[RIJEŠENO] Sweet Conky Gnome main

Novi ste u svijetu Linuxa? Imate hrpu početničkih pitanja?

Moderator/ica: Moderatori/ce

Pravila foruma
PRAVILA ZA NOVE KORISNIKE LINUXA!
Prije otvaranja bilo kakve diskusije svaki novi korisnik u svijetu Linuxa obavezan je učiniti sljedeće korake:
Pročitati ove tekstove iz naše Wikipedije:
- Sve uvodne tekstove Linuxa za početnike (njih 5)
- Sve što trebate znati o radu s diskovima
- Pročitati ovu temu za početnike
- Pokušati pronaći riješenje problema u Enciklopediji znanja

Nakon toga korisnik smije otvoriti temu s naslovom svog problema uz obaveznu naznaku Linux distribucije koju koristi u formi:
[Linux distribucija, broj verzije, grafičko okruženje]: Naslov problema
U prvom postu korisnik obavezno mora odgovoriti na ova pitanja:
- Da li ima instalirane Windowse?
- Što ga je motiviralo na instaliranje i korištenje Linux distribucije?
- Obavezno je potrebno navesti specifikacije hardvera (Ime Laptopa, tip procesora, grafičke i mrežne kartice, količina RAM-a i diska)

Bez učinjenih ovih prvih koraka, na teme se neće odgovarati i one će biti izbrisane s foruma!
Odgovori
Avatar
Cooleech
Moderator
Postovi: 6953
Pridružen/a: 13 stu 2010, 21:12
Spol: M
OS: Arch Linux KDE
Lokacija: /hrvatska/solin/

Re: Sweet Conky Gnome main

Post Postao/la Cooleech »

Tribanj je napisao/la: ↑08 sij 2025, 22:50 Svi widgeti daju približne rezultate za razliku od ove naredbe u Terminalu.

slika

slika

Ovo u Terminalu daje podatke o CPUTIN, a ne o CPU Temp.
Da, jedina temperatura koju prikazuje je pogrešna. A što ti sve vraća samo naredba sensors, bez grepanja?
Arch Linux Install Script (BIG update, BETA verzija)
Vl@do je napisao/la:Arch imaš upravo zato da uštediš na vremenu. Nemaš nikakvih problema s instalacijama, kompajliranjem i ostalim. Imaš jednostavno funkcionalan i stabilan, uvijek najsvježiji OS, a osim toga je sexy i cool do neba.
I've seen some idiots back in my time, but you man... you're special!
Vrh
Avatar
Tribanj
Postovi: 109
Pridružen/a: 25 kol 2024, 20:38
Spol: M
OS: Linux Mint 22.1 Cinnamon

Re: Sweet Conky Gnome main

Post Postao/la Tribanj »

Cooleech je napisao/la: ↑09 sij 2025, 06:38
Tribanj je napisao/la: ↑08 sij 2025, 22:50 Svi widgeti daju približne rezultate za razliku od ove naredbe u Terminalu.

slika

slika

Ovo u Terminalu daje podatke o CPUTIN, a ne o CPU Temp.
Da, jedina temperatura koju prikazuje je pogrešna. A što ti sve vraća samo naredba sensors, bez grepanja?
Vraća mi ovo:

Kod: Označi sve

mandak@mandak-desktop:~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +29.9°C  

drivetemp-scsi-2-0
Adapter: SCSI adapter
temp1:        +19.0°C  (low  =  +0.0°C, high = +60.0°C)
                       (crit low = -41.0°C, crit = +85.0°C)
                       (lowest = +18.0°C, highest = +19.0°C)

drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1:        +33.0°C  

amdgpu-pci-0500
Adapter: PCI adapter
vddgfx:        1.32 V  
vddnb:       993.00 mV 
edge:         +23.0°C  
PPT:           6.00 W  

nct6798-isa-0290
Adapter: ISA adapter
in0:                   560.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                     1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                     1.86 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                   1000.00 mV (min =  +0.00 V, max =  +0.00 V)
in6:                     1.34 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.44 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.82 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    2.05 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                    1.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.08 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  920.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                  912.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                   970 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
fan6:                     0 RPM  (min =    0 RPM)
fan7:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +22.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
CPUTIN:                 +23.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN0:                 +8.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN1:                -62.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN2:                +12.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN3:                +31.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +100.0°C)  sensor = thermistor
AUXTIN4:                +26.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)
SMBUSMASTER 0:          +29.0°C  (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
PCH_MCH_TEMP:            +0.0°C  
TSI0_TEMP:              +29.9°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

drivetemp-scsi-1-0
Adapter: SCSI adapter
temp1:        +22.0°C  (low  =  +0.0°C, high = +60.0°C)
                       (crit low = -41.0°C, crit = +85.0°C)
                       (lowest = +19.0°C, highest = +22.0°C)

mandak@mandak-desktop:~$
Linux Mint 22.1 "Xia" Cinnamon / Samsung Galaxy A55 5G

MB: ASRock B550M Pro4 / CPU: AMD Ryzen 5 PRO 4650G / GPU int. in CPU Radeon RX Vega 7 Renoir / RAM Memory: Corsair Vengeance LPX 16GB
Vrh
Avatar
Cooleech
Moderator
Postovi: 6953
Pridružen/a: 13 stu 2010, 21:12
Spol: M
OS: Arch Linux KDE
Lokacija: /hrvatska/solin/

Re: Sweet Conky Gnome main

Post Postao/la Cooleech »

Kod: Označi sve

mandak@mandak-desktop:~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +29.9°C  

drivetemp-scsi-2-0
Adapter: SCSI adapter
temp1:        +19.0°C  (low  =  +0.0°C, high = +60.0°C)
                       (crit low = -41.0°C, crit = +85.0°C)
                       (lowest = +18.0°C, highest = +19.0°C)

drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1:        +33.0°C  

amdgpu-pci-0500
Adapter: PCI adapter
vddgfx:        1.32 V  
vddnb:       993.00 mV 
edge:         +23.0°C  
PPT:           6.00 W  

nct6798-isa-0290
Adapter: ISA adapter
in0:                   560.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                     1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                     1.86 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                   1000.00 mV (min =  +0.00 V, max =  +0.00 V)
in6:                     1.34 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.44 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.82 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    2.05 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                    1.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.08 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  920.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                  912.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                   970 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
fan6:                     0 RPM  (min =    0 RPM)
fan7:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +22.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
CPUTIN:                 +23.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN0:                 +8.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN1:                -62.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN2:                +12.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN3:                +31.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +100.0°C)  sensor = thermistor
AUXTIN4:                +26.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)
SMBUSMASTER 0:          +29.0°C  (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
PCH_MCH_TEMP:            +0.0°C  
TSI0_TEMP:              +29.9°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

drivetemp-scsi-1-0
Adapter: SCSI adapter
temp1:        +22.0°C  (low  =  +0.0°C, high = +60.0°C)
                       (crit low = -41.0°C, crit = +85.0°C)
                       (lowest = +19.0°C, highest = +22.0°C)
Sudeći po ovome što vidim, sensors naredba ti uopće ne prikazuje temperaturu procesora. Najbolje ti je taj dio zakomentirati da ne pokazuje ništa.

Kod mene to izgleda ovako:

Kod: Označi sve

Arch Linux [Rolling Release]
(ɔ) 2025 Arch Linux. All rights reversed.

/home/cooleech> sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +34.0°C  (high = +86.0°C, crit = +92.0°C)
Core 0:        +32.0°C  (high = +86.0°C, crit = +92.0°C)
Core 1:        +30.0°C  (high = +86.0°C, crit = +92.0°C)
Core 2:        +33.0°C  (high = +86.0°C, crit = +92.0°C)
Core 3:        +32.0°C  (high = +86.0°C, crit = +92.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C  
temp2:        +29.8°C  

/home/cooleech>
Procesor:

Kod: Označi sve

/home/cooleech> lscpu
Architecture:             x86_64
  CPU op-mode(s):         32-bit, 64-bit
  Address sizes:          39 bits physical, 48 bits virtual
  Byte Order:             Little Endian
CPU(s):                   4
  On-line CPU(s) list:    0-3
Vendor ID:                GenuineIntel
  Model name:             Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz
  ...
Arch Linux Install Script (BIG update, BETA verzija)
Vl@do je napisao/la:Arch imaš upravo zato da uštediš na vremenu. Nemaš nikakvih problema s instalacijama, kompajliranjem i ostalim. Imaš jednostavno funkcionalan i stabilan, uvijek najsvježiji OS, a osim toga je sexy i cool do neba.
I've seen some idiots back in my time, but you man... you're special!
Vrh
Avatar
Tribanj
Postovi: 109
Pridružen/a: 25 kol 2024, 20:38
Spol: M
OS: Linux Mint 22.1 Cinnamon

Re: Sweet Conky Gnome main

Post Postao/la Tribanj »

Cooleech je napisao/la: ↑09 sij 2025, 08:29

Kod: Označi sve

mandak@mandak-desktop:~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +29.9°C  

drivetemp-scsi-2-0
Adapter: SCSI adapter
temp1:        +19.0°C  (low  =  +0.0°C, high = +60.0°C)
                       (crit low = -41.0°C, crit = +85.0°C)
                       (lowest = +18.0°C, highest = +19.0°C)

drivetemp-scsi-0-0
Adapter: SCSI adapter
temp1:        +33.0°C  

amdgpu-pci-0500
Adapter: PCI adapter
vddgfx:        1.32 V  
vddnb:       993.00 mV 
edge:         +23.0°C  
PPT:           6.00 W  

nct6798-isa-0290
Adapter: ISA adapter
in0:                   560.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                     1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                     1.86 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                   1000.00 mV (min =  +0.00 V, max =  +0.00 V)
in6:                     1.34 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.44 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.82 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    2.05 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                    1.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.08 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  920.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                  912.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                   970 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
fan6:                     0 RPM  (min =    0 RPM)
fan7:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +22.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
CPUTIN:                 +23.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN0:                 +8.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN1:                -62.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN2:                +12.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)  sensor = thermistor
AUXTIN3:                +31.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +100.0°C)  sensor = thermistor
AUXTIN4:                +26.0°C  (high = +80.0°C, hyst = +75.0°C)
                                 (crit = +80.0°C)
SMBUSMASTER 0:          +29.0°C  (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
PCH_MCH_TEMP:            +0.0°C  
TSI0_TEMP:              +29.9°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

drivetemp-scsi-1-0
Adapter: SCSI adapter
temp1:        +22.0°C  (low  =  +0.0°C, high = +60.0°C)
                       (crit low = -41.0°C, crit = +85.0°C)
                       (lowest = +19.0°C, highest = +22.0°C)
Sudeći po ovome što vidim, sensors naredba ti uopće ne prikazuje temperaturu procesora. Najbolje ti je taj dio zakomentirati da ne pokazuje ništa.

Kod mene to izgleda ovako:

Kod: Označi sve

Arch Linux [Rolling Release]
(ɔ) 2025 Arch Linux. All rights reversed.

/home/cooleech> sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +34.0°C  (high = +86.0°C, crit = +92.0°C)
Core 0:        +32.0°C  (high = +86.0°C, crit = +92.0°C)
Core 1:        +30.0°C  (high = +86.0°C, crit = +92.0°C)
Core 2:        +33.0°C  (high = +86.0°C, crit = +92.0°C)
Core 3:        +32.0°C  (high = +86.0°C, crit = +92.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C  
temp2:        +29.8°C  

/home/cooleech>
Procesor:

Kod: Označi sve

/home/cooleech> lscpu
Architecture:             x86_64
  CPU op-mode(s):         32-bit, 64-bit
  Address sizes:          39 bits physical, 48 bits virtual
  Byte Order:             Little Endian
CPU(s):                   4
  On-line CPU(s) list:    0-3
Vendor ID:                GenuineIntel
  Model name:             Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz
  ...
OK. Hvala.
Linux Mint 22.1 "Xia" Cinnamon / Samsung Galaxy A55 5G

MB: ASRock B550M Pro4 / CPU: AMD Ryzen 5 PRO 4650G / GPU int. in CPU Radeon RX Vega 7 Renoir / RAM Memory: Corsair Vengeance LPX 16GB
Vrh
Avatar
Tribanj
Postovi: 109
Pridružen/a: 25 kol 2024, 20:38
Spol: M
OS: Linux Mint 22.1 Cinnamon

Re: Sweet Conky Gnome main

Post Postao/la Tribanj »

Problem riješen. Ovo je pomoglo.

Kod: Označi sve

${goto 10}CPU Temp:${color6}${alignr 10}${hwmon 4 temp 1} °C
Linux Mint 22.1 "Xia" Cinnamon / Samsung Galaxy A55 5G

MB: ASRock B550M Pro4 / CPU: AMD Ryzen 5 PRO 4650G / GPU int. in CPU Radeon RX Vega 7 Renoir / RAM Memory: Corsair Vengeance LPX 16GB
Vrh
Odgovori

Natrag na “Linux početnici”