINOR=`sed -n 's;\([0-9]\+\) vboxdrv;\1;p' /proc/misc`
if [ ! -z "$MINOR" ]; then
MAJOR=10
fi
fi
if [ -z "$MAJOR" ]; then
rmmod vboxdrv 2>/dev/null
failure "Cannot locate the VirtualBox device"
fi
if ! mknod -m 0660 $DEVICE c $MAJOR $MINOR 2>/dev/null; then
rmmod vboxdrv 2>/dev/null
failure "Cannot create device $DEVICE with major $MAJOR and minor $MINOR"
fi
fi
# ensure permissions
if ! chown :root $DEVICE 2>/dev/null; then
rmmod vboxpci 2>/dev/null
rmmod vboxnetadp 2>/dev/null
rmmod vboxnetflt 2>/dev/null
rmmod vboxdrv 2>/dev/null
failure "Cannot change group root for device $DEVICE"
fi
if ! $MODPROBE vboxnetflt > /dev/null 2>&1; then
failure "modprobe vboxnetflt failed. Please use 'dmesg' to find out why"
fi
if ! $MODPROBE vboxnetadp > /dev/null 2>&1; then
failure "modprobe vboxnetadp failed. Please use 'dmesg' to find out why"
fi
if ! $MODPROBE vboxpci > /dev/null 2>&1; then
failure "modprobe vboxpci failed. Please use 'dmesg' to find out why"
fi
# Create the /dev/vboxusb directory if the host supports that method
# of USB access. The USB code checks for the existance of that path.
if grep -q usb_device /proc/devices; then
mkdir -p -m 0750 /dev/vboxusb 2>/dev/null
chown root:vboxusers /dev/vboxusb 2>/dev/null
fi
succ_msg
}
stop()
{
begin_msg "Stopping VirtualBox kernel modules"
if running vboxpci; then
if ! rmmod vboxpci 2>/dev/null; then
failure "Cannot unload module vboxpci"
fi
fi
if running vboxnetadp; then
if ! rmmod vboxnetadp 2>/dev/null; then
failure "Cannot unload module vboxnetadp"
fi
fi
if running vboxdrv; then
if running vboxnetflt; then
if ! rmmod vboxnetflt 2>/dev/null; then
failure "Cannot unload module vboxnetflt"
fi
fi
if ! rmmod vboxdrv 2>/dev/null; then
failure "Cannot unload module vboxdrv"
fi
if ! rm -f $DEVICE; then
failure "Cannot unlink $DEVICE"
fi
fi
succ_msg
}
# enter the following variables in /etc/default/virtualbox:
# SHUTDOWN_USERS="foo bar"
# check for running VMs of user foo and user bar
# SHUTDOWN=poweroff
# SHUTDOWN=acpibutton
# SHUTDOWN=savestate
# select one of these shutdown methods for running VMs
stop_vms()
{
wait=0
for i in $SHUTDOWN_USERS; do
# don't create the ipcd directory with wrong permissions!
if [ -d /tmp/.vbox-$i-ipc ]; then
export VBOX_IPC_SOCKETID="$i"
VMS=`$VBOXMANAGE --nologo list runningvms | sed -e 's/^".*".*{\(.*\)}/\1/' 2>/dev/null`
if [ -n "$VMS" ]; then
if [ "$SHUTDOWN" = "poweroff" ]; then
begin_msg "Powering off remaining VMs"
for v in $VMS; do
$VBOXMANAGE --nologo controlvm $v poweroff
done
succ_msg
elif [ "$SHUTDOWN" = "acpibutton" ]; then
begin_msg "Sending ACPI power button event to remaining VMs"
for v in $VMS; do
$VBOXMANAGE --nologo controlvm $v acpipowerbutton
wait=30
done
succ_msg
elif [ "$SHUTDOWN" = "savestate" ]; then
begin_msg "Saving state of remaining VMs"
for v in $VMS; do
$VBOXMANAGE --nologo controlvm $v savestate
done
succ_msg
fi
fi
fi
done
# wait for some seconds when doing ACPI shutdown
if [ "$wait" -ne 0 ]; then
begin_msg "Waiting for $wait seconds for VM shutdown"
sleep $wait
succ_msg
fi
}
# setup_script
setup()
{
stop
begin_msg "Uninstalling old VirtualBox DKMS kernel modules"
$DODKMS uninstall vboxhost vboxdrv vboxnetflt vboxnetadp > $LOG
succ_msg
if find /lib/modules/`uname -r` -name "vboxpci\.*" 2>/dev/null|grep -q vboxpci; then
begin_msg "Removing old VirtualBox pci kernel module"
find /lib/modules/`uname -r` -name "vboxpci\.*" 2>/dev/null|xargs rm -f 2>/dev/null
succ_msg
fi
if find /lib/modules/`uname -r` -name "vboxnetadp\.*" 2>/dev/null|grep -q vboxnetadp; then
begin_msg "Removing old VirtualBox netadp kernel module"
find /lib/modules/`uname -r` -name "vboxnetadp\.*" 2>/dev/null|xargs rm -f 2>/dev/null
succ_msg
fi
if find /lib/modules/`uname -r` -name "vboxnetflt\.*" 2>/dev/null|grep -q vboxnetflt; then
begin_msg "Removing old VirtualBox netflt kernel module"
find /lib/modules/`uname -r` -name "vboxnetflt\.*" 2>/dev/null|xargs rm -f 2>/dev/null
succ_msg
fi
if find /lib/modules/`uname -r` -name "vboxdrv\.*" 2>/dev/null|grep -q vboxdrv; then
begin_msg "Removing old VirtualBox kernel module"
find /lib/modules/`uname -r` -name "vboxdrv\.*" 2>/dev/null|xargs rm -f 2>/dev/null
succ_msg
fi
begin_msg "Trying to register the VirtualBox kernel modules using DKMS"
if ! $DODKMS install vboxhost $VERSION >> $LOG; then
fail_msg "Failed, trying without DKMS"
begin_msg "Recompiling VirtualBox kernel modules"
if ! $BUILDINTMP \
--save-module-symvers /tmp/vboxdrv-Module.symvers \
--module-source "$MODULE_SRC/vboxdrv" \
--no-print-directory install >> $LOG 2>&1; then
failure "Look at $LOG to find out what went wrong"
fi
if ! $BUILDINTMP \
--use-module-symvers /tmp/vboxdrv-Module.symvers \
--module-source "$MODULE_SRC/vboxnetflt" \
--no-print-directory install >> $LOG 2>&1; then
failure "Look at $LOG to find out what went wrong"
fi
if ! $BUILDINTMP \
--use-module-symvers /tmp/vboxdrv-Module.symvers \
--module-source "$MODULE_SRC/vboxnetadp" \
--no-print-directory install >> $LOG 2>&1; then
failure "Look at $LOG to find out what went wrong"
fi
if ! $BUILDINTMP \
--use-module-symvers /tmp/vboxdrv-Module.symvers \
--module-source "$MODULE_SRC/vboxpci" \
--no-print-directory install >> $LOG 2>&1; then
failure "Look at $LOG to find out what went wrong"
fi
fi
rm -f /etc/vbox/module_not_compiled
succ_msg
start
}
dmnstatus()
{
if running vboxdrv; then
str="vboxdrv"
if running vboxnetflt; then
str="$str, vboxnetflt"
if running vboxnetadp; then
str="$str, vboxnetadp"
fi
fi
if running vboxpci; then
str="$str, vboxpci"
fi
echo "VirtualBox kernel modules ($str) are loaded."
for i in $SHUTDOWN_USERS; do
# don't create the ipcd directory with wrong permissions!
if [ -d /tmp/.vbox-$i-ipc ]; then
export VBOX_IPC_SOCKETID="$i"
VMS=`$VBOXMANAGE --nologo list runningvms | sed -e 's/^".*".*{\(.*\)}/\1/' 2>/dev/null`
if [ -n "$VMS" ]; then
echo "The following VMs are currently running:"
for v in $VMS; do
echo " $v"
done
fi
fi
done
else
echo "VirtualBox kernel module is not loaded."
fi
}
case "$1" in
start)
start
;;
stop)
stop_vms
stop
;;
stop_vms)
stop_vms
;;
restart)
stop && start
;;
force-reload)
stop
start
;;
setup)
setup
;;
status)
dmnstatus
;;
*)
echo "Usage: $0 {start|stop|stop_vms|restart|force-reload|status|setup}"
exit 1
esac
exit 0
što je to modprobe vboxdrv i kao ga napravim?
@PunkBastard
a što su to kernel headeri i kako ih instaliram?
BTW instaliram iz repozitorija ne mogu ga naći u meniju, a kad ga instaliram sa njihovih stranica mogu, ne znam da li je relevantno za moj slučaj$1
Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 18:59
Postao/la max360se
Instaliraj Kernel Headere prije nego instaliras vbox i napravi kako ti terminal kaze.
Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 19:01
Postao/la shicy
ajde u terminal i kucaj:
pa nakon toga
i trebalo bi raditi
Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 19:04
Postao/la max360se
Kernel headers su mu dependency
Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 20:58
Postao/la redundant
instalirao sam paket kernel-source, koliko sam skužio guglajući to bi trebao biti kernel header...ako to nije dovoljno, molim vas da mi kažete kako se zove dotični paket(i)!
Obavio sam ovo od Shicy-a u terminalu i dobio:
Kod: Označi sve
linux-yri7:/home/laput # /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules
Message from syslogd@linux-yri7 at Oct 23 21:46:07 ...
kernel:[ 1938.497610] RTSpinlockReleaseNoInts: ffff8800327168d0 (magic=0x19480428)
done
Uninstalling old VirtualBox DKMS kernel modules done
Trying to register the VirtualBox kernel modules using DKMS done
Starting VirtualBox kernel modules done
linux-yri7:/home/laput # modprobe vboxdrv
Još me treminal tražio da instaliram make pa sam i to napravio.
Virtualbox se i dalje odbija pokrenuti!
Re: VIRTUALBOX pokretanje
Postano: 23 lis 2012, 21:00
Postao/la max360se
daj ispis iz terminala kad pokrećeš