Stranica: 1/5.
Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 14:13
Postao/la Antipa
Pozdrav svima!
Nakon nekog vremena vratio sam se experimentiranju s linuxom.
Imam instalirani Mint 10 paralelno s XP. Nakon kratke upotrebe Mint preporučuje da se instalira drajver za grafičku karticu NIVIDA, inačica 96( s opaskom: testirali Mint-razvojni programeri), sam me vodi i radi to automatski nakon nekoliko klikova. Međutim, nakon toga, OS nikako da se podigne . Pojavi se crni ekran s nekim brojevima i piše nešto kao: 1250 to much work for irq9 ... nikako da se pokrene. Nakon klika enter, otvara rad u terminalu. Kad sam pokrenuo recovery mode i deinstalirao driver sve je OK. Ali grafika je osjetno slabija.
Ima li tko ideju gdje je greška? Što znači to much work for irq9 ? Kako napraviti da ostane drajver ali bez problema u bootanju. Inače, bez tog drajvera Gogle earth ne radi kako treba, a izgled i puno toga nije kako treba.
Hvala na pomoći.
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 14:22
Postao/la Grof
Očito se radi o vlasničkom driveru. Ne znam kako si ga pokušao instalirati, ali Mint, kao i Ubuntu ima svoj upravitelj za vlasničke drivere (Hardware drivers, u System - Administration). Ja bih na tvom mjestu otvorio taj upravitelj i pogledao kakve mi on drivere za grafičku pruža.
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 14:36
Postao/la Antipa
Tako je. radi se o vlasničkom drajveru. Kako sam ga instalirao? Jednostavno koristeći za to predviđen programčić u Mintu s nazivom "dodatni upravljački programi", sve ostalo je on napravio sam i odabir i instalaciju ja sam samo kliknuo DA.
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 14:49
Postao/la Grof
Odo u terminal i otipkaj:
pa daj tu stavi da vidimo i svakako pogledaj u tim Hardware driversima koju ti je točno verziju nvidija drivera instalirao!
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 15:14
Postao/la Antipa
ovo je rezultat nakon : lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation NV11GL [Quadro2 MXR/EX/Go] (rev a1).
Verzija drajvera je nividia 96.
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 15:26
Postao/la Grof
Driver bi trebao biti ok
http://www.nvidia.com/object/linux-disp ... river.html
pokušaj ga ponovo instalirati i kad ti javi on grešku, prebaci se u konzolu sa ALT-CTRL-F2, logiraj i napravi ovo:
Kod: Označi sve
sudo cp /var/log/Xorg.0.log /var/log/Xorg.nvidia.log
nakon toga, prebaci se u mod koji radi i ovu datoteku iz /var/log direktroija pošalji tu na forum da je malo razgledamo.
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 16:18
Postao/la Antipa
ponovo sam instalirao nividia drajver i problem s bootanjem je opet tu.
nakon predloženih koraka evo datoteka /var/log/Xorg.nvidia.log :
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 16:31
Postao/la DoDo
Kaj, prazna je?
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 16:40
Postao/la DoDo
Kaze ovako:
- Added support for X.Org xserver 1.9.
- Added support for X.Org xserver 1.8.
- Updated nvidia-installer to detect the nouveau kernel module and fail with an appropriate error message
Da se mozda ne pokolje sa noveau driverom pa tu stvar rikne?
Ajd probaj ovako: lijepo ti obrisi ovaj svoj driver preko onog installera i rebootaj u standardni mod koji ima graficko sucelje.
Zatim skini driver s gornjeg linka.
Zatim stisni ctrl+alt+f1 -> to ce te odvesti u konzolu.
Logiraj se u konzolu.
Ugasi graficko sucelje naredbom 'sudo init 3'.
Zatim se pozicioniraj u direktorij kamo si skinuo driver (to je .sh datoteka).
Dodaj execute prava na tu datoteku naredbom 'chmod +x imeDatoteke.sh'
Pokreni instalaciju drivera naredbom 'sudo ./imeDatoteke.sh'
Wizard bi te trebao voditi korak po korak u instalaciji drivera, a nakon sto instalacija uspjesno zavrsi restartaj racunalo naredbom 'sudo reboot'.
Nakon reboota bi trebao driver raditi, a ako ne radi onda je ocito rijec o nekom drugom problemu.
U tom slucaju trebas uninstalirati driver. To radis na sljedeci nacin: logiraj se na konzolu (no tamo vec budes ak ti grafika ne bu radila).
Odi u folder u kojem ti je onaj installer drivera (ona imeDatoteke.sh
).
Obrisi driver naredbom 'sudo ./imeDatoteke.sh --uninstall'.
Nakon zavrsetka lijepo rebootaj sa 'sudo reboot' i sve bi trebalo biti po starom.
Btw. ako ti ne bude radilo, prije nego obrises driver i vratis sve na staro spremi na sigurno datoteku /var/log/Xorg.0.log npr. naredbom 'cp /var/log/Xorg.0.log /home/tvojeime/Desktop'. Nakon povratka na staro na radnoj povrsini bi ti se trebala pojaviti tekstualna datoteka s opisom greske. Taj opis onda daj na forum pa da vidimo u cemu je problem.
Re: Mint 10: drajver za grafičku stvara problem s bootanjem
Postano: 26 sij 2011, 16:55
Postao/la Antipa
nije prazna. poslao sam je na privatnu adresu. čini mi se prevelika i ružna. mogla bi pokraviti ovako lijepu stranicu.
Kod: Označi sve
[ 69.622]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 69.622] X Protocol Version 11, Revision 0
[ 69.622] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[ 69.622] Current Operating System: Linux marinijum-MINT 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 i686
[ 69.622] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=e0087ae0-fa2e-4b00-897f-90deac6f4827 ro splash quiet vga=769 quiet splash
[ 69.623] Build Date: 09 January 2011 12:14:58PM
[ 69.623] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support)
[ 69.623] Current version of pixman: 0.18.4
[ 69.623] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.623] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 69.623] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 26 15:51:17 2011
[ 69.624] (==) Using config file: "/etc/X11/xorg.conf"
[ 69.624] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 69.625] (==) No Layout section. Using the first Screen section.
[ 69.625] (**) |-->Screen "Default Screen" (0)
[ 69.625] (**) | |-->Monitor "<default monitor>"
[ 69.626] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 69.626] (**) | |-->Device "Default Device"
[ 69.626] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 69.626] (==) Automatically adding devices
[ 69.626] (==) Automatically enabling devices
[ 69.650] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 69.650] Entry deleted from font path.
[ 69.675] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 69.675] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 69.675] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 69.675] (II) Loader magic: 0x81f9b00
[ 69.675] (II) Module ABI versions:
[ 69.675] X.Org ANSI C Emulation: 0.4
[ 69.675] X.Org Video Driver: 8.0
[ 69.675] X.Org XInput driver : 11.0
[ 69.675] X.Org Server Extension : 4.0
[ 69.677] (--) PCI:*(0:1:0:0) 10de:0113:10de:0059 rev 161, Mem @ 0xd6000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/65536
[ 69.677] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 69.677] (II) "extmod" will be loaded by default.
[ 69.677] (II) "dbe" will be loaded by default.
[ 69.677] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 69.677] (II) "record" will be loaded by default.
[ 69.677] (II) "dri" will be loaded by default.
[ 69.677] (II) "dri2" will be loaded by default.
[ 69.678] (II) LoadModule: "glx"
[ 69.678] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[ 69.830] (II) Module glx: vendor="NVIDIA Corporation"
[ 69.830] compiled for 4.0.2, module version = 1.0.0
[ 69.830] Module class: X.Org Server Extension
[ 69.830] (II) NVIDIA GLX Module 96.43.19 Wed Oct 27 19:20:11 PDT 2010
[ 69.830] (II) Loading extension GLX
[ 69.830] (II) LoadModule: "extmod"
[ 69.846] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 69.847] (II) Module extmod: vendor="X.Org Foundation"
[ 69.847] compiled for 1.9.0, module version = 1.0.0
[ 69.847] Module class: X.Org Server Extension
[ 69.847] ABI class: X.Org Server Extension, version 4.0
[ 69.847] (II) Loading extension MIT-SCREEN-SAVER
[ 69.847] (II) Loading extension XFree86-VidModeExtension
[ 69.847] (II) Loading extension XFree86-DGA
[ 69.847] (II) Loading extension DPMS
[ 69.847] (II) Loading extension XVideo
[ 69.847] (II) Loading extension XVideo-MotionCompensation
[ 69.847] (II) Loading extension X-Resource
[ 69.847] (II) LoadModule: "dbe"
[ 69.848] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 69.848] (II) Module dbe: vendor="X.Org Foundation"
[ 69.848] compiled for 1.9.0, module version = 1.0.0
[ 69.848] Module class: X.Org Server Extension
[ 69.848] ABI class: X.Org Server Extension, version 4.0
[ 69.848] (II) Loading extension DOUBLE-BUFFER
[ 69.848] (II) LoadModule: "record"
[ 69.849] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 69.849] (II) Module record: vendor="X.Org Foundation"
[ 69.849] compiled for 1.9.0, module version = 1.13.0
[ 69.849] Module class: X.Org Server Extension
[ 69.849] ABI class: X.Org Server Extension, version 4.0
[ 69.849] (II) Loading extension RECORD
[ 69.849] (II) LoadModule: "dri"
[ 69.850] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 69.850] (II) Module dri: vendor="X.Org Foundation"
[ 69.850] compiled for 1.9.0, module version = 1.0.0
[ 69.850] ABI class: X.Org Server Extension, version 4.0
[ 69.850] (II) Loading extension XFree86-DRI
[ 69.850] (II) LoadModule: "dri2"
[ 69.851] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 69.851] (II) Module dri2: vendor="X.Org Foundation"
[ 69.851] compiled for 1.9.0, module version = 1.2.0
[ 69.851] ABI class: X.Org Server Extension, version 4.0
[ 69.851] (II) Loading extension DRI2
[ 69.851] (II) LoadModule: "nvidia"
[ 69.851] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 69.856] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 69.857] compiled for 4.0.2, module version = 1.0.0
[ 69.857] Module class: X.Org Video Driver
[ 69.857] (II) NVIDIA dlloader X Driver 96.43.19 Wed Oct 27 19:07:40 PDT 2010
[ 69.857] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 69.857] (++) using VT number 7
[ 69.860] (II) Loading sub module "fb"
[ 69.860] (II) LoadModule: "fb"
[ 69.881] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 69.881] (II) Module fb: vendor="X.Org Foundation"
[ 69.881] compiled for 1.9.0, module version = 1.0.0
[ 69.881] ABI class: X.Org ANSI C Emulation, version 0.4
[ 69.881] (II) Loading sub module "ramdac"
[ 69.881] (II) LoadModule: "ramdac"
[ 69.882] (II) Module "ramdac" already built-in
[ 69.882] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 69.882] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 69.882] (==) NVIDIA(0): RGB weight 888
[ 69.882] (==) NVIDIA(0): Default visual is TrueColor
[ 69.882] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 69.882] (**) NVIDIA(0): Option "NoLogo" "True"
[ 69.882] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
[ 69.882] (**) NVIDIA(0): Enabling RENDER acceleration
[ 69.883] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 69.883] (II) NVIDIA(0): enabled.
[ 71.108] (II) NVIDIA(0): NVIDIA GPU Quadro2 MXR/EX/Go at PCI:1:0:0 (GPU-0)
[ 71.108] (--) NVIDIA(0): Memory: 32768 kBytes
[ 71.108] (--) NVIDIA(0): VideoBIOS: 03.11.01.37.25
[ 71.108] (II) NVIDIA(0): Detected AGP rate: 4X
[ 71.108] (--) NVIDIA(0): Interlaced video modes are not supported on this GPU
[ 71.108] (--) NVIDIA(0): Connected display device(s) on Quadro2 MXR/EX/Go at
[ 71.108] (--) NVIDIA(0): PCI:1:0:0:
[ 71.108] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
[ 71.108] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 350.0 MHz maximum pixel clock
[ 71.110] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 71.110] (WW) NVIDIA(0):
[ 71.110] (WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 71.110] (WW) NVIDIA(0): will be used as the requested mode.
[ 71.110] (WW) NVIDIA(0):
[ 71.110] (II) NVIDIA(0): Validated modes:
[ 71.110] (II) NVIDIA(0): "nvidia-auto-select"
[ 71.110] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 71.111] (--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
[ 71.111] (--) NVIDIA(0): option
[ 71.111] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
[ 71.111] (WW) NVIDIA(0): UBB.
[ 71.111] (--) Depth 24 pixmap format is 32 bpp
[ 71.125] (II) NVIDIA(0): Initialized GART.
[ 71.142] (EE) NVIDIA(0): Failed to allocate/map the primary surface!
[ 71.145]
Fatal server error:
[ 71.145] AddScreen/ScreenInit failed for driver 0
[ 71.145]
[ 71.145]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 71.145] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 71.145]
[ 71.156] ddxSigGiveUp: Closing log