Ubuntu - dugi boot time, CPU usage i još ponešto

Novi ste u svijetu Linuxa? Imate hrpu početničkih pitanja?

Moderator/ica: Moderatori/ce

Pravila foruma
PRAVILA ZA NOVE KORISNIKE LINUXA!
Prije otvaranja bilo kakve diskusije svaki novi korisnik u svijetu Linuxa obavezan je učiniti sljedeće korake:
Pročitati ove tekstove iz naše Wikipedije:
- Sve uvodne tekstove Linuxa za početnike (njih 5)
- Sve što trebate znati o radu s diskovima
- Pročitati ovu temu za početnike
- Pokušati pronaći riješenje problema u Enciklopediji znanja

Nakon toga korisnik smije otvoriti temu s naslovom svog problema uz obaveznu naznaku Linux distribucije koju koristi u formi:
[Linux distribucija, broj verzije, grafičko okruženje]: Naslov problema
U prvom postu korisnik obavezno mora odgovoriti na ova pitanja:
- Da li ima instalirane Windowse?
- Što ga je motiviralo na instaliranje i korištenje Linux distribucije?
- Obavezno je potrebno navesti specifikacije hardvera (Ime Laptopa, tip procesora, grafičke i mrežne kartice, količina RAM-a i diska)

Bez učinjenih ovih prvih koraka, na teme se neće odgovarati i one će biti izbrisane s foruma!
Odgovori
Avatar
bertone
Site Admin
Postovi: 11557
Pridružen/a: 01 kol 2012, 12:39
Spol: M
OS: LMDE

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la bertone »

Sad kad je @NoMaam napisao o kojem se procesoru radi, onda su neke stvari jasnije.

Na žalost (korisnika) Intelov Pentium N3540 za laptope je proizvod koji je namijenjen za nisko zahtjevne uređaje, a radi se o arhitekturi koja svoje korijene vuče iz Atom procesora koji je trošio malo struje, ali nije blistao performansama...
Nadalje, navedeni procesor kako ima četiri jezgre na relativno viskom taktu od 2,1 GHz ima TDP od 7,5W (objasniti ću niže na primjeru WV dizel motora).

E sad, marketing i trgovci lijepo umotaju u celofan četiri jezgre i visoki radni takt, prešute TDP i obrade kupca koji je najčešće neupućen u hardver i koji sretan izlazi iz dućana i kasnije se čudi zašto je laptop spor.

SDI vs TDI.. WV je imao 1,9 dizel motor koji je u verziji SDI davao 64 KS, isti motor opremljen turbinom i još pokojom komponentom je bez problema išao i do 160 KS (TDI)... ako ste imali priliku voziti SDI i bilo koji TDI jasna vam je razlika u snazi i performansama u vožnji.

No vratimo se na CPU... malo sam bacio oko na net i tablica kaže ovako (usporedba Pentiuma N3540 vs i5 4300M kojeg imam u T540p i čiji boot time sam postao koju stranicu ranije):

Arhitektura:
slika

Performanse:
slika

Prevedeno, nije to loš CPU i zadovoljiti će većinu kućnih korisnika no ne treba očekivati čuda i zato (ponovno se ponavljam) ako je jedini problem malo duži boot time, a sve drugo radi OK... zanemari boot time i idemo na pivo/kavu ;)

Više o samom Pentium CPU-u koga zanima može pročitati ovdje.
[+ Prikaži] Klik
ThinkPad T14s Gen. 1
AMD Ryzen 7 PRO 4750U
16 GB DDR4-3200
Samsung SSD 970 EVO Plus 2TB
14" FHD IPS (Innolux N140HCG-GQ2)
WiFi Intel® Wi-Fi® 6 AX200
OS: LMDE 7
Slika: [url=https://i.postimg.cc/fs6gNqZt/Slika-zas ... -58-57.png[/url]

***

ZEN
"Charlie. What are you thinking?"
"I'm thinking about what I want and what I need."
"What do you want?"
"I want a peaceful soul."
"And what do you need?"
"I need a bigger gun."
robingalunicfarizi
Postovi: 52
Pridružen/a: 25 vel 2017, 11:05
Spol: M
OS: Linux Ubuntu 16.04 LTS

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la robingalunicfarizi »

@Abzeenth Evo ne mogu postati dmesg log, ako ga direktno zalijepim ovdje neda, ako stavim u privitak neda, neće i gotovo. Ali vidim da neke greške izbacuje, sve se meni čini da ovi glupavi serviseri nisu ni mijenjali disk :ljut2
@NoMaam Vjeruj mi, imam i ja, kad je krenio mrcvarit me u 12. mjesecu, nije prestao, sve mi se čini da će me mrcvarit dok ne crkne ili ga ja ne dokrajčim :hmm
@bertone Se meni čini da su me dobro zaj...jer sam htio uzet Acerov neki sa i5 procesorom i 256 giga SSD-om, pa mi ponudili kao ovaj, kao bolji, jači radni takt, dvije grafike, duže jamstvo, i sada patim zbog toga. pface Pa je, samo to je problem, ali barem se svaki puta upali, za razliku od sedmice, koja se smrzavala na resetu. A pivo? Jel živi netko na otoku krku od vas? :-D
Avatar
Vl@do
Moderator
Postovi: 6222
Pridružen/a: 28 lis 2011, 23:31
Spol: M
OS: Arch KDE Plazma
Lokacija: Zagreb
Kontakt:

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la Vl@do »

robingalunicfarizi je napisao/la:...ne mogu postati dmesg log, ako ga direktno zalijepim ovdje neda, ako stavim u privitak neda, neće i gotovo..
Logove stavljaš u "code tag" ovako:

Kod: Označi sve

neki_log
Na vrhu posta koji pišeš imaš traku: Bold, koso, podctrano, Quote, Code, List.......... E, taj code za codove. :kava
Moj pogled na sve to.
Glavna snaga GNU/Linuxa nije besplatnost, nego SLOBODA.
http://wiki.open.hr/wiki/Linux_CLI_naredbe
Avatar
bertone
Site Admin
Postovi: 11557
Pridružen/a: 01 kol 2012, 12:39
Spol: M
OS: LMDE

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la bertone »

U Ubuntuu imaš aplikaciju Disks, klik na nju i pogledaj si stanje diska pa ćeš usput vidjeti i koliko ima radnih sati i po tome da li su ga promijenili ili reparirali (zavaljali).
[+ Prikaži] Klik
ThinkPad T14s Gen. 1
AMD Ryzen 7 PRO 4750U
16 GB DDR4-3200
Samsung SSD 970 EVO Plus 2TB
14" FHD IPS (Innolux N140HCG-GQ2)
WiFi Intel® Wi-Fi® 6 AX200
OS: LMDE 7
Slika: [url=https://i.postimg.cc/fs6gNqZt/Slika-zas ... -58-57.png[/url]

***

ZEN
"Charlie. What are you thinking?"
"I'm thinking about what I want and what I need."
"What do you want?"
"I want a peaceful soul."
"And what do you need?"
"I need a bigger gun."
Avatar
vision
Postovi: 1799
Pridružen/a: 15 sij 2014, 09:37
Spol: ♂
OS: Leap 15.1 / Hera 5.1
Lokacija: Zaljev svetaca

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la vision »

Bilo bi dobro vidjeti kakvi snimak od trenutka paljenja laptopa do full desktopa.

Isto tako prilikom boot-a ako je splash screen (ljubičasta pozadina), pritisnuti tipku ↓ i vidjeti logove.

Ako je autologin uključen, za test bi ga valjalo isključiti i onda izmjeriti vrijeme do login screena i naknadno (nakon unosa passw) od pritiska Enter do full desktopa.

Za usporedbu na AMD Athlon M320 i WD Scorpio Blue 5400rpm Linux Mint 18.1 Cinnamon - boot time je ~60 - 75 sek, miš se pojavljuje na ~35 - 40 sek i onda slijedi čekanje... :hihi
robingalunicfarizi
Postovi: 52
Pridružen/a: 25 vel 2017, 11:05
Spol: M
OS: Linux Ubuntu 16.04 LTS

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la robingalunicfarizi »

Kod: Označi sve

robin@robin-HP-Pavilion-15-Notebook-PC:~$ dsmesg
Naredba 'dsmesg' nije pronađena, jeste li mislili:
 Naredba 'dmesg' iz paketa 'util-linux' (main)
dsmesg: naredba nije pronađena
robin@robin-HP-Pavilion-15-Notebook-PC:~$ dmesg
[    0.000000] Linux version 4.8.0-39-generic (buildd@lgw01-22) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #42~16.04.1-Ubuntu SMP Mon Feb 20 15:06:07 UTC 2017 (Ubuntu 4.8.0-39.42~16.04.1-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-39-generic.efi.signed root=UUID=332f8fed-642f-4c47-82e5-8f8a4d71814c ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x000000007585efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007585f000-0x000000007588afff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007588b000-0x000000007888afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007888b000-0x000000007891afff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007891b000-0x000000007919afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007919b000-0x00000000791b0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000791b1000-0x00000000791b1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000791b2000-0x000000007929afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007929b000-0x00000000792dafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000792db000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x792da014  ESRT=0x78a63118  SMBIOS=0x78a67000 
[    0.000000] esrt: Reserving ESRT space from 0x0000000078a63118 to 0x0000000078a63150.
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion 15 Notebook PC /233A, BIOS F.43 08/03/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07C000000 mask FFC000000 uncachable
[    0.000000]   3 base 07B000000 mask FFF000000 uncachable
[    0.000000]   4 base 07AE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask F80000000 write-back
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff974640024000] 24000 size 24576
[    0.000000] BRK [0x1d563c000, 0x1d563cfff] PGTABLE
[    0.000000] BRK [0x1d563d000, 0x1d563dfff] PGTABLE
[    0.000000] BRK [0x1d563e000, 0x1d563efff] PGTABLE
[    0.000000] BRK [0x1d563f000, 0x1d563ffff] PGTABLE
[    0.000000] BRK [0x1d5640000, 0x1d5640fff] PGTABLE
[    0.000000] BRK [0x1d5641000, 0x1d5641fff] PGTABLE
[    0.000000] BRK [0x1d5642000, 0x1d5642fff] PGTABLE
[    0.000000] BRK [0x1d5643000, 0x1d5643fff] PGTABLE
[    0.000000] BRK [0x1d5644000, 0x1d5644fff] PGTABLE
[    0.000000] BRK [0x1d5645000, 0x1d5645fff] PGTABLE
[    0.000000] BRK [0x1d5646000, 0x1d5646fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3338a000-0x359bcfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000792DA014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000792DA120 000094 (v01 HPQOEM SLIC-MPC 00000003      01000013)
[    0.000000] ACPI: FACP 0x00000000792D7000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: DSDT 0x00000000792C6000 00C475 (v02 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[    0.000000] ACPI: FACS 0x0000000079252000 000040
[    0.000000] ACPI: UEFI 0x00000000792D9000 000236 (v01 HPQOEM 233A     00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x00000000792D6000 000038 (v01 HPQOEM 233A     00000003 HP   00040000)
[    0.000000] ACPI: LPIT 0x00000000792D5000 000104 (v01 HPQOEM 233A     00000003 HP   00040000)
[    0.000000] ACPI: APIC 0x00000000792D4000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: MCFG 0x00000000792D3000 00003C (v01 HPQOEM 233A     00000003 HP   00040000)
[    0.000000] ACPI: SSDT 0x00000000792C5000 000763 (v01 HPQOEM 233A     00003000 INTL 00040000)
[    0.000000] ACPI: SSDT 0x00000000792C4000 000290 (v01 HPQOEM 233A     00003000 INTL 00040000)
[    0.000000] ACPI: SSDT 0x00000000792C3000 00017A (v01 HPQOEM 233A     00003000 INTL 00040000)
[    0.000000] ACPI: UEFI 0x00000000792C2000 000042 (v01 HPQOEM 233A     00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x00000000792BC000 005CFA (v01 HPQOEM 233A     00001000 INTL 00040000)
[    0.000000] ACPI: SSDT 0x00000000792B9000 002B2B (v01 HPQOEM 233A     00001000 INTL 00040000)
[    0.000000] ACPI: FPDT 0x00000000792B8000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.000000] ACPI: BGRT 0x00000000792B7000 000038 (v01 HPQOEM 233A     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27fff6000-0x27fffafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.000000]   node   0: [mem 0x0000000000070000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001effffff]
[    0.000000]   node   0: [mem 0x000000001f100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020100000-0x000000007585efff]
[    0.000000]   node   0: [mem 0x000000007588b000-0x000000007888afff]
[    0.000000]   node   0: [mem 0x00000000792db000-0x0000000079ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.000000] On node 0 totalpages: 2069258
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1135 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7695 pages used for memmap
[    0.000000]   DMA32 zone: 492420 pages, LIFO batch:31
[    0.000000]   Normal zone: 24576 pages used for memmap
[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7585f000-0x7588afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7888b000-0x7891afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7891b000-0x7919afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7919b000-0x791b0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x791b1000-0x791b1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x791b2000-0x7929afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7929b000-0x792dafff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a000000-0x7affffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7effffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f000000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9748bfc00000 s107864 r8192 d31400 u524288
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2035788
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-39-generic.efi.signed root=UUID=332f8fed-642f-4c47-82e5-8f8a4d71814c ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7966180K/8277032K available (8833K kernel code, 1441K rwdata, 3836K rodata, 1552K init, 1296K bss, 310852K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 2165.800 MHz processor
[    0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4331.60 BogoMIPS (lpj=8663200)
[    0.000035] pid_max: default: 32768 minimum: 301
[    0.000056] ACPI: Core revision 20160422
[    0.027228] ACPI: 6 ACPI AML tables successfully acquired and loaded

[    0.028152] Security Framework initialized
[    0.028155] Yama: becoming mindful.
[    0.028184] AppArmor: AppArmor initialized
[    0.028958] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.032430] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.034016] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034033] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034555] CPU: Physical Processor ID: 0
[    0.034558] CPU: Processor Core ID: 0
[    0.034563] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.034564] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.034572] mce: CPU supports 6 MCE banks
[    0.034586] process: using mwait in idle threads
[    0.034591] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.034592] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.034965] Freeing SMP alternatives memory: 32K (ffffffff822ee000 - ffffffff822f6000)
[    0.040885] ftrace: allocating 33460 entries in 131 pages
[    0.063609] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.063611] smpboot: Max logical packages: 1
[    0.064590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.104296] TSC deadline timer enabled
[    0.104300] smpboot: CPU0: Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.104306] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.104331] ... version:                3
[    0.104333] ... bit width:              40
[    0.104334] ... generic registers:      2
[    0.104335] ... value mask:             000000ffffffffff
[    0.104336] ... max period:             0000007fffffffff
[    0.104337] ... fixed-purpose events:   3
[    0.104338] ... event mask:             0000000700000003
[    0.105875] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.106117] x86: Booting SMP configuration:
[    0.106119] .... node  #0, CPUs:      #1 #2 #3
[    0.113216] x86: Booted up 1 node, 4 CPUs
[    0.113219] smpboot: Total of 4 processors activated (17326.40 BogoMIPS)
[    0.115107] devtmpfs: initialized
[    0.115232] x86/mm: Memory block size: 128MB
[    0.123029] evm: security.selinux
[    0.123030] evm: security.SMACK64
[    0.123031] evm: security.SMACK64EXEC
[    0.123032] evm: security.SMACK64TRANSMUTE
[    0.123033] evm: security.SMACK64MMAP
[    0.123033] evm: security.ima
[    0.123034] evm: security.capability
[    0.123142] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[    0.123145] PM: Registering ACPI NVS region [mem 0x7919b000-0x791b0fff] (90112 bytes)
[    0.123148] PM: Registering ACPI NVS region [mem 0x791b2000-0x7929afff] (954368 bytes)
[    0.123293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.123370] pinctrl core: initialized pinctrl subsystem
[    0.123567] RTC time: 22:06:37, date: 02/28/17
[    0.123765] NET: Registered protocol family 16
[    0.137161] cpuidle: using governor ladder
[    0.153175] cpuidle: using governor menu
[    0.153177] PCCT header not found.
[    0.153240] ACPI: bus type PCI registered
[    0.153243] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153369] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.153372] PCI: not using MMCONFIG
[    0.153374] PCI: Using configuration type 1 for base access
[    0.169460] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.169982] ACPI: Added _OSI(Module Device)
[    0.169984] ACPI: Added _OSI(Processor Device)
[    0.169985] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.169987] ACPI: Added _OSI(Processor Aggregator Device)
[    0.182276] ACPI: Dynamic OEM Table Load:
[    0.182289] ACPI: SSDT 0xFFFF9748B5D0E800 000440 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.183411] ACPI: Dynamic OEM Table Load:
[    0.183421] ACPI: SSDT 0xFFFF9748B5D0B000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.184956] ACPI: Dynamic OEM Table Load:
[    0.184965] ACPI: SSDT 0xFFFF9748B5D3E800 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.186064] ACPI: Dynamic OEM Table Load:
[    0.186072] ACPI: SSDT 0xFFFF9748B70A50C0 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.188915] ACPI : EC: EC started
[    9.132901] ACPI: Interpreter enabled
[    9.132941] ACPI: (supports S0 S3 S4 S5)
[    9.132943] ACPI: Using IOAPIC for interrupt routing
[    9.133008] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    9.134649] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    9.134664] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    9.141430] ACPI: Power Resource [USBC] (on)
[    9.141763] ACPI: Power Resource [PC01] (on)
[    9.146495] ACPI: Power Resource [PLPE] (on)
[    9.146859] ACPI: Power Resource [PLPE] (on)
[    9.152229] ACPI: Power Resource [CLK0] (on)
[    9.152311] ACPI: Power Resource [CLK1] (on)
[    9.233472] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    9.233481] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    9.233562] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    9.233583] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    9.233831] acpi PNP0A08:00: host bridge window expanded to [mem 0x80000000-0xc38ffffe window]; [mem 0x80000000-0xc38ffffe window] ignored
[    9.234176] PCI host bridge to bus 0000:00
[    9.234180] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    9.234183] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    9.234185] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    9.234188] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    9.234190] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    9.234192] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    9.234195] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    9.234197] pci_bus 0000:00: root bus resource [mem 0x80000000-0xc38ffffe window]
[    9.234200] pci_bus 0000:00: root bus resource [bus 00-ff]
[    9.234211] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    9.234390] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    9.234403] pci 0000:00:02.0: reg 0x10: [mem 0xc3000000-0xc33fffff]
[    9.234414] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff pref]
[    9.234425] pci 0000:00:02.0: reg 0x20: [io  0x3050-0x3057]
[    9.234652] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[    9.234670] pci 0000:00:13.0: reg 0x10: [io  0x3048-0x304f]
[    9.234680] pci 0000:00:13.0: reg 0x14: [io  0x305c-0x305f]
[    9.234689] pci 0000:00:13.0: reg 0x18: [io  0x3040-0x3047]
[    9.234698] pci 0000:00:13.0: reg 0x1c: [io  0x3058-0x305b]
[    9.234707] pci 0000:00:13.0: reg 0x20: [io  0x3020-0x303f]
[    9.234717] pci 0000:00:13.0: reg 0x24: [mem 0xc3817000-0xc38177ff]
[    9.234765] pci 0000:00:13.0: PME# supported from D3hot
[    9.234942] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    9.234961] pci 0000:00:14.0: reg 0x10: [mem 0xc3800000-0xc380ffff 64bit]
[    9.235022] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    9.235127] pci 0000:00:14.0: System wakeup disabled by ACPI
[    9.235215] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    9.235239] pci 0000:00:1a.0: reg 0x10: [mem 0xc3700000-0xc37fffff]
[    9.235253] pci 0000:00:1a.0: reg 0x14: [mem 0xc3600000-0xc36fffff]
[    9.235357] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    9.235504] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    9.235526] pci 0000:00:1b.0: reg 0x10: [mem 0xc3810000-0xc3813fff 64bit]
[    9.235599] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    9.235741] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    9.235805] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    9.235917] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    9.235997] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[    9.236435] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    9.236514] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    9.236586] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    9.236649] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    9.236730] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    9.236807] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    9.237035] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    9.237069] pci 0000:00:1f.3: reg 0x10: [mem 0xc3814000-0xc381401f]
[    9.237140] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
[    9.237454] pci 0000:01:00.0: [10de:1340] type 00 class 0x030200
[    9.237472] pci 0000:01:00.0: reg 0x10: [mem 0xc2000000-0xc2ffffff]
[    9.237488] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    9.237503] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    9.237514] pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
[    9.237525] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    9.237694] pci 0000:01:00.0: System wakeup disabled by ACPI
[    9.248948] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    9.248953] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    9.248957] pci 0000:00:1c.0:   bridge window [mem 0xc2000000-0xc2ffffff]
[    9.248963] pci 0000:00:1c.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    9.249063] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    9.249084] pci 0000:02:00.0: reg 0x10: [io  0x1000-0x10ff]
[    9.249112] pci 0000:02:00.0: reg 0x18: [mem 0xc3404000-0xc3404fff 64bit pref]
[    9.249131] pci 0000:02:00.0: reg 0x20: [mem 0xc3400000-0xc3403fff 64bit pref]
[    9.249143] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    9.249229] pci 0000:02:00.0: supports D1 D2
[    9.249231] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    9.249314] pci 0000:02:00.0: System wakeup disabled by ACPI
[    9.260957] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    9.260961] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    9.260968] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[    9.261091] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[    9.261121] pci 0000:03:00.0: reg 0x10: [mem 0xc3501000-0xc3501fff]
[    9.261277] pci 0000:03:00.0: supports D1 D2
[    9.261279] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[    9.272993] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    9.272999] pci 0000:00:1c.3:   bridge window [mem 0xc3500000-0xc35fffff]
[    9.274242] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    9.274369] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    9.274496] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    9.274622] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    9.274747] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    9.274872] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    9.274998] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    9.275123] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    9.277045] ACPI: Enabled 8 GPEs in block 00 to 3F
[    9.277293] ACPI : EC: EC stopped
[    9.277377] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    9.277379] ACPI : EC: EC started
[   12.008729] SCSI subsystem initialized
[   12.008820] libata version 3.00 loaded.
[   12.008921] vgaarb: setting as boot device: PCI:0000:00:02.0
[   12.008924] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[   12.008930] vgaarb: loaded
[   12.008931] vgaarb: bridge control possible 0000:00:02.0
[   12.009016] ACPI: bus type USB registered
[   12.009068] usbcore: registered new interface driver usbfs
[   12.009096] usbcore: registered new interface driver hub
[   12.009139] usbcore: registered new device driver usb
[   12.022388] PCI: Using ACPI for IRQ routing
[   12.023785] PCI: pci_cache_line_size set to 64 bytes
[   12.023869] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[   12.023871] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[   12.023873] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[   12.023874] e820: reserve RAM buffer [mem 0x7585f000-0x77ffffff]
[   12.023876] e820: reserve RAM buffer [mem 0x7888b000-0x7bffffff]
[   12.023878] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[   12.024085] NetLabel: Initializing
[   12.024086] NetLabel:  domain hash size = 128
[   12.024087] NetLabel:  protocols = UNLABELED CIPSOv4
[   12.024109] NetLabel:  unlabeled traffic allowed by default
[   12.024330] clocksource: Switched to clocksource refined-jiffies
[   12.038803] VFS: Disk quotas dquot_6.6.0
[   12.038846] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   12.039021] AppArmor: AppArmor Filesystem Enabled
[   12.039129] pnp: PnP ACPI init
[   12.039245] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[   12.039872] system 00:01: [io  0x0680-0x069f] has been reserved
[   12.039876] system 00:01: [io  0x0400-0x047f] has been reserved
[   12.039879] system 00:01: [io  0x0500-0x05fe] has been reserved
[   12.039881] system 00:01: [io  0x0600-0x061f] has been reserved
[   12.039886] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[   12.039893] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[   12.040001] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[   12.040070] pnp 00:03: Plug and Play ACPI device, IDs SYN1ec0 SYN1e00 SYN0002 PNP0f13 (active)
[   12.040789] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
[   12.040792] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
[   12.040799] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
[   12.040802] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
[   12.040805] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved
[   12.040808] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[   12.040810] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
[   12.040813] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[   12.040816] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved
[   12.040821] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[   12.042551] pnp: PnP ACPI: found 5 devices
[   12.050975] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[   12.051001] clocksource: Switched to clocksource acpi_pm
[   12.051013] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[   12.051018] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[   12.051059] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80000000-0x800fffff]
[   12.051066] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[   12.051069] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[   12.051072] pci 0000:00:1c.0: PCI bridge to [bus 01]
[   12.051075] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[   12.051081] pci 0000:00:1c.0:   bridge window [mem 0xc2000000-0xc2ffffff]
[   12.051085] pci 0000:00:1c.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[   12.051092] pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref]
[   12.051095] pci 0000:00:1c.2: PCI bridge to [bus 02]
[   12.051098] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[   12.051103] pci 0000:00:1c.2:   bridge window [mem 0x80000000-0x800fffff]
[   12.051107] pci 0000:00:1c.2:   bridge window [mem 0xc3400000-0xc34fffff 64bit pref]
[   12.051112] pci 0000:00:1c.3: PCI bridge to [bus 03]
[   12.051117] pci 0000:00:1c.3:   bridge window [mem 0xc3500000-0xc35fffff]
[   12.051125] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[   12.051128] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[   12.051130] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[   12.051132] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[   12.051135] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[   12.051137] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[   12.051139] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[   12.051142] pci_bus 0000:00: resource 11 [mem 0x80000000-0xc38ffffe window]
[   12.051145] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[   12.051147] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc2ffffff]
[   12.051149] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[   12.051152] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[   12.051154] pci_bus 0000:02: resource 1 [mem 0x80000000-0x800fffff]
[   12.051157] pci_bus 0000:02: resource 2 [mem 0xc3400000-0xc34fffff 64bit pref]
[   12.051159] pci_bus 0000:03: resource 1 [mem 0xc3500000-0xc35fffff]
[   12.051227] NET: Registered protocol family 2
[   12.051538] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[   12.051786] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   12.052099] TCP: Hash tables configured (established 65536 bind 65536)
[   12.052186] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[   12.052252] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[   12.052407] NET: Registered protocol family 1
[   12.052437] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[   12.052826] PCI: CLS 64 bytes, default 64
[   12.052940] Trying to unpack rootfs image as initramfs...
[   12.342128] random: fast init done
[   13.046730] Freeing initrd memory: 39116K (ffff97467338a000 - ffff9746759bd000)
[   13.046737] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   13.046740] software IO TLB [mem 0x7185f000-0x7585f000] (64MB) mapped at [ffff9746b185f000-ffff9746b585efff]
[   13.046973] Scanning for low memory corruption every 60 seconds
[   13.047808] futex hash table entries: 1024 (order: 4, 65536 bytes)
[   13.047850] audit: initializing netlink subsys (disabled)
[   13.047876] audit: type=2000 audit(1488319610.027:1): initialized
[   13.048410] Initialise system trusted keyrings
[   13.048635] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[   13.052021] zbud: loaded
[   13.052855] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   13.053318] fuse init (API version 7.25)
[   13.053606] Allocating IMA blacklist keyring.
[   13.057003] Key type asymmetric registered
[   13.057006] Asymmetric key parser 'x509' registered
[   13.057107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[   13.057196] io scheduler noop registered
[   13.057198] io scheduler deadline registered (default)
[   13.057213] io scheduler cfq registered
[   13.057914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.057924] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   13.057990] efifb: probing for efifb
[   13.058013] efifb: framebuffer at 0xa0000000, using 4160k, total 4160k
[   13.058015] efifb: mode is 1366x768x32, linelength=5504, pages=1
[   13.058015] efifb: scrolling: redraw
[   13.058018] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   13.058216] Console: switching to colour frame buffer device 170x48
[   13.058248] fb0: EFI VGA frame buffer device
[   13.058262] intel_idle: MWAIT substates: 0x33000020
[   13.058264] intel_idle: v0.4.1 model 0x37
[   13.058569] intel_idle: lapic_timer_reliable_states 0xffffffff
[   13.059555] ACPI: AC Adapter [ACAD] (off-line)
[   13.059722] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[   13.060080] ACPI: Lid Switch [LID0]
[   13.060159] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   13.060163] ACPI: Power Button [PWRB]
[   13.060257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   13.060260] ACPI: Power Button [PWRF]
[   13.086008] thermal LNXTHERM:00: registered as thermal_zone0
[   13.086012] ACPI: Thermal Zone [TZ01] (40 C)
[   13.086119] GHES: HEST is not enabled!
[   13.086760] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[   13.107141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   13.153876] ACPI: Battery Slot [BAT0] (battery present)
[   13.154421] hpet: number irqs doesn't agree with number of timers
[   13.154810] Linux agpgart interface v0.103
[   13.164868] brd: module loaded
[   13.172499] loop: module loaded
[   13.172884] libphy: Fixed MDIO Bus: probed
[   13.172885] tun: Universal TUN/TAP device driver, 1.6
[   13.172886] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   13.173191] PPP generic driver version 2.4.2
[   13.173383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.173389] ehci-pci: EHCI PCI platform driver
[   13.173414] ehci-platform: EHCI generic platform driver
[   13.173435] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.173440] ohci-pci: OHCI PCI platform driver
[   13.173457] ohci-platform: OHCI generic platform driver
[   13.173474] uhci_hcd: USB Universal Host Controller Interface driver
[   13.173741] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   13.173751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[   13.174873] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[   13.174879] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[   13.175036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   13.175039] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.175041] usb usb1: Product: xHCI Host Controller
[   13.175043] usb usb1: Manufacturer: Linux 4.8.0-39-generic xhci-hcd
[   13.175045] usb usb1: SerialNumber: 0000:00:14.0
[   13.175654] hub 1-0:1.0: USB hub found
[   13.175683] hub 1-0:1.0: 6 ports detected
[   13.177112] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   13.177118] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[   13.177188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   13.177191] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.177193] usb usb2: Product: xHCI Host Controller
[   13.177195] usb usb2: Manufacturer: Linux 4.8.0-39-generic xhci-hcd
[   13.177197] usb usb2: SerialNumber: 0000:00:14.0
[   13.177478] hub 2-0:1.0: USB hub found
[   13.177491] hub 2-0:1.0: 1 port detected
[   13.177796] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   13.184299] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.184307] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.184680] mousedev: PS/2 mouse device common for all mice
[   13.185294] rtc_cmos 00:00: RTC can wake from S4
[   13.185526] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[   13.185552] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[   13.185565] i2c /dev entries driver
[   13.185673] device-mapper: uevent: version 1.0.3
[   13.185869] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[   13.185876] intel_pstate: Intel P-state driver initializing
[   13.186821] ledtrig-cpu: registered to indicate activity on CPUs
[   13.186826] EFI Variables Facility v0.08 2004-May-17
[   13.206003] NET: Registered protocol family 10
[   13.207135] NET: Registered protocol family 17
[   13.207150] Key type dns_resolver registered
[   13.207620] microcode: sig=0x30678, pf=0x8, revision=0x815
[   13.208123] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.209267] registered taskstats version 1
[   13.209273] Loading compiled-in X.509 certificates
[   13.215990] Loaded X.509 cert 'Build time autogenerated kernel key: b676cc7c62663677ffcdd31b57807ddf29735766'
[   13.216044] zswap: loaded using pool lzo/zbud
[   13.225433] Key type big_key registered
[   13.229973] Key type trusted registered
[   13.235129] Key type encrypted registered
[   13.235135] AppArmor: AppArmor sha1 policy hashing enabled
[   13.235137] ima: No TPM chip found, activating TPM-bypass!
[   13.235179] evm: HMAC attrs: 0x1
[   13.236676]   Magic number: 5:479:149
[   13.236701] bdi 1:1: hash matches
[   13.237419] rtc_cmos 00:00: setting system clock to 2017-02-28 22:06:50 UTC (1488319610)
[   13.237845] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   13.237846] EDD information not available.
[   13.237955] PM: Hibernation image not present or could not be loaded.
[   13.240789] Freeing unused kernel memory: 1552K (ffffffff8216a000 - ffffffff822ee000)
[   13.240792] Write protecting the kernel read-only data: 14336k
[   13.242386] Freeing unused kernel memory: 1392K (ffff974814ca4000 - ffff974814e00000)
[   13.243424] Freeing unused kernel memory: 260K (ffff9748151bf000 - ffff974815200000)
[   13.257781] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   13.268578] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   13.362263] hidraw: raw HID events driver (C) Jiri Kosina
[   13.368083] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[   13.384820] wmi: Mapper loaded
[   13.390156] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   13.390169] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   13.390794] r8169 0000:02:00.0 eth0: RTL8106e at 0xffffac0b40e9a000, 8c:dc:d4:89:81:91, XID 04900000 IRQ 88
[   13.394370] [drm] Initialized drm 1.1.0 20060810
[   13.397198] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 89
[   13.410809] ahci 0000:00:13.0: version 3.0
[   13.411000] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[   13.423685] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[   13.423689] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
[   13.427695] scsi host0: ahci
[   13.427895] scsi host1: ahci
[   13.427981] ata1: SATA max UDMA/133 abar m2048@0xc3817000 port 0xc3817100 irq 90
[   13.427983] ata2: SATA max UDMA/133 abar m2048@0xc3817000 port 0xc3817180 irq 90
[   13.456000] [drm] Memory usable by graphics device = 2048M
[   13.456004] checking generic (a0000000 410000) vs hw (a0000000 10000000)
[   13.456006] fb: switching to inteldrmfb from EFI VGA
[   13.456051] Console: switching to colour dummy device 80x25
[   13.456189] [drm] Replacing VGA console driver
[   13.456304] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.456305] [drm] Driver supports precise vblank timestamp query.
[   13.458259] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[   13.458405] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[   13.458645] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[   13.458706] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[   13.458806] ACPI Warning: \_SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[   13.459030] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[   13.459035] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP01.PXSX handle
[   13.459035] nouveau: detected PR support, will not use DSM
[   13.459309] nouveau 0000:01:00.0: NVIDIA GM108 (118000a2)
[   13.459785] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.476391] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   13.488050] nouveau 0000:01:00.0: bios: version 82.08.19.00.0f
[   13.574002] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[   13.574837] nouveau 0000:01:00.0: priv: HUB0: 6013d4 00005700 (19408200)
[   13.574899] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[   13.574971] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)
[   13.742050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   13.742115] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   13.744085] ata1.00: ATA-9: HGST HTS545050A7E680, GR2OA3J0, max UDMA/133
[   13.744089] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   13.746031] ata1.00: configured for UDMA/133
[   13.746628] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545050A7 A3J0 PQ: 0 ANSI: 5
[   13.746804] ata2.00: ATAPI: hp       DVDRW  SU208GB, HH00, max UDMA/100
[   13.752656] ata2.00: configured for UDMA/100
[   13.788204] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[   13.788207] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   13.788334] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.788450] sd 0:0:0:0: [sda] Write Protect is off
[   13.788453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.788606] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.790740] scsi 1:0:0:0: CD-ROM            hp       DVDRW  SU208GB   HH00 PQ: 0 ANSI: 5
[   13.811359] usb 1-1: New USB device found, idVendor=0bda, idProduct=5401
[   13.811362] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.811365] usb 1-1: Product: USB3.0 Hub
[   13.811366] usb 1-1: Manufacturer: Realtek
[   13.811899] hub 1-1:1.0: USB hub found
[   13.813327] hub 1-1:1.0: 4 ports detected
[   13.813330] usb 1-1: selecting invalid altsetting 1
[   13.813332] hub 1-1:1.0: Using single TT (err -22)
[   13.813557] usb: port power management may be unreliable
[   13.826169] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   13.826172] cdrom: Uniform CD-ROM driver Revision: 3.20
[   13.826712] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   13.826897] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   13.830784]  sda: sda1 sda2 sda3
[   13.831852] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.920671] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[   13.955233] usb 2-1: New USB device found, idVendor=0bda, idProduct=0401
[   13.955235] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.955237] usb 2-1: Product: USB3.0 Hub
[   13.955239] usb 2-1: Manufacturer: Realtek
[   13.964502] hub 2-1:1.0: USB hub found
[   13.966356] hub 2-1:1.0: 4 ports detected
[   14.064013] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[   14.071860] tsc: Refined TSC clocksource calibration: 2166.662 MHz
[   14.071871] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f3b2da38f1, max_idle_ns: 440795221718 ns
[   14.204823] usb 1-2: New USB device found, idVendor=2001, idProduct=3311
[   14.204826] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   14.204828] usb 1-2: Product: GO-USB-N150 N Adapter
[   14.204830] usb 1-2: Manufacturer: Realtek
[   14.204831] usb 1-2: SerialNumber: 7062B8B469B5
[   14.262713] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4712]
[   14.303781] psmouse serio1: synaptics: queried min coordinates: x [1326..], y [1200..]
[   14.324099] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[   14.381507] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800/0x0, board id: 2997, fw id: 1665536
[   14.433790] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[   14.475166] usb 1-4: New USB device found, idVendor=04f2, idProduct=b45e
[   14.475169] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   14.475171] usb 1-4: Product: HP Truevision HD
[   14.475173] usb 1-4: Manufacturer: SunplusIT Inc
[   14.856513] vga_switcheroo: enabled
[   14.856921] [TTM] Zone  kernel: Available graphics memory: 4031738 kiB
[   14.856923] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   14.856924] [TTM] Initializing pool allocator
[   14.856931] [TTM] Initializing DMA pool allocator
[   14.856957] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[   14.856959] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   14.856964] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[   14.856966] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   14.856969] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[   15.098839] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[   15.098853] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[   15.099556] clocksource: Switched to clocksource tsc
[   15.101512] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[   15.101532] ACPI: Video Device [PXSX] (multi-head: yes  rom: yes  post: no)
[   15.101784] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1e/LNXVIDEO:00/input/input6
[   15.102840] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.103005] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[   15.103185] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[   15.291183] fbcon: inteldrmfb (fb0) is primary device
[   15.291295] Console: switching to colour frame buffer device 170x48
[   15.291325] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.655588] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   16.499211] random: crng init done
[   16.894082] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   16.894351] systemd[1]: Detected architecture x86-64.
[   16.911758] systemd[1]: Set hostname to <robin-HP-Pavilion-15-Notebook-PC>.
[   18.048933] systemd[1]: Created slice System Slice.
[   18.049140] systemd[1]: Listening on Journal Audit Socket.
[   18.049212] systemd[1]: Listening on Journal Socket (/dev/log).
[   18.049263] systemd[1]: Listening on Syslog Socket.
[   18.049342] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   18.049596] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   18.049738] systemd[1]: Created slice User and Session Slice.
[   18.995292] lp: driver loaded but no devices found
[   19.093736] ppdev: user-space parallel port driver
[   19.609328] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.707634] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   19.927441] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.986763] nouveau 0000:01:00.0: DRM: evicting buffers...
[   20.986767] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   20.986790] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   20.990348] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   21.018127] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   21.736780] systemd-journald[263]: Received request to flush runtime journal from PID 1
[   22.087971] Initializing HPQ6001 module
[   22.088073] input: HP Wireless hotkeys as /devices/virtual/input/input8
[   22.147871] hp_accel: laptop model unknown, using default axes configuration
[   22.162184] lis3lv02d: 8 bits 3DC sensor found
[   22.203160] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[   22.225778] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.797308] Bluetooth: Core ver 2.21
[   22.797328] NET: Registered protocol family 31
[   22.797330] Bluetooth: HCI device and connection manager initialized
[   22.797334] Bluetooth: HCI socket layer initialized
[   22.797338] Bluetooth: L2CAP socket layer initialized
[   22.797347] Bluetooth: SCO socket layer initialized
[   23.349539] media: Linux media interface: v0.10
[   23.518642] Bluetooth: HCI UART driver ver 2.3
[   23.518645] Bluetooth: HCI UART protocol H4 registered
[   23.518646] Bluetooth: HCI UART protocol BCSP registered
[   23.518647] Bluetooth: HCI UART protocol LL registered
[   23.518648] Bluetooth: HCI UART protocol ATH3K registered
[   23.518649] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   23.518702] Bluetooth: HCI UART protocol Intel registered
[   23.518724] Bluetooth: HCI UART protocol BCM registered
[   23.518725] Bluetooth: HCI UART protocol QCA registered
[   23.518726] Bluetooth: HCI UART protocol AG6XX registered
[   23.519607] Linux video capture interface: v2.00
[   23.716657] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   23.866966] kvm: disabled by bios
[   24.115306] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b45e)
[   24.115684] intel_soc_dts_thermal: request_threaded_irq ret -22
[   24.124635] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[   24.124640] uvcvideo 1-4:1.0: Entity type for entity Extension 3 was not initialized!
[   24.124642] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[   24.124645] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[   24.125999] input: HP Truevision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10
[   24.126116] usbcore: registered new interface driver uvcvideo
[   24.126118] USB Video Class driver (1.1.1)
[   24.175615] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   24.175619] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   24.175621] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   24.175623] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   24.175624] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   24.175627] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   24.175629] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   24.195680] intel_rapl: Found RAPL domain package
[   24.195683] intel_rapl: Found RAPL domain core
[   24.292884] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   24.293005] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   24.293113] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   25.997982] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[   25.999699] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[   26.023856] usbcore: registered new interface driver r8188eu
[   26.652965] r8188eu 1-2:1.0 wlx7062b8b469b5: renamed from wlan0
[   27.306654] input: HP WMI hotkeys as /devices/virtual/input/input14
[   28.521962] Adding 8275964k swap on /dev/sda3.  Priority:-1 extents:1 across:8275964k FS
[   34.140547] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   34.204091] nouveau 0000:01:00.0: priv: HUB0: 6013d4 00005700 (1f408200)
[   34.261128] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1f40822c)
[   34.261932] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   36.836258] audit: type=1400 audit(1488319634.085:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=962 comm="apparmor_parser"
[   36.836271] audit: type=1400 audit(1488319634.085:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=962 comm="apparmor_parser"
[   36.837465] audit: type=1400 audit(1488319634.089:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=963 comm="apparmor_parser"
[   36.837479] audit: type=1400 audit(1488319634.089:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=963 comm="apparmor_parser"
[   36.837487] audit: type=1400 audit(1488319634.089:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=963 comm="apparmor_parser"
[   36.837494] audit: type=1400 audit(1488319634.089:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=963 comm="apparmor_parser"
[   36.840195] audit: type=1400 audit(1488319634.089:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=967 comm="apparmor_parser"
[   36.840209] audit: type=1400 audit(1488319634.089:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=967 comm="apparmor_parser"
[   36.843088] audit: type=1400 audit(1488319634.093:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=968 comm="apparmor_parser"
[   36.844969] audit: type=1400 audit(1488319634.093:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=970 comm="apparmor_parser"
[   42.111837] IPv6: ADDRCONF(NETDEV_UP): wlx7062b8b469b5: link is not ready
[   42.575762] MAC Address = 70:62:b8:b4:69:b5
[   42.577274] IPv6: ADDRCONF(NETDEV_UP): wlx7062b8b469b5: link is not ready
[   42.586126] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   42.816963] r8169 0000:02:00.0 enp2s0: link down
[   42.817031] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   43.007374] nouveau 0000:01:00.0: DRM: evicting buffers...
[   43.007379] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   43.007403] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   43.010958] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   43.654997] IPv6: ADDRCONF(NETDEV_UP): wlx7062b8b469b5: link is not ready
[   44.075977] nouveau 0000:01:00.0: DRM: resuming kernel object tree...
[   44.139676] nouveau 0000:01:00.0: priv: HUB0: 6013d4 00005700 (1f408200)
[   44.194188] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1f40822c)
[   44.195390] nouveau 0000:01:00.0: DRM: resuming client object trees...
[   46.138784] R8188EU: ERROR assoc success
[   46.138855] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7062b8b469b5: link becomes ready
[   49.922115] nouveau 0000:01:00.0: DRM: evicting buffers...
[   49.922120] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   49.922145] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   49.925766] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[   53.137832] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   53.137834] Bluetooth: BNEP filters: protocol multicast
[   53.137841] Bluetooth: BNEP socket layer initialized
[   55.691901] [UFW BLOCK] IN=wlx7062b8b469b5 OUT= MAC= SRC=fe80:0000:0000:0000:f5c8:1ca7:c260:75e6 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=562370 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   55.691942] [UFW BLOCK] IN=wlx7062b8b469b5 OUT= MAC= SRC=fe80:0000:0000:0000:f5c8:1ca7:c260:75e6 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=630769 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   55.702153] [UFW BLOCK] IN=wlx7062b8b469b5 OUT= MAC= SRC=fe80:0000:0000:0000:f5c8:1ca7:c260:75e6 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=562370 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   55.702189] [UFW BLOCK] IN=wlx7062b8b469b5 OUT= MAC= SRC=fe80:0000:0000:0000:f5c8:1ca7:c260:75e6 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=630769 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
robingalunicfarizi
Postovi: 52
Pridružen/a: 25 vel 2017, 11:05
Spol: M
OS: Linux Ubuntu 16.04 LTS

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la robingalunicfarizi »

@Abzeenth Eto napokon uspjelo, prije nije htjelo. @Vl@do Hvala na savjetu ;) @bertone, gdje točno u toj aplikaciji, ja vidim samo sistemske particije, kuda dalje?
@vision Moje boot-up vrijeme je 70-75 sekundi, miš se ne pojavi prije 60, probao sam taj log pokrenuti kad je došao spash screen, ali ništa ne pokazuje. Ajoj, kada sam ja probao taj Mint, to je bio užas kolko je bio spor, reset mu je trajao 3 minute, paljenje dvije, a gašenje minimalno jednu.
Avatar
bertone
Site Admin
Postovi: 11557
Pridružen/a: 01 kol 2012, 12:39
Spol: M
OS: LMDE

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la bertone »

robingalunicfarizi je napisao/la:@bertone, gdje točno u toj aplikaciji, ja vidim samo sistemske particije, kuda dalje?
Gore desno bi trebao imati ikonu zupčanika ili kako nešto... klik na nju i otvara ti se popis alata među kojima imaš i smart stanje diska il itako nekako
robingalunicfarizi je napisao/la:Ajoj, kada sam ja probao taj Mint, to je bio užas kolko je bio spor, reset mu je trajao 3 minute, paljenje dvije, a gašenje minimalno jednu.
Ne znamo koji si Mint stavio, no meni i Cinnamon koji je najzahtjevniji uz KDE radi brže od Ubuntua na istom hardveru što upućuje da je ipak neki hardverski problem, problem u nekompatibilnosti Linuxa i tvog hardvera ili da je nastala nekakva greška prilikom isnatalacije.
[+ Prikaži] Klik
ThinkPad T14s Gen. 1
AMD Ryzen 7 PRO 4750U
16 GB DDR4-3200
Samsung SSD 970 EVO Plus 2TB
14" FHD IPS (Innolux N140HCG-GQ2)
WiFi Intel® Wi-Fi® 6 AX200
OS: LMDE 7
Slika: [url=https://i.postimg.cc/fs6gNqZt/Slika-zas ... -58-57.png[/url]

***

ZEN
"Charlie. What are you thinking?"
"I'm thinking about what I want and what I need."
"What do you want?"
"I want a peaceful soul."
"And what do you need?"
"I need a bigger gun."
robingalunicfarizi
Postovi: 52
Pridružen/a: 25 vel 2017, 11:05
Spol: M
OS: Linux Ubuntu 16.04 LTS

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la robingalunicfarizi »

@bertone hvala, našao sam...treba naviknut na ovaj sustav nakon 9 godina windowsa :P Bio mi je Cinnamon 18 ili tako nešto, jako spor je bio, i wifi na njemu je radio jako loše, pa sa zato vratio na ubuntu, tu me jedino muči taj startup :/
Avatar
Vl@do
Moderator
Postovi: 6222
Pridružen/a: 28 lis 2011, 23:31
Spol: M
OS: Arch KDE Plazma
Lokacija: Zagreb
Kontakt:

Re: Ubuntu - dugi boot time, CPU usage i još ponešto

Post Postao/la Vl@do »

robingalunicfarizi je napisao/la:... tu me jedino muči taj startup :/
Ma ne zamaraj se s tim. Kod mene se Arch Xfce dize 65 sec. do punog desktopa (uracunate 2 sec. dok odaberem jednu od 4 distre koje su na HDD-u). Dalo bi se mozda popraviti, ali uopce me to ne brine.
Najbitnija mi je stabilnost i pouzdanost sustava.
Moj pogled na sve to.
Glavna snaga GNU/Linuxa nije besplatnost, nego SLOBODA.
http://wiki.open.hr/wiki/Linux_CLI_naredbe
Odgovori