Regionalni Linux forum
https://www.linuxzasve.com/forum/
Stavljam ju u utor na laptopu na kojem piše "SD*MS/Pro*MMC*SM*XD", nemam poseban čitač.Suko je napisao/la:Jel ju stavljas u laptop? Ili imas poseban citac memorijskih kartica?
Kod: Označi sve
lspciKod: Označi sve
sudo fdisk -l
), pa ćeš se morati možda malo pomučiti da ga osposobiš, a možda nećeš ni uspjeti ako je neki skroz nepoznati čitač 
kava 
stevo@stevo-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
02:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller
02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
08:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
stevo@stevo-laptop:~$ sudo fdisk -l
[sudo] password for stevo:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00060cef
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9547 76684288 83 Linux
/dev/sda2 9548 9730 1464321 5 Extended
/dev/sda5 9548 9730 1464320 82 Linux swap / Solaris
stevo@stevo-laptop:~$
Čekam da se možda još netko uključi. Na drugom računalu sam morao mijenjati kernel kako bi mrežna kartica dobro radila, upute za to mi je davao Drade (ako se dobro sjećamsumski je napisao/la:Ak je to ovaj čitač , vele ljudi da radi sa 10.10 i više:
http://www.ubuntu.com/certification/cat ... :803C:104C
Možda probat sa novijim kernelom?
). Sam ga niti sad ne bih znao promijeniti.Najjednostavnije jest ali jednokratno, a niti nemam drugog digitalca. FinePix fotić mi je super i kanim još dosta slikati s njim pa bi idealno i trajno rješenje bilo da uspijem nekako osposobiti čitač na laptopu.4ndY je napisao/la:Najjednostavnije bi bilo da slike skineš kroz neki digitalac koji podržava xD, a na računalo se spaja preko USB-a...
Kod: Označi sve
dmesg