Linux za Sve forum

izlista čudo toga.. kaj s tim?

[ 0.307261] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.307266] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.307269] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.307274] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
[ 0.307279] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.307285] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.307288] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.307295] pci 0000:00:1c.0: MEM window: 0xf6100000-0xf61fffff
[ 0.307299] pci 0000:00:1c.0: PREFETCH window: 0x80000000-0x801fffff
[ 0.307307] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.307310] pci 0000:00:1c.1: IO window: 0x6000-0x6fff
[ 0.307316] pci 0000:00:1c.1: MEM window: 0xf6200000-0xf62fffff
[ 0.307321] pci 0000:00:1c.1: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.307329] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.307332] pci 0000:00:1c.2: IO window: 0x7000-0x7fff
[ 0.307339] pci 0000:00:1c.2: MEM window: 0x80400000-0x805fffff
[ 0.307344] pci 0000:00:1c.2: PREFETCH window: 0x00000080600000-0x000000807fffff
[ 0.307351] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.307355] pci 0000:00:1c.3: IO window: 0x4000-0x4fff
[ 0.307361] pci 0000:00:1c.3: MEM window: 0xf4000000-0xf60fffff
[ 0.307366] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.307373] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
[ 0.307377] pci 0000:00:1c.4: IO window: 0x5000-0x5fff
[ 0.307383] pci 0000:00:1c.4: MEM window: 0xf8000000-0xf9ffffff
[ 0.307388] pci 0000:00:1c.4: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 0.307395] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
[ 0.307397] pci 0000:00:1e.0: IO window: disabled
[ 0.307403] pci 0000:00:1e.0: MEM window: disabled
[ 0.307408] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.307431] alloc irq_desc for 16 on node -1
[ 0.307434] alloc kstat_irqs on node -1
[ 0.307442] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.307447] pci 0000:00:01.0: setting latency timer to 64
[ 0.307459] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.307464] pci 0000:00:1c.0: setting latency timer to 64
[ 0.307473] alloc irq_desc for 17 on node -1
[ 0.307475] alloc kstat_irqs on node -1
[ 0.307479] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.307484] pci 0000:00:1c.1: setting latency timer to 64
[ 0.307493] alloc irq_desc for 18 on node -1
[ 0.307495] alloc kstat_irqs on node -1
[ 0.307499] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.307504] pci 0000:00:1c.2: setting latency timer to 64
[ 0.307513] alloc irq_desc for 19 on node -1
[ 0.307515] alloc kstat_irqs on node -1
[ 0.307519] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.307524] pci 0000:00:1c.3: setting latency timer to 64
[ 0.307534] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.307539] pci 0000:00:1c.4: setting latency timer to 64
[ 0.307547] pci 0000:00:1e.0: setting latency timer to 64
[ 0.307552] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.307554] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.307557] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.307560] pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
[ 0.307563] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.307566] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.307568] pci_bus 0000:02: resource 1 mem: [0xf6100000-0xf61fffff]
[ 0.307571] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.307574] pci_bus 0000:03: resource 0 io: [0x6000-0x6fff]
[ 0.307576] pci_bus 0000:03: resource 1 mem: [0xf6200000-0xf62fffff]
[ 0.307579] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.307582] pci_bus 0000:04: resource 0 io: [0x7000-0x7fff]
[ 0.307584] pci_bus 0000:04: resource 1 mem: [0x80400000-0x805fffff]
[ 0.307587] pci_bus 0000:04: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.307590] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
[ 0.307592] pci_bus 0000:05: resource 1 mem: [0xf4000000-0xf60fffff]
[ 0.307595] pci_bus 0000:05: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.307597] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff]
[ 0.307600] pci_bus 0000:08: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 0.307603] pci_bus 0000:08: resource 2 pref mem [0xf2000000-0xf3ffffff]
[ 0.307605] pci_bus 0000:0d: resource 3 io: [0x00-0xffff]
[ 0.307608] pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffff]
[ 0.307654] NET: Registered protocol family 2
[ 0.307768] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.308168] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308777] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.309109] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.309112] TCP reno registered
[ 0.309236] NET: Registered protocol family 1
[ 0.309274] alloc irq_desc for 20 on node -1
[ 0.309276] alloc kstat_irqs on node -1
[ 0.309290] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.309312] pci 0000:00:1a.0: PCI INT A disabled
[ 0.309319] pci 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.309339] pci 0000:00:1a.1: PCI INT B disabled
[ 0.309346] pci 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.309364] pci 0000:00:1a.2: PCI INT C disabled
[ 0.309375] pci 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.309407] pci 0000:00:1a.7: PCI INT C disabled
[ 0.309422] alloc irq_desc for 23 on node -1
[ 0.309424] alloc kstat_irqs on node -1
[ 0.309428] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.309446] pci 0000:00:1d.0: PCI INT A disabled
[ 0.309453] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.309470] pci 0000:00:1d.1: PCI INT B disabled
[ 0.309477] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.309495] pci 0000:00:1d.2: PCI INT C disabled
[ 0.309506] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.309521] pci 0000:00:1d.7: PCI INT A disabled
[ 0.309557] pci 0000:01:00.0: Boot video device
[ 0.309602] Simple Boot Flag at 0x57 set to 0x1
[ 0.309795] cpufreq-nforce2: No nForce2 chipset.
[ 0.309824] Scanning for low memory corruption every 60 seconds
[ 0.309938] audit: initializing netlink socket (disabled)
[ 0.309957] type=2000 audit(1346076342.307:1): initialized
[ 0.320103] highmem bounce pool size: 64 pages
[ 0.320112] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.321780] VFS: Disk quotas dquot_6.5.2
[ 0.321850] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.322460] fuse init (API version 7.13)
[ 0.322552] msgmni has been set to 1690
[ 0.322785] alg: No test for stdrng (krng)
[ 0.322847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.322850] io scheduler noop registered
[ 0.322852] io scheduler anticipatory registered
[ 0.322854] io scheduler deadline registered
[ 0.322894] io scheduler cfq registered (default)
[ 0.323066] alloc irq_desc for 24 on node -1
[ 0.323069] alloc kstat_irqs on node -1
[ 0.323079] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.323087] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.323215] alloc irq_desc for 25 on node -1
[ 0.323217] alloc kstat_irqs on node -1
[ 0.323225] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.323234] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.323365] alloc irq_desc for 26 on node -1
[ 0.323367] alloc kstat_irqs on node -1
[ 0.323375] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.323384] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.323515] alloc irq_desc for 27 on node -1
[ 0.323517] alloc kstat_irqs on node -1
[ 0.323524] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.323534] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.323662] alloc irq_desc for 28 on node -1
[ 0.323664] alloc kstat_irqs on node -1
[ 0.323672] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.323681] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.323822] alloc irq_desc for 29 on node -1
[ 0.323824] alloc kstat_irqs on node -1
[ 0.323831] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
[ 0.323848] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.323950] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.324158] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.325305] ACPI: AC Adapter [ADP1] (on-line)
[ 0.325397] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.327573] ACPI: Lid Switch [LID0]
[ 0.327631] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.327638] ACPI: Sleep Button [SLPB]
[ 0.327683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.327685] ACPI: Power Button [PWRF]
[ 0.328664] ACPI: SSDT 7fd1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.329249] ACPI: SSDT 7fd18620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.335937] Monitor-Mwait will be used to enter C-1 state
[ 0.336000] Monitor-Mwait will be used to enter C-2 state
[ 0.336009] Marking TSC unstable due to TSC halts in idle
[ 0.336063] Switching to clocksource hpet
[ 0.336105] processor LNXCPU:00: registered as cooling_device0
[ 0.336649] ACPI: SSDT 7fd19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.337104] ACPI: SSDT 7fd19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.349355] processor LNXCPU:01: registered as cooling_device1
[ 0.369439] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.369451] ACPI: Thermal Zone [TZS0] (48 C)
[ 0.376749] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.376760] ACPI: Thermal Zone [TZS1] (48 C)
[ 0.378533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.379976] brd: module loaded
[ 0.380501] loop: module loaded
[ 0.380609] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.380729] ata_piix 0000:00:1f.2: version 2.13
[ 0.380750] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.380756] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.380805] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.380901] scsi0 : ata_piix
[ 0.380980] scsi1 : ata_piix
[ 0.381028] ata1: SATA max UDMA/133 cmd 0x18f0 ctl 0x18e4 bmdma 0x18d0 irq 19
[ 0.381033] ata2: SATA max UDMA/133 cmd 0x18e8 ctl 0x18e0 bmdma 0x18d8 irq 19
[ 0.381056] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.381061] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.381097] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.381137] scsi2 : ata_piix
[ 0.381196] Freeing initrd memory: 7809k freed
[ 0.381202] scsi3 : ata_piix
[ 0.381243] ata3: SATA max UDMA/133 cmd 0x1c48 ctl 0x18fc bmdma 0x1c30 irq 19
[ 0.381248] ata4: SATA max UDMA/133 cmd 0x1c40 ctl 0x18f8 bmdma 0x1c38 irq 19
[ 0.381647] Fixed MDIO Bus: probed
[ 0.381694] PPP generic driver version 2.4.2
[ 0.381847] tun: Universal TUN/TAP device driver, 1.6
[ 0.381850] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.382038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.382094] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.382140] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.382144] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.382197] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.382264] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.386152] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.386162] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.386198] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf6504000
[ 0.386208] isapnp: Scanning for PnP cards...
[ 0.404012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.404152] usb usb1: configuration #1 chosen from 1 choice
[ 0.404184] hub 1-0:1.0: USB hub found
[ 0.404195] hub 1-0:1.0: 6 ports detected
[ 0.404267] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.404289] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.404293] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.404339] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.404375] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.408272] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.408287] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6504400
[ 0.424233] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.424317] usb usb2: configuration #1 chosen from 1 choice
[ 0.424348] hub 2-0:1.0: USB hub found
[ 0.424355] hub 2-0:1.0: 6 ports detected
[ 0.424418] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.424438] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.424482] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.424490] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.424494] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.424528] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.424552] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[ 0.424646] usb usb3: configuration #1 chosen from 1 choice
[ 0.424672] hub 3-0:1.0: USB hub found
[ 0.424679] hub 3-0:1.0: 2 ports detected
[ 0.424725] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.424732] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.424735] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.424771] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.424794] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[ 0.424885] usb usb4: configuration #1 chosen from 1 choice
[ 0.424912] hub 4-0:1.0: USB hub found
[ 0.424919] hub 4-0:1.0: 2 ports detected
[ 0.424962] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.424972] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.424975] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.425007] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.425030] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001840
[ 0.425120] usb usb5: configuration #1 chosen from 1 choice
[ 0.425146] hub 5-0:1.0: USB hub found
[ 0.425152] hub 5-0:1.0: 2 ports detected
[ 0.425200] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.425208] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.425211] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.425248] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.425271] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.425359] usb usb6: configuration #1 chosen from 1 choice
[ 0.425386] hub 6-0:1.0: USB hub found
[ 0.425393] hub 6-0:1.0: 2 ports detected
[ 0.425437] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.425444] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.425448] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.425482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.425514] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[ 0.425602] usb usb7: configuration #1 chosen from 1 choice
[ 0.425628] hub 7-0:1.0: USB hub found
[ 0.425635] hub 7-0:1.0: 2 ports detected
[ 0.425681] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.425690] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.425694] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.425726] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.425756] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 0.425850] usb usb8: configuration #1 chosen from 1 choice
[ 0.425876] hub 8-0:1.0: USB hub found
[ 0.425883] hub 8-0:1.0: 2 ports detected
[ 0.425983] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.447255] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.447264] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.447347] mice: PS/2 mouse device common for all mice
[ 0.447478] rtc_cmos 00:08: RTC can wake from S4
[ 0.447515] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.447540] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.447651] device-mapper: uevent: version 1.0.3
[ 0.447758] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.447824] device-mapper: multipath: version 1.1.0 loaded
[ 0.447826] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.447942] EISA: Probing bus 0 at eisa.0
[ 0.447948] Cannot allocate resource for EISA slot 1
[ 0.447952] Cannot allocate resource for EISA slot 2
[ 0.447954] Cannot allocate resource for EISA slot 3
[ 0.447956] Cannot allocate resource for EISA slot 4
[ 0.447958] Cannot allocate resource for EISA slot 5
[ 0.447960] Cannot allocate resource for EISA slot 6
[ 0.447963] Cannot allocate resource for EISA slot 7
[ 0.447968] EISA: Detected 0 cards.
[ 0.448108] cpuidle: using governor ladder
[ 0.448201] cpuidle: using governor menu
[ 0.448645] TCP cubic registered
[ 0.448807] NET: Registered protocol family 10
[ 0.449646] NET: Registered protocol family 17
[ 0.450358] Using IPI No-Shortcut mode
[ 0.450443] PM: Resume from disk failed.
[ 0.450456] registered taskstats version 1
[ 0.451242] Magic number: 8:40:82
[ 0.451323] rtc_cmos 00:08: setting system clock to 2012-08-27 14:05:42 UTC (1346076342)
[ 0.451326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.451328] EDD information not available.
[ 0.468261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.722766] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.733529] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.733672] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 0.743939] isapnp: No Plug & Play device found
[ 0.888068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.888230] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.896515] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
[ 0.904473] usb 1-3: configuration #1 chosen from 1 choice
[ 0.912283] ata2.00: configured for UDMA/133
[ 0.951062] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 0.951066] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.965882] ata1.00: configured for UDMA/133
[ 0.966033] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
[ 0.966164] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.966177] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.966210] sd 0:0:0:0: [sda] Write Protect is off
[ 0.966213] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.966241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.966378] sda: sda1 sda2 < sda5 >
[ 0.991223] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.024898] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RP05 PQ: 0 ANSI: 5
[ 1.355036] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.355039] Uniform CD-ROM driver Revision: 3.20
[ 1.355128] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.355179] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.355249] Freeing unused kernel memory: 664k freed
[ 1.355626] Write protecting the kernel text: 4700k
[ 1.355680] Write protecting the kernel read-only data: 1848k
[ 1.374985] udev: starting version 151
[ 1.388059] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 1.449191] sky2 driver version 1.25
[ 1.449307] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.449357] sky2 0000:02:00.0: setting latency timer to 64
[ 1.449444] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
[ 1.450063] alloc irq_desc for 30 on node -1
[ 1.450066] alloc kstat_irqs on node -1
[ 1.450140] sky2 0000:02:00.0: irq 30 for MSI/MSI-X
[ 1.451592] sky2 eth0: addr 00:1d:72:cb:a3:0f
[ 1.565425] usb 6-2: configuration #1 chosen from 1 choice
[ 1.578948] usbcore: registered new interface driver hiddev
[ 1.591533] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5
[ 1.591636] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
[ 1.591667] usbcore: registered new interface driver usbhid
[ 1.591670] usbhid: v2.6:USB HID core driver
[ 1.723172] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 15.437461] Adding 2440184k swap on /dev/sda1. Priority:-1 extents:1 across:2440184k
[ 15.441470] udev: starting version 151
[ 15.574515] lp: driver loaded but no devices found
[ 15.604841] vga16fb: initializing
[ 15.604846] vga16fb: mapped to 0xc00a0000
[ 15.604923] fb0: VGA16 VGA frame buffer device
[ 15.606945] Linux agpgart interface v0.103
[ 15.732915] cfg80211: Calling CRDA to update world regulatory domain
[ 15.736324] Linux video capture interface: v2.00
[ 15.740948] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
[ 15.755266] acpi device:02: registered as cooling_device2
[ 15.755453] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[ 15.755512] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.760650] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7
[ 15.760801] usbcore: registered new interface driver uvcvideo
[ 15.760865] USB Video Class driver (v0.1.0)
[ 15.796482] cfg80211: World regulatory domain updated:
[ 15.796488] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.796491] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.796494] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.796497] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.796499] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.796502] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.796954] nvidia: module license 'NVIDIA' taints kernel.
[ 15.796957] Disabling lock debugging due to kernel taint
[ 15.830442] type=1505 audit(1346069157.876:2): operation="profile_load" pid=587 name="/sbin/dhclient3"
[ 15.831169] type=1505 audit(1346069157.876:3): operation="profile_load" pid=587 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.831571] type=1505 audit(1346069157.876:4): operation="profile_load" pid=587 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.824447] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 16.838498] acer-wmi: Brightness must be controlled by generic video driver
[ 16.869026] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.869038] ath9k 0000:03:00.0: setting latency timer to 64
[ 16.872323] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.872338] nvidia 0000:01:00.0: setting latency timer to 64
[ 16.872344] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.872507] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 16.979467] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.979508] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 16.979517] alloc irq_desc for 21 on node -1
[ 16.979519] alloc kstat_irqs on node -1
[ 16.979527] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 16.979570] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.065768] Console: switching to colour frame buffer device 80x30
[ 17.189100] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000/0x0
[ 17.200854] hda_codec: ALC888: BIOS auto-probing.
[ 17.202464] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 17.267318] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 17.302054] ath: EEPROM regdomain: 0x65
[ 17.302057] ath: EEPROM indicates we should expect a direct regpair map
[ 17.302061] ath: Country alpha2 being used: 00
[ 17.302063] ath: Regpair used: 0x65
[ 17.309267] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 17.310060] Registered led device: ath9k-phy0::radio
[ 17.310080] Registered led device: ath9k-phy0::assoc
[ 17.310097] Registered led device: ath9k-phy0::tx
[ 17.310114] Registered led device: ath9k-phy0::rx
[ 17.310126] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf9a20000, irq=17
[ 17.502764] type=1505 audit(1346069159.549:5): operation="profile_replace" pid=781 name="/sbin/dhclient3"
[ 17.503285] type=1505 audit(1346069159.549:6): operation="profile_load" pid=780 name="/usr/share/gdm/guest-session/Xsession"
[ 17.503518] type=1505 audit(1346069159.549:7): operation="profile_replace" pid=781 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.503933] type=1505 audit(1346069159.549:8): operation="profile_replace" pid=781 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.509208] sky2 eth0: enabling interface
[ 17.510035] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.516049] usb 6-2: USB disconnect, address 2
[ 17.521089] type=1505 audit(1346069159.569:9): operation="profile_load" pid=782 name="/usr/bin/evince"
[ 17.526056] type=1505 audit(1346069159.573:10): operation="profile_load" pid=784 name="/usr/bin/freshclam"
[ 17.530201] type=1505 audit(1346069159.577:11): operation="profile_load" pid=785 name="/usr/lib/cups/backend/cups-pdf"
[ 17.548321] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.309517] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 18.486425] usb 6-2: configuration #1 chosen from 1 choice
[ 18.502562] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input10
[ 18.502680] generic-usb 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
[ 18.832810] ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
[ 18.832853] ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
[ 19.000052] usb 6-2: USB disconnect, address 3
[ 20.480039] usb 6-2: new low speed USB device using uhci_hcd and address 4
[ 20.653433] usb 6-2: configuration #1 chosen from 1 choice
[ 20.669565] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input11
[ 20.669686] generic-usb 0003:1C4F:0003.0003: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
[ 20.984076] usb 6-2: USB disconnect, address 4
[ 21.969037] usb 6-2: new low speed USB device using uhci_hcd and address 5
[ 22.141442] usb 6-2: configuration #1 chosen from 1 choice
[ 22.157565] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input12
[ 22.157693] generic-usb 0003:1C4F:0003.0004: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
[ 24.516130] ppdev: user-space parallel port driver
[ 51.466297] wlan0: direct probe to AP 78:8c:54:00:e6:f6 (try 1)
[ 51.466322] wlan0: deauthenticating from 78:8c:54:00:e6:f6 by local choice (reason=3)
[ 51.466347] wlan0: direct probe to AP 78:8c:54:00:e6:f6 (try 1)
[ 51.469628] wlan0: direct probe responded
[ 51.469633] wlan0: authenticate with AP 78:8c:54:00:e6:f6 (try 1)
[ 51.474748] wlan0: authenticated
[ 51.474769] wlan0: associate with AP 78:8c:54:00:e6:f6 (try 1)
[ 51.477554] wlan0: RX AssocResp from 78:8c:54:00:e6:f6 (capab=0x411 status=0 aid=1)
[ 51.477557] wlan0: associated
[ 51.477844] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 61.648028] wlan0: no IPv6 routers present
[ 2134.948291] ath9k: Failed to stop TX DMA in 100 msec after killing last frame
[ 2134.956625] ath9k: Failed to stop TX DMA in 100 msec after killing last frame
[ 2134.956649] ath9k: Unable to stop TxDMA. Reset HAL!
[ 2208.021361] CE: hpet increasing min_delta_ns to 40226 nsec
[ 9478.893672] __ratelimit: 15 callbacks suppressed
[ 9478.893676] vlc[3357]: segfault at 10b678f ip 00676914 sp b71fe9e0 error 4 in libc-2.11.1.so[648000+153000]
marcel@marcel-laptop:~$

)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.322552] msgmni has been set to 1690
Aug 27 14:05:59 marcel-laptop kernel: [ 0.322785] alg: No test for stdrng (krng)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.322847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.322850] io scheduler noop registered
Aug 27 14:05:59 marcel-laptop kernel: [ 0.322852] io scheduler anticipatory registered
Aug 27 14:05:59 marcel-laptop kernel: [ 0.322854] io scheduler deadline registered
Aug 27 14:05:59 marcel-laptop kernel: [ 0.322894] io scheduler cfq registered (default)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.323950] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 27 14:05:59 marcel-laptop kernel: [ 0.324158] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Aug 27 14:05:59 marcel-laptop kernel: [ 0.325305] ACPI: AC Adapter [ADP1] (on-line)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.325397] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Aug 27 14:05:59 marcel-laptop kernel: [ 0.327573] ACPI: Lid Switch [LID0]
Aug 27 14:05:59 marcel-laptop kernel: [ 0.327631] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.327638] ACPI: Sleep Button [SLPB]
Aug 27 14:05:59 marcel-laptop kernel: [ 0.327683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 27 14:05:59 marcel-laptop kernel: [ 0.327685] ACPI: Power Button [PWRF]
Aug 27 14:05:59 marcel-laptop kernel: [ 0.328664] ACPI: SSDT 7fd1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.329249] ACPI: SSDT 7fd18620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.336009] Marking TSC unstable due to TSC halts in idle
Aug 27 14:05:59 marcel-laptop kernel: [ 0.336063] Switching to clocksource hpet
Aug 27 14:05:59 marcel-laptop kernel: [ 0.336105] processor LNXCPU:00: registered as cooling_device0
Aug 27 14:05:59 marcel-laptop kernel: [ 0.336649] ACPI: SSDT 7fd19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.337104] ACPI: SSDT 7fd19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.349355] processor LNXCPU:01: registered as cooling_device1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.369439] thermal LNXTHERM:01: registered as thermal_zone0
Aug 27 14:05:59 marcel-laptop kernel: [ 0.369451] ACPI: Thermal Zone [TZS0] (48 C)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.376749] thermal LNXTHERM:02: registered as thermal_zone1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.376760] ACPI: Thermal Zone [TZS1] (48 C)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.378533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 27 14:05:59 marcel-laptop kernel: [ 0.379976] brd: module loaded
Aug 27 14:05:59 marcel-laptop kernel: [ 0.380501] loop: module loaded
Aug 27 14:05:59 marcel-laptop kernel: [ 0.380609] input: Macintosh mouse button emulation as /devices/virtual/input/input3
Aug 27 14:05:59 marcel-laptop kernel: [ 0.380750] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Aug 27 14:05:59 marcel-laptop kernel: [ 0.380756] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Aug 27 14:05:59 marcel-laptop kernel: [ 0.380901] scsi0 : ata_piix
Aug 27 14:05:59 marcel-laptop kernel: [ 0.380980] scsi1 : ata_piix
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381028] ata1: SATA max UDMA/133 cmd 0x18f0 ctl 0x18e4 bmdma 0x18d0 irq 19
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381033] ata2: SATA max UDMA/133 cmd 0x18e8 ctl 0x18e0 bmdma 0x18d8 irq 19
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381056] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381061] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381137] scsi2 : ata_piix
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381196] Freeing initrd memory: 7809k freed
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381202] scsi3 : ata_piix
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381243] ata3: SATA max UDMA/133 cmd 0x1c48 ctl 0x18fc bmdma 0x1c30 irq 19
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381248] ata4: SATA max UDMA/133 cmd 0x1c40 ctl 0x18f8 bmdma 0x1c38 irq 19
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381647] Fixed MDIO Bus: probed
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381694] PPP generic driver version 2.4.2
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381847] tun: Universal TUN/TAP device driver, 1.6
Aug 27 14:05:59 marcel-laptop kernel: [ 0.381850] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Aug 27 14:05:59 marcel-laptop kernel: [ 0.382038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 27 14:05:59 marcel-laptop kernel: [ 0.382094] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
Aug 27 14:05:59 marcel-laptop kernel: [ 0.382144] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.382197] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.382264] ehci_hcd 0000:00:1a.7: debug port 1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.386162] ACPI: Battery Slot [BAT0] (battery absent)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.386198] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf6504000
Aug 27 14:05:59 marcel-laptop kernel: [ 0.386208] isapnp: Scanning for PnP cards...
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404152] usb usb1: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404184] hub 1-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404195] hub 1-0:1.0: 6 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404267] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404293] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404339] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Aug 27 14:05:59 marcel-laptop kernel: [ 0.404375] ehci_hcd 0000:00:1d.7: debug port 1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.408287] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6504400
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424233] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424317] usb usb2: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424348] hub 2-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424355] hub 2-0:1.0: 6 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424418] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424438] uhci_hcd: USB Universal Host Controller Interface driver
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424482] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424494] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424528] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424552] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424646] usb usb3: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424672] hub 3-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424679] hub 3-0:1.0: 2 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424725] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424735] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424771] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424794] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424885] usb usb4: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424912] hub 4-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424919] hub 4-0:1.0: 2 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424962] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
Aug 27 14:05:59 marcel-laptop kernel: [ 0.424975] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425007] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425030] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001840
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425120] usb usb5: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425146] hub 5-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425152] hub 5-0:1.0: 2 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425200] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425211] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425248] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425271] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425359] usb usb6: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425386] hub 6-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425393] hub 6-0:1.0: 2 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425437] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425448] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425514] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425602] usb usb7: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425628] hub 7-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425635] hub 7-0:1.0: 2 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425681] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425694] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425726] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425756] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425850] usb usb8: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425876] hub 8-0:1.0: USB hub found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425883] hub 8-0:1.0: 2 ports detected
Aug 27 14:05:59 marcel-laptop kernel: [ 0.425983] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447255] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447264] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447347] mice: PS/2 mouse device common for all mice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447478] rtc_cmos 00:08: RTC can wake from S4
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447515] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447540] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447651] device-mapper: uevent: version 1.0.3
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447758] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447824] device-mapper: multipath: version 1.1.0 loaded
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447826] device-mapper: multipath round-robin: version 1.0.0 loaded
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447942] EISA: Probing bus 0 at eisa.0
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447948] Cannot allocate resource for EISA slot 1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447952] Cannot allocate resource for EISA slot 2
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447954] Cannot allocate resource for EISA slot 3
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447956] Cannot allocate resource for EISA slot 4
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447958] Cannot allocate resource for EISA slot 5
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447960] Cannot allocate resource for EISA slot 6
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447963] Cannot allocate resource for EISA slot 7
Aug 27 14:05:59 marcel-laptop kernel: [ 0.447968] EISA: Detected 0 cards.
Aug 27 14:05:59 marcel-laptop kernel: [ 0.448108] cpuidle: using governor ladder
Aug 27 14:05:59 marcel-laptop kernel: [ 0.448201] cpuidle: using governor menu
Aug 27 14:05:59 marcel-laptop kernel: [ 0.448645] TCP cubic registered
Aug 27 14:05:59 marcel-laptop kernel: [ 0.448807] NET: Registered protocol family 10
Aug 27 14:05:59 marcel-laptop kernel: [ 0.449646] NET: Registered protocol family 17
Aug 27 14:05:59 marcel-laptop kernel: [ 0.450358] Using IPI No-Shortcut mode
Aug 27 14:05:59 marcel-laptop kernel: [ 0.450456] registered taskstats version 1
Aug 27 14:05:59 marcel-laptop kernel: [ 0.451242] Magic number: 8:40:82
Aug 27 14:05:59 marcel-laptop kernel: [ 0.451323] rtc_cmos 00:08: setting system clock to 2012-08-27 14:05:42 UTC (1346076342)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.451326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.451328] EDD information not available.
Aug 27 14:05:59 marcel-laptop kernel: [ 0.468261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Aug 27 14:05:59 marcel-laptop kernel: [ 0.722766] ata4: SATA link down (SStatus 0 SControl 300)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.733529] ata3: SATA link down (SStatus 0 SControl 300)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.733672] usb 1-3: new high speed USB device using ehci_hcd and address 2
Aug 27 14:05:59 marcel-laptop kernel: [ 0.743939] isapnp: No Plug & Play device found
Aug 27 14:05:59 marcel-laptop kernel: [ 0.888068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.888230] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.896515] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
Aug 27 14:05:59 marcel-laptop kernel: [ 0.904473] usb 1-3: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 0.912283] ata2.00: configured for UDMA/133
Aug 27 14:05:59 marcel-laptop kernel: [ 0.951062] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
Aug 27 14:05:59 marcel-laptop kernel: [ 0.951066] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.965882] ata1.00: configured for UDMA/133
Aug 27 14:05:59 marcel-laptop kernel: [ 0.966033] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
Aug 27 14:05:59 marcel-laptop kernel: [ 0.966164] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Aug 27 14:05:59 marcel-laptop kernel: [ 0.966177] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 27 14:05:59 marcel-laptop kernel: [ 0.966210] sd 0:0:0:0: [sda] Write Protect is off
Aug 27 14:05:59 marcel-laptop kernel: [ 0.966241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 27 14:05:59 marcel-laptop kernel: [ 0.966378] sda: sda1 sda2 < sda5 >
Aug 27 14:05:59 marcel-laptop kernel: [ 0.991223] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 27 14:05:59 marcel-laptop kernel: [ 1.024898] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RP05 PQ: 0 ANSI: 5
Aug 27 14:05:59 marcel-laptop kernel: [ 1.355036] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 27 14:05:59 marcel-laptop kernel: [ 1.355039] Uniform CD-ROM driver Revision: 3.20
Aug 27 14:05:59 marcel-laptop kernel: [ 1.355179] sr 1:0:0:0: Attached scsi generic sg1 type 5
Aug 27 14:05:59 marcel-laptop kernel: [ 1.355249] Freeing unused kernel memory: 664k freed
Aug 27 14:05:59 marcel-laptop kernel: [ 1.355626] Write protecting the kernel text: 4700k
Aug 27 14:05:59 marcel-laptop kernel: [ 1.355680] Write protecting the kernel read-only data: 1848k
Aug 27 14:05:59 marcel-laptop kernel: [ 1.374985] udev: starting version 151
Aug 27 14:05:59 marcel-laptop kernel: [ 1.388059] usb 6-2: new low speed USB device using uhci_hcd and address 2
Aug 27 14:05:59 marcel-laptop kernel: [ 1.449191] sky2 driver version 1.25
Aug 27 14:05:59 marcel-laptop kernel: [ 1.449307] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 27 14:05:59 marcel-laptop kernel: [ 1.449444] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
Aug 27 14:05:59 marcel-laptop kernel: [ 1.451592] sky2 eth0: addr 00:1d:72:cb:a3:0f
Aug 27 14:05:59 marcel-laptop kernel: [ 1.565425] usb 6-2: configuration #1 chosen from 1 choice
Aug 27 14:05:59 marcel-laptop kernel: [ 1.578948] usbcore: registered new interface driver hiddev
Aug 27 14:05:59 marcel-laptop kernel: [ 1.591533] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5
Aug 27 14:05:59 marcel-laptop kernel: [ 1.591636] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
Aug 27 14:05:59 marcel-laptop kernel: [ 1.591667] usbcore: registered new interface driver usbhid
Aug 27 14:05:59 marcel-laptop kernel: [ 1.591670] usbhid: v2.6:USB HID core driver
Aug 27 14:05:59 marcel-laptop kernel: [ 1.723172] EXT4-fs (sda5): mounted filesystem with ordered data mode
Aug 27 14:05:59 marcel-laptop kernel: [ 15.437461] Adding 2440184k swap on /dev/sda1. Priority:-1 extents:1 across:2440184k
Aug 27 14:05:59 marcel-laptop kernel: [ 15.441470] udev: starting version 151
Aug 27 14:05:59 marcel-laptop kernel: [ 15.574515] lp: driver loaded but no devices found
Aug 27 14:05:59 marcel-laptop kernel: [ 15.604846] vga16fb: mapped to 0xc00a0000
Aug 27 14:05:59 marcel-laptop kernel: [ 15.604923] fb0: VGA16 VGA frame buffer device
Aug 27 14:05:59 marcel-laptop kernel: [ 15.606945] Linux agpgart interface v0.103
Aug 27 14:05:59 marcel-laptop kernel: [ 15.732915] cfg80211: Calling CRDA to update world regulatory domain
Aug 27 14:05:59 marcel-laptop kernel: [ 15.736324] Linux video capture interface: v2.00
Aug 27 14:05:59 marcel-laptop kernel: [ 15.740948] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.755266] acpi device:02: registered as cooling_device2
Aug 27 14:05:59 marcel-laptop kernel: [ 15.755453] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
Aug 27 14:05:59 marcel-laptop kernel: [ 15.755512] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.760650] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input7
Aug 27 14:05:59 marcel-laptop kernel: [ 15.760801] usbcore: registered new interface driver uvcvideo
Aug 27 14:05:59 marcel-laptop kernel: [ 15.760865] USB Video Class driver (v0.1.0)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796482] cfg80211: World regulatory domain updated:
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796488] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796491] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796494] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796497] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796499] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796502] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796954] nvidia: module license 'NVIDIA' taints kernel.
Aug 27 14:05:59 marcel-laptop kernel: [ 15.796957] Disabling lock debugging due to kernel taint
Aug 27 14:05:59 marcel-laptop kernel: [ 15.830442] type=1505 audit(1346069157.876:2): operation="profile_load" pid=587 name="/sbin/dhclient3"
Aug 27 14:05:59 marcel-laptop kernel: [ 15.831169] type=1505 audit(1346069157.876:3): operation="profile_load" pid=587 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Aug 27 14:05:59 marcel-laptop kernel: [ 15.831571] type=1505 audit(1346069157.876:4): operation="profile_load" pid=587 name="/usr/lib/connman/scripts/dhclient-script"
Aug 27 14:05:59 marcel-laptop kernel: [ 16.824447] acer-wmi: Acer Laptop ACPI-WMI Extras
Aug 27 14:05:59 marcel-laptop kernel: [ 16.838498] acer-wmi: Brightness must be controlled by generic video driver
Aug 27 14:05:59 marcel-laptop kernel: [ 16.869026] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Aug 27 14:05:59 marcel-laptop kernel: [ 16.872323] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 27 14:05:59 marcel-laptop kernel: [ 16.872344] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Aug 27 14:05:59 marcel-laptop kernel: [ 16.872507] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
Aug 27 14:05:59 marcel-laptop kernel: [ 16.979467] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
Aug 27 14:05:59 marcel-laptop kernel: [ 16.979508] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
Aug 27 14:05:59 marcel-laptop kernel: [ 16.979527] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Aug 27 14:05:59 marcel-laptop kernel: [ 17.065768] Console: switching to colour frame buffer device 80x30
Aug 27 14:05:59 marcel-laptop kernel: [ 17.189100] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000/0x0
Aug 27 14:05:59 marcel-laptop kernel: [ 17.200854] hda_codec: ALC888: BIOS auto-probing.
Aug 27 14:05:59 marcel-laptop kernel: [ 17.202464] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
Aug 27 14:05:59 marcel-laptop kernel: [ 17.267318] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
Aug 27 14:05:59 marcel-laptop kernel: [ 17.310060] Registered led device: ath9k-phy0::radio
Aug 27 14:05:59 marcel-laptop kernel: [ 17.310080] Registered led device: ath9k-phy0::assoc
Aug 27 14:05:59 marcel-laptop kernel: [ 17.310097] Registered led device: ath9k-phy0::tx
Aug 27 14:05:59 marcel-laptop kernel: [ 17.310114] Registered led device: ath9k-phy0::rx
Aug 27 14:05:59 marcel-laptop kernel: [ 17.310126] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf9a20000, irq=17
Aug 27 14:05:59 marcel-laptop kernel: [ 17.502764] type=1505 audit(1346069159.549:5): operation="profile_replace" pid=781 name="/sbin/dhclient3"
Aug 27 14:05:59 marcel-laptop kernel: [ 17.503285] type=1505 audit(1346069159.549:6): operation="profile_load" pid=780 name="/usr/share/gdm/guest-session/Xsession"
Aug 27 14:05:59 marcel-laptop kernel: [ 17.503518] type=1505 audit(1346069159.549:7): operation="profile_replace" pid=781 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
Aug 27 14:05:59 marcel-laptop kernel: [ 17.503933] type=1505 audit(1346069159.549:8): operation="profile_replace" pid=781 name="/usr/lib/connman/scripts/dhclient-script"
Aug 27 14:05:59 marcel-laptop kernel: [ 17.509208] sky2 eth0: enabling interface
Aug 27 14:05:59 marcel-laptop kernel: [ 17.510035] ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 27 14:05:59 marcel-laptop kernel: [ 17.516049] usb 6-2: USB disconnect, address 2
Aug 27 14:05:59 marcel-laptop kernel: [ 17.521089] type=1505 audit(1346069159.569:9): operation="profile_load" pid=782 name="/usr/bin/evince"
Aug 27 14:05:59 marcel-laptop kernel: [ 17.526056] type=1505 audit(1346069159.573:10): operation="profile_load" pid=784 name="/usr/bin/freshclam"
Aug 27 14:05:59 marcel-laptop kernel: [ 17.530201] type=1505 audit(1346069159.577:11): operation="profile_load" pid=785 name="/usr/lib/cups/backend/cups-pdf"
Aug 27 14:05:59 marcel-laptop kernel: [ 17.548321] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug 27 14:06:00 marcel-laptop kernel: [ 18.309517] usb 6-2: new low speed USB device using uhci_hcd and address 3
Aug 27 14:06:00 marcel-laptop kernel: [ 18.486425] usb 6-2: configuration #1 chosen from 1 choice
Aug 27 14:06:00 marcel-laptop kernel: [ 18.502562] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input10
Aug 27 14:06:00 marcel-laptop kernel: [ 18.502680] generic-usb 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
Aug 27 14:06:00 marcel-laptop kernel: [ 18.832810] ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
Aug 27 14:06:00 marcel-laptop kernel: [ 18.832853] ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
Aug 27 14:06:01 marcel-laptop kernel: [ 19.000052] usb 6-2: USB disconnect, address 3
Aug 27 14:06:02 marcel-laptop kernel: [ 20.480039] usb 6-2: new low speed USB device using uhci_hcd and address 4
Aug 27 14:06:02 marcel-laptop kernel: [ 20.653433] usb 6-2: configuration #1 chosen from 1 choice
Aug 27 14:06:02 marcel-laptop kernel: [ 20.669565] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input11
Aug 27 14:06:02 marcel-laptop kernel: [ 20.669686] generic-usb 0003:1C4F:0003.0003: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
Aug 27 14:06:03 marcel-laptop kernel: [ 20.984076] usb 6-2: USB disconnect, address 4
Aug 27 14:06:04 marcel-laptop kernel: [ 21.969037] usb 6-2: new low speed USB device using uhci_hcd and address 5
Aug 27 14:06:04 marcel-laptop kernel: [ 22.141442] usb 6-2: configuration #1 chosen from 1 choice
Aug 27 14:06:04 marcel-laptop kernel: [ 22.157565] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input12
Aug 27 14:06:04 marcel-laptop kernel: [ 22.157693] generic-usb 0003:1C4F:0003.0004: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-2/input0
Aug 27 14:06:06 marcel-laptop kernel: [ 24.516130] ppdev: user-space parallel port driver
Aug 27 14:06:11 marcel-laptop python: hp-systray[1159]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
Aug 27 14:06:33 marcel-laptop kernel: [ 51.477844] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Aug 27 14:42:30 marcel-laptop kernel: [ 2208.021361] CE: hpet increasing min_delta_ns to 40226 nsec
Aug 27 16:43:40 marcel-laptop kernel: [ 9478.893672] __ratelimit: 15 callbacks suppressed
Aug 27 16:43:40 marcel-laptop kernel: [ 9478.893676] vlc[3357]: segfault at 10b678f ip 00676914 sp b71fe9e0 error 4 in libc-2.11.1.so[648000+153000]

mogao si to staviti na pastie/pastebin/nešto takvo.

A zašto ti ne izbrišeš komp i instaliraš svježu distru... ? Probaj od početka jbg

Uglavnom se sve može riješiti bez reinstalacije, neka to bude zadnja stvar za učiniti kad se susretne s problemom.

Jeah right... to neki expert koji "čita kernel" da ali drugi... poštedi se muke i nanovo majstore..

To je "windows" način razmišljanja
Vrijeme je za promjene

Captain Hook je napisao/la:Jeah right... to neki expert koji "čita kernel" da ali drugi... poštedi se muke i nanovo majstore..

Kao što blacx kaže, to je Windows način razmišljanja, i neće se poštediti muke već ju samo odgoditi koji mjesec-dva (možda i kraće), pa onda kad se opet pojavi, što, opet reinstall?
EDIT: inače, od errora jedino što sam uočio je segfault u vlcu.

E pa onda mu pomognite ajde bas me zanima ako ce uspjet to zbiksat... Istina da imam windows razmosljanje.. To je "the easy way" ali izgleda linux razmisljanje je "the hard way"... Ili to vi zbiksate u tren oka?