Ti se to dogada cak i kad nije pokrenuta nijedna aplikacija ili? Jesi sta prckao po sistemu prije nego sto ti se taj problem prvotno poceo pojavljivat? Imas kakve dockove na desktopu ili neki compositing manager(compiz)? Stavi te stare drivere i daj molimte output od dmesg i sadrzaj /var/log/Xorg.0.log, nakon sto ti pocne stekat/stavec... Ako te previse zeza sistem odi na ctrl+alt+f1 logiraj se i napravi sudo /etc/init.d/gdm stop pa probaj onda izvuc te fileove... Ako neide tako onda restartaj komp pa daj sadrzaj od /var/log/kernel.log.1 i /var/log/Xorg.0.log.old.
Hvala.
EDIT:
I da, ne postoji ti nista kao system restore, barem ne sto je instalirano by default AFAIK.
EDIT2:
Ti je sistem updatean?
Ubuntu random logout
Moderator/ica: Moderatori/ce
Re: Ubuntu random logout
Cisto hinta radi, segfault o kojem se prica je Xorg related, ne nvidia related.
When you're a kid and you wanna go "Weee !", but you ain't got drugs yet ... You hold out for your life, hold on to your little GONADS ... and STRIFE.
Re: Ubuntu random logout
Po cemu si siguran u to?
Re: Ubuntu random logout
Izvadak:Netko je napisao/la:Po cemu si siguran u to?
Indikacija na nvidia_drv.so postoji, no linija gore kaze da je Xorg pokusao pristupiti memorijskoj lokaciji kojoj nema pravo pristupa (sto je vezano uz nvidia driver), pa mu je kernel lupio samar (naravno, jer je Xorg bezobraznik).[16215.786435] Xorg[1151]: segfault at b4fa9000 ip b48eb33e sp bf92a6d0 error 7 in nvidia_drv.so[b482d000+706000]
Kao sto si naveo u postu prije, Xorg.*.log datoteka bi trebala otkriti vise detalja. Ne odbacujem los driver kao uzrok, jer novo ponasanje OP-ova sustava dolazi nakon instalacije drivera koju ste izvrsili ranije.
When you're a kid and you wanna go "Weee !", but you ain't got drugs yet ... You hold out for your life, hold on to your little GONADS ... and STRIFE.
-
vkrajacic89
- Postovi: 98
- Pridružen/a: 10 tra 2012, 13:28
- Spol: M
- OS: Arch Linux
- Lokacija: /home/Samobor
- Kontakt:
Re: Ubuntu random logout
Da događa se čim uđem u sustav. Treba mi par minuta samo da se keyringa rješim. Skroz je smrznut kad uđem.Netko je napisao/la:Ti se to dogada cak i kad nije pokrenuta nijedna aplikacija ili?
Nisam ništa prčkao. Ovako je to krenulo. Nakon jednog upgradea cijelog sustava kroz update manager, nakon restarta maknuli su mi se driveri. Kad sam ušao unutra, reza je bila na najniže. Nije mi išlo u glavu kako je upgrade mogo maknut video drivere. Instalirao sam ih nanovo naredbom :Netko je napisao/la:Jesi sta prckao po sistemu prije nego sto ti se taj problem prvotno poceo pojavljivat?
Kod: Označi sve
sudo apt-get install nvidia-currentDockove nemam, prestao sam ih koristit odkad sam skužio da je u novim verzijama Ubuntu-a sve teže i teže riješit se launchbara. Compiz koristim.Netko je napisao/la:Imas kakve dockove na desktopu ili neki compositing manager(compiz)?
Uz najbolju volju probao sam, ali neide. Jednostavno je presporo. Probao sam preko recovery mode-a u root shell promptu, ali ne mogu stvarat nove fileove ili kopirat stare jer mi javlja da je read-only file system.Netko je napisao/la:Stavi te stare drivere i daj molimte output od dmesg i sadrzaj /var/log/Xorg.0.log, nakon sto ti pocne stekat/stavec... Ako te previse zeza sistem odi na ctrl+alt+f1 logiraj se i napravi sudo /etc/init.d/gdm stop pa probaj onda izvuc te fileove... Ako neide tako onda restartaj komp pa daj sadrzaj od /var/log/kernel.log.1 i /var/log/Xorg.0.log.old.
Hvala.
Da, napravio sam update kroz update manager(nekih 600mb) u trenutku kad sam maknuo drivere, i prije nego što sam ponovno stavio current.Netko je napisao/la: Ti je sistem updatean?
Ne znam stvarno što se dešava sa sustavom, ali mislim da ću pribjeć reinstall-u. Ionako je bio planiran kada izađe 12.04 jer mi je root particija već pri kraju sa prostorom. Valjda će sve radit kako spada kada ga stavim na novo
Hvala za pomoć!
Test prvoklasne inteligencije sastoji se u sposobnosti istovremenog držanja dviju suprotnih ideja u glavi, a da se pritom zadrži sposobnost funkcioniranja.
Re: Ubuntu random logout
Ali sto je rec da kod iz shareda liba nije pokusao pristupit toj lokaciji? I s time opet problem u driverima... Po ovome ta mi poruka vise nekako i upucuje na to... Sta bi po tebi trebalo znacit "in nvidia_drv.so"? Da je pokusano pristupit memoriskoj lokaciji koja je u address spaceu od shared liba?drade je napisao/la:Izvadak:Netko je napisao/la:Po cemu si siguran u to?Indikacija na nvidia_drv.so postoji, no linija gore kaze da je Xorg pokusao pristupiti memorijskoj lokaciji kojoj nema pravo pristupa (sto je vezano uz nvidia driver), pa mu je kernel lupio samar (naravno, jer je Xorg bezobraznik).[16215.786435] Xorg[1151]: segfault at b4fa9000 ip b48eb33e sp bf92a6d0 error 7 in nvidia_drv.so[b482d000+706000]
Kao sto si naveo u postu prije, Xorg.*.log datoteka bi trebala otkriti vise detalja. Ne odbacujem los driver kao uzrok, jer novo ponasanje OP-ova sustava dolazi nakon instalacije drivera koju ste izvrsili ranije.
E da, i onih par linija iznad te segfault linije govore da je neki error u driverima, samo neznam koji...
@vkrajacic89
Dobro. Mada bi ja to volio rijesit...Probaj samo procitat old fileove iz recovery mode, s live cd-om ili nekako... Ako nisi reinstalirao sistem vec i ako ti se da...
Re: Ubuntu random logout
Opcija 1:
Mozda ce pomoci pri rjesavanju recentnog problema (neresponzivnost sustava), trebalo bi dodati liniju u xorg.conf "Device" sekciju:
Iz Nvidia dokumentacije:
Pokusati s driverima od NVIDIA-e direktno.
Mozda ce pomoci pri rjesavanju recentnog problema (neresponzivnost sustava), trebalo bi dodati liniju u xorg.conf "Device" sekciju:
Ukoliko te opcije uopce nema u navedenoj konfiguracijskoj datoteci, zanemari opciju 1.Option "UseEvents" "false"
Iz Nvidia dokumentacije:
Option "UseEvents" "boolean":
Opcija 2:Enables the use of system events in some cases when the X driver is waiting for the hardware. The X driver can briefly spin through a tight loop when waiting for the hardware. With this option the X driver instead sets an event handler and waits for the hardware through the ‘poll()’ system call.
Default: the use of the events is disabled.This goes from using a "busy" wait by default to a less CPU intensive system call: poll, ppoll - wait for some event on a file descriptor
However, this can cause problems on some hardware so if X starts getting flaky and crashing, set UseEvents back to false.
Pokusati s driverima od NVIDIA-e direktno.
When you're a kid and you wanna go "Weee !", but you ain't got drugs yet ... You hold out for your life, hold on to your little GONADS ... and STRIFE.
-
vkrajacic89
- Postovi: 98
- Pridružen/a: 10 tra 2012, 13:28
- Spol: M
- OS: Arch Linux
- Lokacija: /home/Samobor
- Kontakt:
Re: Ubuntu random logout
Evo uspio sam doć do datoteka preko live cd-a.
Dmesg 1. dio:
Dmesg 1. dio:
Kod: Označi sve
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 (Ubuntu 3.2.0-23.36-generic-pae 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cdee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cdee0000 - 00000000cdee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cdee3000 - 00000000cdef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cdef0000 - 00000000cdf00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ce000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N-VM DH, BIOS ASUS M2N-VM DH ACPI BIOS Revision 1103 05/21/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 4 base 0120000000 mask FFF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f5420] f5420
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 36500000 - 37278000
[ 0.000000] ACPI: RSDP 000f6fb0 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT cdee30c0 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP cdeeb840 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT cdee3240 08581 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS cdee0000 00040
[ 0.000000] ACPI: MCFG cdeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC cdeeb980 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3972MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cdee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1039983
[ 0.000000] free_area_init_node: node 0, pgdat c186b480, node_mem_map f3f00200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7945 pages used for memmap
[ 0.000000] HighMem zone: 803801 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34240 r0 d23104 u1048576
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030254
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-23-generic-pae root=UUID=1431dcef-4005-4647-ad0f-5ead935688fc ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 19922688 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00130000)
[ 0.000000] Memory: 4076408k/4980736k available (5825k kernel code, 83524k reserved, 2850k data, 740k init, 3246984k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1879000 - 0xc1932000 ( 740 kB)
[ 0.000000] .data : 0xc15b04bc - 0xc1878d00 (2850 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15b04bc (5825 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.509 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.01 BogoMIPS (lpj=12054036)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004029] Security Framework initialized
[ 0.004050] AppArmor: AppArmor initialized
[ 0.004052] Yama: becoming mindful.
[ 0.004103] Mount-cache hash table entries: 512
[ 0.004220] Initializing cgroup subsys cpuacct
[ 0.004226] Initializing cgroup subsys memory
[ 0.004233] Initializing cgroup subsys devices
[ 0.004235] Initializing cgroup subsys freezer
[ 0.004238] Initializing cgroup subsys blkio
[ 0.004244] Initializing cgroup subsys perf_event
[ 0.004263] CPU: Physical Processor ID: 0
[ 0.004265] CPU: Processor Core ID: 0
[ 0.004268] mce: CPU supports 5 MCE banks
[ 0.004276] using AMD E400 aware idle routine
[ 0.005904] ACPI: Core revision 20110623
[ 0.015239] ftrace: allocating 26594 entries in 53 pages
[ 0.016066] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016590] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.057544] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f74ca000 soft=f74cc000
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.144120] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144140] Brought up 2 CPUs
[ 0.144142] Total of 2 processors activated (12054.70 BogoMIPS).
[ 0.144770] devtmpfs: initialized
[ 0.144770] EVM: security.selinux
[ 0.144770] EVM: security.SMACK64
[ 0.144770] EVM: security.capability
[ 0.144770] PM: Registering ACPI NVS region at cdee0000 (12288 bytes)
[ 0.144882] print_constraints: dummy:
[ 0.144918] RTC time: 16:26:12, date: 04/16/12
[ 0.144950] NET: Registered protocol family 16
[ 0.144974] Trying to unpack rootfs image as initramfs...
[ 0.145066] EISA bus registered
[ 0.145069] node 0 link 0: io port [7000, ffff]
[ 0.145072] TOM: 00000000d0000000 aka 3328M
[ 0.145074] node 0 link 0: mmio [a0000, bffff]
[ 0.145077] node 0 link 0: mmio [d0000000, efffffff]
[ 0.145080] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.145082] node 0 link 0: mmio [f0000000, f04fffff]
[ 0.145084] TOM2: 0000000130000000 aka 4864M
[ 0.145086] bus: [00, 04] on node 0 link 0
[ 0.145089] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.145090] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.145092] bus: 00 index 2 [mem 0xd0000000-0xf3ffffff]
[ 0.145094] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.145096] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.145108] ACPI: bus type pci registered
[ 0.145165] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.145168] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.145170] PCI: Using MMCONFIG for extended config space
[ 0.145171] PCI: Using configuration type 1 for base access
[ 0.146222] bio: create slab <bio-0> at 0
[ 0.146294] ACPI: Added _OSI(Module Device)
[ 0.146296] ACPI: Added _OSI(Processor Device)
[ 0.146297] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.146299] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.148581] ACPI: EC: Look up EC in DSDT
[ 0.153459] ACPI: Interpreter enabled
[ 0.153465] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.153482] ACPI: Using IOAPIC for interrupt routing
[ 0.158245] ACPI: No dock devices found.
[ 0.158247] HEST: Table not found.
[ 0.158250] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.158759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.159770] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.159772] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.159775] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7f] (ignored)
[ 0.159777] pci_root PNP0A08:00: host bridge window [io 0x7000-0xffff] (ignored)
[ 0.159779] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.159781] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.159783] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xefffffff] (ignored)
[ 0.159786] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[ 0.159808] pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500
[ 0.159973] pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601
[ 0.160022] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[ 0.160032] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.160046] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.160051] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.160077] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.160082] pci 0000:00:01.1: PME# disabled
[ 0.160091] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[ 0.160129] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[ 0.160137] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.160167] pci 0000:00:02.0: supports D1 D2
[ 0.160169] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160172] pci 0000:00:02.0: PME# disabled
[ 0.160182] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[ 0.160191] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.160229] pci 0000:00:02.1: supports D1 D2
[ 0.160230] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160233] pci 0000:00:02.1: PME# disabled
[ 0.160249] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[ 0.160285] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[ 0.160295] pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
[ 0.160332] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.160335] pci 0000:00:05.0: PME# disabled
[ 0.160351] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[ 0.160370] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.160398] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[ 0.160407] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.160411] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
[ 0.160442] pci 0000:00:07.0: supports D1 D2
[ 0.160443] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160447] pci 0000:00:07.0: PME# disabled
[ 0.160458] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[ 0.160465] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 0.160469] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.160473] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 0.160477] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.160481] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
[ 0.160485] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.160510] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
[ 0.160517] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 0.160521] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 0.160525] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 0.160528] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.160532] pci 0000:00:08.1: reg 20: [io 0xc400-0xc40f]
[ 0.160536] pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 0.160566] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[ 0.160590] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160592] pci 0000:00:09.0: PME# disabled
[ 0.160606] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[ 0.160628] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160630] pci 0000:00:0b.0: PME# disabled
[ 0.160641] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[ 0.160664] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160666] pci 0000:00:0c.0: PME# disabled
[ 0.160675] pci 0000:00:0d.0: [10de:03d0] type 0 class 0x000300
[ 0.160681] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.160686] pci 0000:00:0d.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.160691] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.160697] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.160720] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.160736] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.160748] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.160761] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.160780] PCI: peer root bus 00 res updated from pci conf
[ 0.160808] pci 0000:01:06.0: [104c:8023] type 0 class 0x000c00
[ 0.160820] pci 0000:01:06.0: reg 10: [mem 0xfdaff000-0xfdaff7ff]
[ 0.160828] pci 0000:01:06.0: reg 14: [mem 0xfdaf8000-0xfdafbfff]
[ 0.160874] pci 0000:01:06.0: supports D1 D2
[ 0.160876] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.160879] pci 0000:01:06.0: PME# disabled
[ 0.160904] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.160908] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.160911] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.160914] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.160916] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.160918] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.160920] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xf3ffffff] (subtractive decode)
[ 0.160922] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.160925] pci 0000:00:04.0: bridge window [mem 0x130000000-0xfcffffffff] (subtractive decode)
[ 0.160949] pci 0000:02:00.0: [10de:0193] type 0 class 0x000300
[ 0.160957] pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.160964] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.160971] pci 0000:02:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit]
[ 0.160977] pci 0000:02:00.0: reg 24: [io 0xac00-0xac7f]
[ 0.160982] pci 0000:02:00.0: reg 30: [mem 0xf9fe0000-0xf9ffffff pref]
[ 0.161009] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.161014] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.161017] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.161020] pci 0000:00:09.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.161023] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.161052] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.161108] pci 0000:03:00.0: reg 24: [mem 0xfdefe000-0xfdefffff]
[ 0.161117] pci 0000:03:00.0: reg 30: [mem 0xfdee0000-0xfdeeffff pref]
[ 0.161151] pci 0000:03:00.0: PME# supported from D3hot
[ 0.161154] pci 0000:03:00.0: PME# disabled
[ 0.161174] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.161190] pci 0000:03:00.1: reg 10: [io 0x9c00-0x9c07]
[ 0.161199] pci 0000:03:00.1: reg 14: [io 0x9800-0x9803]
[ 0.161209] pci 0000:03:00.1: reg 18: [io 0x9400-0x9407]
[ 0.161218] pci 0000:03:00.1: reg 1c: [io 0x9000-0x9003]
[ 0.161227] pci 0000:03:00.1: reg 20: [io 0x8c00-0x8c0f]
[ 0.161280] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.161289] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.161292] pci 0000:00:0b.0: bridge window [io 0x8000-0x9fff]
[ 0.161294] pci 0000:00:0b.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.161297] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.161314] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.161317] pci 0000:00:0c.0: bridge window [io 0x7000-0x7fff]
[ 0.161319] pci 0000:00:0c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.161322] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.161330] pci_bus 0000:00: on NUMA node 0
[ 0.161332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.161449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.161561] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.161564] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.161566] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.180632] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
[ 0.180672] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.180712] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.180751] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.180790] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.180830] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.180868] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.180909] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 *10 11 14 15)
[ 0.180948] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.180989] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.181029] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.181069] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[ 0.181109] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.181147] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.181188] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.181228] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.181271] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.181310] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.181353] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 0.181424] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.181487] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.181550] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.181612] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.181675] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.181737] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.181800] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.181862] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[ 0.181925] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0
[ 0.181987] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0
[ 0.182050] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
[ 0.182112] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
[ 0.182175] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
[ 0.182240] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0
[ 0.182303] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0
[ 0.182366] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
[ 0.182431] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
[ 0.182494] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
[ 0.182556] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0
[ 0.182657] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=none,locks=none
[ 0.182663] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.182665] vgaarb: loaded
[ 0.182667] vgaarb: bridge control possible 0000:02:00.0
[ 0.182668] vgaarb: no bridge control possible 0000:00:0d.0
[ 0.182778] i2c-core: driver [aat2870] using legacy suspend method
[ 0.182779] i2c-core: driver [aat2870] using legacy resume method
[ 0.182843] SCSI subsystem initialized
[ 0.184188] libata version 3.00 loaded.
[ 0.184188] usbcore: registered new interface driver usbfs
[ 0.184188] usbcore: registered new interface driver hub
[ 0.184188] usbcore: registered new device driver usb
[ 0.184195] PCI: Using ACPI for IRQ routing
[ 0.185553] PCI: pci_cache_line_size set to 64 bytes
[ 0.185609] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.185611] reserve RAM buffer: 00000000cdee0000 - 00000000cfffffff
[ 0.185701] NetLabel: Initializing
[ 0.185702] NetLabel: domain hash size = 128
[ 0.185703] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185713] NetLabel: unlabeled traffic allowed by default
[ 0.192562] AppArmor: AppArmor Filesystem Enabled
[ 0.192591] pnp: PnP ACPI init
[ 0.192606] ACPI: bus type pnp registered
[ 0.193168] pnp 00:00: [bus 00-04]
[ 0.193170] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.193172] pnp 00:00: [io 0x0000-0x03af window]
[ 0.193174] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.193176] pnp 00:00: [io 0x1c00-0x1c7f window]
[ 0.193178] pnp 00:00: [io 0x7000-0xffff window]
[ 0.193180] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.193182] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.193184] pnp 00:00: [mem 0xd0000000-0xefffffff window]
[ 0.193186] pnp 00:00: [mem 0xf4000000-0xfe02ffff window]
[ 0.193253] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.193268] pnp 00:01: [io 0x1000-0x107f]
[ 0.193270] pnp 00:01: [io 0x1080-0x10ff]
[ 0.193272] pnp 00:01: [io 0x1400-0x147f]
[ 0.193273] pnp 00:01: [io 0x1480-0x14ff]
[ 0.193275] pnp 00:01: [io 0x1800-0x187f]
[ 0.193277] pnp 00:01: [io 0x1880-0x18ff]
[ 0.193328] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.193331] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.193333] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.193335] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.193337] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.193342] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.193345] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193407] pnp 00:02: [io 0x0010-0x001f]
[ 0.193408] pnp 00:02: [io 0x0022-0x003f]
[ 0.193410] pnp 00:02: [io 0x0044-0x005f]
[ 0.193412] pnp 00:02: [io 0x0062-0x0063]
[ 0.193413] pnp 00:02: [io 0x0065-0x006f]
[ 0.193415] pnp 00:02: [io 0x0074-0x007f]
[ 0.193417] pnp 00:02: [io 0x0091-0x0093]
[ 0.193418] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.193420] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.193421] pnp 00:02: [io 0x0b78-0x0b7b]
[ 0.193423] pnp 00:02: [io 0x0f78-0x0f7b]
[ 0.193425] pnp 00:02: [io 0x0a78-0x0a7b]
[ 0.193426] pnp 00:02: [io 0x0e78-0x0e7b]
[ 0.193428] pnp 00:02: [io 0x0bbc-0x0bbf]
[ 0.193430] pnp 00:02: [io 0x0fbc-0x0fbf]
[ 0.193431] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.193433] pnp 00:02: [io 0x0294-0x0297]
[ 0.193434] pnp 00:02: [io 0x0800-0x087f]
[ 0.193436] pnp 00:02: [io 0x0290-0x0297]
[ 0.193495] system 00:02: [io 0x0b78-0x0b7b] has been reserved
[ 0.193497] system 00:02: [io 0x0f78-0x0f7b] has been reserved
[ 0.193499] system 00:02: [io 0x0a78-0x0a7b] has been reserved
[ 0.193502] system 00:02: [io 0x0e78-0x0e7b] has been reserved
[ 0.193504] system 00:02: [io 0x0bbc-0x0bbf] has been reserved
[ 0.193506] system 00:02: [io 0x0fbc-0x0fbf] has been reserved
[ 0.193508] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.193510] system 00:02: [io 0x0294-0x0297] has been reserved
[ 0.193513] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.193515] system 00:02: [io 0x0290-0x0297] could not be reserved
[ 0.193517] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193527] pnp 00:03: [dma 4]
[ 0.193529] pnp 00:03: [io 0x0000-0x000f]
[ 0.193530] pnp 00:03: [io 0x0080-0x0090]
[ 0.193532] pnp 00:03: [io 0x0094-0x009f]
[ 0.193534] pnp 00:03: [io 0x00c0-0x00df]
[ 0.193558] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.193566] pnp 00:04: [io 0x0070-0x0073]
[ 0.193579] pnp 00:04: [irq 8]
[ 0.193604] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.193610] pnp 00:05: [io 0x0061]
[ 0.193638] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.193644] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.193652] pnp 00:06: [irq 13]
[ 0.193677] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.193767] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.193769] pnp 00:07: [io 0x03f7]
[ 0.193776] pnp 00:07: [irq 6]
[ 0.193778] pnp 00:07: [dma 2]
[ 0.193814] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.193956] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.193964] pnp 00:08: [irq 4]
[ 0.194016] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.194229] pnp 00:09: [io 0x0378-0x037f]
[ 0.194230] pnp 00:09: [io 0x0778-0x077b]
[ 0.194238] pnp 00:09: [irq 7]
[ 0.194284] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.194841] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[ 0.194898] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.194900] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195022] pnp 00:0b: [mem 0x000d2800-0x000d3fff]
[ 0.195024] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.195026] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.195028] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.195029] pnp 00:0b: [mem 0xcdee0000-0xcdefffff]
[ 0.195031] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[ 0.195033] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.195035] pnp 00:0b: [mem 0x00100000-0xcdedffff]
[ 0.195037] pnp 00:0b: [mem 0xcdef0000-0xcfeeffff]
[ 0.195038] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.195040] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 0.195042] pnp 00:0b: [mem 0xfefff000-0xfeffffff]
[ 0.195044] pnp 00:0b: [mem 0xfff80000-0xfff80fff]
[ 0.195045] pnp 00:0b: [mem 0xfff90000-0xfffbffff]
[ 0.195047] pnp 00:0b: [mem 0xfffed000-0xfffeffff]
[ 0.195111] system 00:0b: [mem 0x000d2800-0x000d3fff] has been reserved
[ 0.195113] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.195116] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.195118] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.195121] system 00:0b: [mem 0xcdee0000-0xcdefffff] could not be reserved
[ 0.195123] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.195126] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.195128] system 00:0b: [mem 0x00100000-0xcdedffff] could not be reserved
[ 0.195130] system 00:0b: [mem 0xcdef0000-0xcfeeffff] could not be reserved
[ 0.195133] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.195135] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.195138] system 00:0b: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.195140] system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.195142] system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.195145] system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.195147] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.195155] pnp: PnP ACPI: found 12 devices
[ 0.195156] ACPI: ACPI bus type pnp unregistered
[ 0.195159] PnPBIOS: Disabled by ACPI PNP
[ 0.231189] Switching to clocksource acpi_pm
[ 0.231431] PCI: max bus depth: 1 pci_try_num: 2
[ 0.231448] pci 0000:00:0d.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[ 0.231451] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.231453] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.231457] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.231460] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 0.231463] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.231466] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.231468] pci 0000:00:09.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.231471] pci 0000:00:09.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.231474] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.231476] pci 0000:00:0b.0: bridge window [io 0x8000-0x9fff]
[ 0.231479] pci 0000:00:0b.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.231482] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.231485] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.231487] pci 0000:00:0c.0: bridge window [io 0x7000-0x7fff]
[ 0.231490] pci 0000:00:0c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.231492] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.231500] pci 0000:00:04.0: setting latency timer to 64
[ 0.231504] pci 0000:00:09.0: setting latency timer to 64
[ 0.231507] pci 0000:00:0b.0: setting latency timer to 64
[ 0.231510] pci 0000:00:0c.0: setting latency timer to 64
[ 0.231513] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.231515] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.231517] pci_bus 0000:00: resource 6 [mem 0xd0000000-0xf3ffffff]
[ 0.231519] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.231521] pci_bus 0000:00: resource 8 [mem 0x130000000-0xfcffffffff]
[ 0.231523] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.231525] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.231528] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[ 0.231530] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.231532] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.231534] pci_bus 0000:01: resource 6 [mem 0xd0000000-0xf3ffffff]
[ 0.231536] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.231538] pci_bus 0000:01: resource 8 [mem 0x130000000-0xfcffffffff]
[ 0.231540] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.231542] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf9ffffff]
[ 0.231544] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.231547] pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
[ 0.231549] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.231551] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.231553] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.231555] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.231557] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.231590] NET: Registered protocol family 2
[ 0.231643] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.231851] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.231851] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.231851] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.231851] TCP reno registered
[ 0.231851] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.231851] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.231851] NET: Registered protocol family 1
[ 0.231851] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.231851] pci 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.304033] pci 0000:00:02.0: PCI INT A disabled
[ 0.304150] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.304159] pci 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.304169] pci 0000:00:02.1: PCI INT B disabled
[ 0.304209] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304254] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304307] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304359] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304466] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304525] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304586] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.304604] pci 0000:02:00.0: Boot video device
[ 0.304611] PCI: CLS 32 bytes, default 64
[ 0.304923] audit: initializing netlink socket (disabled)
[ 0.304931] type=2000 audit(1334593571.300:1): initialized
[ 0.330273] highmem bounce pool size: 64 pages
[ 0.330278] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.347621] VFS: Disk quotas dquot_6.5.2
[ 0.347685] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.348174] fuse init (API version 7.17)
[ 0.348250] msgmni has been set to 1619
[ 0.348520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.348542] io scheduler noop registered
[ 0.348544] io scheduler deadline registered
[ 0.348549] io scheduler cfq registered (default)
[ 0.348660] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.348683] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.348715] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.348731] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.348762] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.348778] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.348833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.348857] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.348992] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.348997] ACPI: Power Button [PWRB]
[ 0.349047] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.349050] ACPI: Power Button [PWRF]
[ 0.349096] ACPI: Fan [FAN] (on)
[ 0.351200] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.351202] ACPI: Thermal Zone [THRM] (40 C)
[ 0.351238] ERST: Table is not found!
[ 0.351239] GHES: HEST is not enabled!
[ 0.351297] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.360166] isapnp: Scanning for PnP cards...
[ 0.371643] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.429498] Freeing initrd memory: 13792k freed
[ 0.712817] isapnp: No Plug & Play device found
[ 0.788471] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.800274] Linux agpgart interface v0.103
[ 0.802019] brd: module loaded
[ 0.802821] loop: module loaded
[ 0.802968] ahci 0000:03:00.0: version 3.0
[ 0.803156] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 0.803171] ahci 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 0.816045] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.816048] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.816053] ahci 0000:03:00.0: setting latency timer to 64
[ 0.816465] scsi0 : ahci
[ 0.816586] scsi1 : ahci
[ 0.816643] ata1: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 16
[ 0.816646] ata2: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 16
[ 0.816745] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.816900] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 0.816910] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 0.816923] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.816929] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.817070] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[ 0.817080] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
[ 0.817092] pata_acpi 0000:00:08.1: setting latency timer to 64
[ 0.817098] pata_acpi 0000:00:08.1: PCI INT B disabled
[ 0.817108] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.817244] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.817247] pata_acpi 0000:03:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.817264] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.817272] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.817628] Fixed MDIO Bus: probed
[ 0.817649] tun: Universal TUN/TAP device driver, 1.6
[ 0.817651] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.817705] PPP generic driver version 2.4.2
[ 0.817819] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.817830] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.817838] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.817841] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.817889] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.817905] ehci_hcd 0000:00:02.1: debug port 1
[ 0.817912] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[ 0.817929] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.828018] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.828148] hub 1-0:1.0: USB hub found
[ 0.828152] hub 1-0:1.0: 10 ports detected
[ 0.828231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.828241] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.828249] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.828251] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.828294] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.828317] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.886121] hub 2-0:1.0: USB hub found
[ 0.886126] hub 2-0:1.0: 10 ports detected
[ 0.886194] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.886243] usbcore: registered new interface driver libusual
[ 0.886289] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.889156] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.889162] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.889304] mousedev: PS/2 mouse device common for all mice
[ 0.889476] rtc_cmos 00:04: RTC can wake from S4
[ 0.889609] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.889642] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.889690] device-mapper: uevent: version 1.0.3
[ 0.889768] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.889801] EISA: Probing bus 0 at eisa.0
[ 0.889803] EISA: Cannot allocate resource for mainboard
[ 0.889805] Cannot allocate resource for EISA slot 1
[ 0.889807] Cannot allocate resource for EISA slot 2
[ 0.889809] Cannot allocate resource for EISA slot 3
[ 0.889811] Cannot allocate resource for EISA slot 4
[ 0.889812] Cannot allocate resource for EISA slot 5
[ 0.889814] Cannot allocate resource for EISA slot 6
[ 0.889816] Cannot allocate resource for EISA slot 7
[ 0.889818] Cannot allocate resource for EISA slot 8
[ 0.889819] EISA: Detected 0 cards.
[ 0.889828] cpufreq-nforce2: No nForce2 chipset.
[ 0.889830] cpuidle: using governor ladder
[ 0.889832] cpuidle: using governor menu
[ 0.889834] EFI Variables Facility v0.08 2004-May-17
[ 0.890024] TCP cubic registered
[ 0.890124] NET: Registered protocol family 10
[ 0.890565] NET: Registered protocol family 17
[ 0.890577] Registering the dns_resolver key type
[ 0.890594] Using IPI No-Shortcut mode
[ 0.890722] PM: Hibernation image not present or could not be loaded.
[ 0.890731] registered taskstats version 1
[ 0.904610] Magic number: 8:261:439
[ 0.904706] rtc_cmos 00:04: setting system clock to 2012-04-16 16:26:12 UTC (1334593572)
[ 0.904714] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
[ 0.904724] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.904725] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.904738] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.904739] EDD information not available.
[ 1.136044] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.136073] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.136152] Freeing unused kernel memory: 740k freed
[ 1.136482] Write protecting the kernel text: 5828k
[ 1.136497] Write protecting the kernel read-only data: 2376k
[ 1.136499] NX-protecting the kernel data: 4412k
[ 1.140037] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.149535] udevd[89]: starting version 175
[ 1.213286] pata_amd 0000:00:06.0: version 0.4.1
[ 1.213329] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.215299] scsi2 : pata_amd
[ 1.215700] scsi3 : pata_amd
[ 1.216146] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.216149] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.217313] pata_jmicron 0000:03:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 1.217351] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.217611] sata_nv 0000:00:08.0: version 3.5
[ 1.217622] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 1.217665] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.219809] scsi4 : pata_jmicron
[ 1.220132] scsi6 : pata_jmicron
[ 1.220175] ata5: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16
[ 1.220177] ata6: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16
[ 1.222346] scsi5 : sata_nv
[ 1.222487] scsi7 : sata_nv
[ 1.222609] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20
[ 1.222611] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20
[ 1.222643] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
[ 1.222690] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.226967] scsi8 : sata_nv
[ 1.228095] firewire_ohci 0000:01:06.0: BAR 0: set to [mem 0xfdaff000-0xfdaff7ff] (PCI address [0xfdaff000-0xfdaff7ff])
[ 1.228101] firewire_ohci 0000:01:06.0: BAR 1: set to [mem 0xfdaf8000-0xfdafbfff] (PCI address [0xfdaf8000-0xfdafbfff])
[ 1.228106] firewire_ohci 0000:01:06.0: enabling device (0000 -> 0002)
[ 1.228250] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.228255] firewire_ohci 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 1.228261] firewire_ohci 0000:01:06.0: setting latency timer to 64
[ 1.228826] scsi9 : sata_nv
[ 1.228936] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21
[ 1.228939] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21
[ 1.228976] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.229087] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 1.229090] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 1.229093] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.237537] Floppy drive(s): fd0 is 1.44M
[ 1.256040] FDC 0 is a post-1991 82077
[ 1.282497] Initializing USB Mass Storage driver...
[ 1.282581] scsi10 : usb-storage 1-1:1.0
[ 1.282648] usbcore: registered new interface driver usb-storage
[ 1.282650] USB Mass Storage support registered.
[ 1.282929] usbcore: registered new interface driver uas
[ 1.284074] firewire_ohci: Added fw-ohci device 0000:01:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.380291] ata3.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 1.380297] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 1.396225] ata3.00: configured for UDMA/33
[ 1.400023] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 1.403703] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 1.403705] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.403849] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.403968] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.404089] ata4: port disabled--ignoring
[ 1.542219] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.560031] usb 1-5: new high-speed USB device number 5 using ehci_hcd
[ 1.696038] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.704125] ata9.00: ATAPI: PIONEER DVD-RW DVR-212, 1.21, max UDMA/66
[ 1.720122] ata9.00: configured for UDMA/66
[ 1.752619] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:1b:fc:c2:b3:69
[ 1.752622] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.784107] firewire_core: created device fw0: GUID 0011d800015c236b, S400
[ 2.008021] usb 2-3: new full-speed USB device number 2 using ohci_hcd
[ 2.036038] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.052765] ata8.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133
[ 2.052768] ata8.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.068580] ata8.00: configured for UDMA/133
[ 2.068700] scsi 7:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[ 2.068823] sd 7:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Test prvoklasne inteligencije sastoji se u sposobnosti istovremenog držanja dviju suprotnih ideja u glavi, a da se pritom zadrži sposobnost funkcioniranja.
-
vkrajacic89
- Postovi: 98
- Pridružen/a: 10 tra 2012, 13:28
- Spol: M
- OS: Arch Linux
- Lokacija: /home/Samobor
- Kontakt:
Re: Ubuntu random logout
Dmesg 2. dio:
Xorg.0.log:
Xorg.0.log.old
Da vas pitam usput kad već pratite ovaj topic.
- Kada instaliram novi Ubuntu, da li on stavlja neke default video drivere? Ako da, da li ih moram maknut prije nego što stavim drivere od Nvidie?
- Trenutno koristim dual boot sa Windowsima 7, s time da koristim boot loader od Windowsa. Setup sam sredio prema ovom linku:
Mislio sam sada stavit Grub boot loader. Jel postoji neki tutorial za takav setup. Da li se onda prvo instalirava Ubuntu pa na to Windowsi? Čuo sam da ljudi to ne rade jer bilo kakav upgrade od Windowsa može overridat boot sektor. Međutim ja bi stavio Windows XP sa SP3, koji sumnjam da će primat nove nadogradnje.
Kod: Označi sve
[ 2.068843] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 2.068863] sd 7:0:0:0: [sda] Write Protect is off
[ 2.068865] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.068891] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.075800] scsi 8:0:0:0: CD-ROM PIONEER DVD-RW DVR-212 1.21 PQ: 0 ANSI: 5
[ 2.082085] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.082198] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 2.082301] sr 8:0:0:0: Attached scsi generic sg2 type 5
[ 2.108952] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
[ 2.109495] sd 7:0:0:0: [sda] Attached SCSI disk
[ 2.238819] usbcore: registered new interface driver usbhid
[ 2.238822] usbhid: USB HID core driver
[ 2.281222] scsi 10:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS
[ 2.281707] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 2.282211] sd 10:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 2.282708] sd 10:0:0:0: [sdb] Write Protect is off
[ 2.282710] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2.283208] sd 10:0:0:0: [sdb] No Caching mode page present
[ 2.283210] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 2.285833] sd 10:0:0:0: [sdb] No Caching mode page present
[ 2.285834] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 2.286369] sdb: sdb1
[ 2.288333] sd 10:0:0:0: [sdb] No Caching mode page present
[ 2.288335] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 2.288337] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 2.402238] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.536030] usb 2-4: new low-speed USB device number 3 using ohci_hcd
[ 2.763395] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2
[ 2.763504] generic-usb 0003:046D:C043.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4/input0
[ 2.893182] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 19.508891] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.522223] udevd[388]: starting version 175
[ 19.590703] Adding 3905532k swap on /dev/sda6. Priority:-1 extents:1 across:3905532k
[ 19.622137] lp: driver loaded but no devices found
[ 19.625822] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 19.625826] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.625890] i2c i2c-0: nForce2 SMBus adapter at 0x1c40
[ 19.641382] type=1400 audit(1334586391.234:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=501 comm="apparmor_parser"
[ 19.641726] type=1400 audit(1334586391.234:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=501 comm="apparmor_parser"
[ 19.641926] type=1400 audit(1334586391.234:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=501 comm="apparmor_parser"
[ 19.781037] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 19.781044] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 19.781047] hda_intel: Disabling MSI
[ 19.781069] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 19.813233] parport_pc 00:09: reported by Plug and Play ACPI
[ 19.813285] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.855418] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-3/input2
[ 19.862805] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:046D:C52B.0003/input/input3
[ 19.863120] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:02.0-3:1
[ 19.885440] cfg80211: Calling CRDA to update world regulatory domain
[ 19.898259] lp0: using parport0 (interrupt-driven).
[ 20.118900] ppdev: user-space parallel port driver
[ 20.122075] cfg80211: World regulatory domain updated:
[ 20.122078] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.122081] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.122083] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.122086] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.122088] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.122090] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241246] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241251] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241253] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241256] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241258] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241260] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241262] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241264] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241266] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241269] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241270] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241273] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241275] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241277] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241279] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241281] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241283] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241286] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241288] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241290] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241292] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241294] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.241296] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241298] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.241300] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241303] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.241305] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 20.241307] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.243768] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.244300] ieee80211 phy0: hwaddr 00:15:af:1a:45:83, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 20.255085] rtl8187: Customer ID is 0x00
[ 20.255116] Registered led device: rtl8187-phy0::radio
[ 20.255137] Registered led device: rtl8187-phy0::tx
[ 20.255168] Registered led device: rtl8187-phy0::rx
[ 20.256075] rtl8187: wireless switch is on
[ 20.256493] usbcore: registered new interface driver rtl8187
[ 20.491684] nvidia: module license 'NVIDIA' taints kernel.
[ 20.491688] Disabling lock debugging due to kernel taint
[ 20.954204] hda_codec: AD1988: BIOS auto-probing.
[ 21.032605] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 21.032746] nvidia 0000:00:0d.0: enabling device (0000 -> 0002)
[ 21.032939] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 21.032943] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, low) -> IRQ 23
[ 21.032950] nvidia 0000:00:0d.0: setting latency timer to 64
[ 21.032953] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=none
[ 21.033274] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 21.033277] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 21.033281] nvidia 0000:02:00.0: setting latency timer to 64
[ 21.033283] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.033456] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
[ 21.288904] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 21.582472] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 21.927553] init: udev-fallback-graphics main process (970) terminated with status 1
[ 22.735706] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 24.114016] init: failsafe main process (1009) killed by TERM signal
[ 24.178294] Bluetooth: Core ver 2.16
[ 24.178314] NET: Registered protocol family 31
[ 24.178315] Bluetooth: HCI device and connection manager initialized
[ 24.178318] Bluetooth: HCI socket layer initialized
[ 24.178320] Bluetooth: L2CAP socket layer initialized
[ 24.178325] Bluetooth: SCO socket layer initialized
[ 24.197340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.197344] Bluetooth: BNEP filters: protocol multicast
[ 24.219575] type=1400 audit(1334586395.810:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1083 comm="apparmor_parser"
[ 24.219988] type=1400 audit(1334586395.810:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1083 comm="apparmor_parser"
[ 24.248053] Bluetooth: RFCOMM TTY layer initialized
[ 24.248059] Bluetooth: RFCOMM socket layer initialized
[ 24.248061] Bluetooth: RFCOMM ver 1.11
[ 24.262670] type=1400 audit(1334586395.854:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1110 comm="apparmor_parser"
[ 24.263111] type=1400 audit(1334586395.854:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1110 comm="apparmor_parser"
[ 24.263315] type=1400 audit(1334586395.854:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1110 comm="apparmor_parser"
[ 24.264553] type=1400 audit(1334586395.858:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1109 comm="apparmor_parser"
[ 24.275470] type=1400 audit(1334586395.866:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1111 comm="apparmor_parser"
[ 24.313015] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.317282] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[ 24.469674] vboxdrv: Found 2 processor cores.
[ 24.469787] vboxdrv: fAsync=1 offMin=0xe4135 offMax=0xe4135
[ 24.469847] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 24.469849] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 24.480867] vboxpci: IOMMU not found (not registered)
Kod: Označi sve
[ 24.459]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 24.459] X Protocol Version 11, Revision 0
[ 24.460] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[ 24.460] Current Operating System: Linux Vjekoslav-Ubuntu 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686
[ 24.460] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-23-generic-pae root=UUID=1431dcef-4005-4647-ad0f-5ead935688fc ro quiet splash
[ 24.460] Build Date: 04 April 2012 11:58:38PM
[ 24.460] xorg-server 2:1.11.4-0ubuntu10 (For technical support please see http://www.ubuntu.com/support)
[ 24.460] Current version of pixman: 0.24.4
[ 24.460] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.460] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.460] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 16 16:26:36 2012
[ 24.460] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.460] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.460] (==) ServerLayout "Layout0"
[ 24.460] (**) |-->Screen "Screen0" (0)
[ 24.460] (**) | |-->Monitor "Monitor0"
[ 24.460] (**) | |-->Device "Device0"
[ 24.460] (**) |-->Input Device "Keyboard0"
[ 24.460] (**) |-->Input Device "Mouse0"
[ 24.460] (==) Automatically adding devices
[ 24.460] (==) Automatically enabling devices
[ 24.461] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 24.461] Entry deleted from font path.
[ 24.461] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 24.461] Entry deleted from font path.
[ 24.461] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 24.461] Entry deleted from font path.
[ 24.461] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 24.461] Entry deleted from font path.
[ 24.461] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 24.461] Entry deleted from font path.
[ 24.461] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 24.461] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 24.461] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24.461] (WW) Disabling Keyboard0
[ 24.461] (WW) Disabling Mouse0
[ 24.461] (II) Loader magic: 0xb774c5a0
[ 24.461] (II) Module ABI versions:
[ 24.461] X.Org ANSI C Emulation: 0.4
[ 24.461] X.Org Video Driver: 11.0
[ 24.461] X.Org XInput driver : 16.0
[ 24.461] X.Org Server Extension : 6.0
[ 24.461] (--) PCI: (0:0:13:0) 10de:03d0:1043:8234 rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 24.461] (--) PCI:*(0:2:0:0) 10de:0193:1acc:0842 rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 24.462] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24.462] (II) "extmod" will be loaded by default.
[ 24.462] (II) "dbe" will be loaded by default.
[ 24.462] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 24.462] (II) "record" will be loaded by default.
[ 24.462] (II) "dri" will be loaded by default.
[ 24.462] (II) "dri2" will be loaded by default.
[ 24.462] (II) LoadModule: "glx"
[ 24.494] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[ 25.421] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.421] compiled for 4.0.2, module version = 1.0.0
[ 25.421] Module class: X.Org Server Extension
[ 25.421] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:49:54 PDT 2012
[ 25.421] (II) Loading extension GLX
[ 25.421] (II) LoadModule: "extmod"
[ 25.431] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 25.431] (II) Module extmod: vendor="X.Org Foundation"
[ 25.431] compiled for 1.11.3, module version = 1.0.0
[ 25.431] Module class: X.Org Server Extension
[ 25.431] ABI class: X.Org Server Extension, version 6.0
[ 25.431] (II) Loading extension MIT-SCREEN-SAVER
[ 25.431] (II) Loading extension XFree86-VidModeExtension
[ 25.431] (II) Loading extension XFree86-DGA
[ 25.431] (II) Loading extension DPMS
[ 25.431] (II) Loading extension XVideo
[ 25.431] (II) Loading extension XVideo-MotionCompensation
[ 25.431] (II) Loading extension X-Resource
[ 25.431] (II) LoadModule: "dbe"
[ 25.431] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 25.431] (II) Module dbe: vendor="X.Org Foundation"
[ 25.431] compiled for 1.11.3, module version = 1.0.0
[ 25.431] Module class: X.Org Server Extension
[ 25.431] ABI class: X.Org Server Extension, version 6.0
[ 25.431] (II) Loading extension DOUBLE-BUFFER
[ 25.431] (II) LoadModule: "record"
[ 25.431] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 25.431] (II) Module record: vendor="X.Org Foundation"
[ 25.431] compiled for 1.11.3, module version = 1.13.0
[ 25.432] Module class: X.Org Server Extension
[ 25.432] ABI class: X.Org Server Extension, version 6.0
[ 25.432] (II) Loading extension RECORD
[ 25.432] (II) LoadModule: "dri"
[ 25.432] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 25.432] (II) Module dri: vendor="X.Org Foundation"
[ 25.432] compiled for 1.11.3, module version = 1.0.0
[ 25.432] ABI class: X.Org Server Extension, version 6.0
[ 25.432] (II) Loading extension XFree86-DRI
[ 25.432] (II) LoadModule: "dri2"
[ 25.432] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.432] (II) Module dri2: vendor="X.Org Foundation"
[ 25.432] compiled for 1.11.3, module version = 1.2.0
[ 25.432] ABI class: X.Org Server Extension, version 6.0
[ 25.432] (II) Loading extension DRI2
[ 25.432] (II) LoadModule: "nvidia"
[ 25.432] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 25.521] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 25.521] compiled for 4.0.2, module version = 1.0.0
[ 25.521] Module class: X.Org Video Driver
[ 25.663] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:29:50 PDT 2012
[ 25.669] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 25.670] (++) using VT number 7
[ 25.673] (II) Loading sub module "fb"
[ 25.673] (II) LoadModule: "fb"
[ 25.673] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.673] (II) Module fb: vendor="X.Org Foundation"
[ 25.673] compiled for 1.11.3, module version = 1.0.0
[ 25.673] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.673] (II) Loading sub module "wfb"
[ 25.673] (II) LoadModule: "wfb"
[ 25.673] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 25.686] (II) Module wfb: vendor="X.Org Foundation"
[ 25.686] compiled for 1.11.3, module version = 1.0.0
[ 25.686] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.686] (II) Loading sub module "ramdac"
[ 25.686] (II) LoadModule: "ramdac"
[ 25.686] (II) Module "ramdac" already built-in
[ 25.689] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 25.689] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 25.689] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.699] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 25.699] (==) NVIDIA(0): RGB weight 888
[ 25.699] (==) NVIDIA(0): Default visual is TrueColor
[ 25.699] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 25.699] (**) NVIDIA(0): Enabling 2D acceleration
[ 27.467] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 27.467] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 27.474] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:2:0:0 (GPU-0)
[ 27.474] (--) NVIDIA(0): Memory: 327680 kBytes
[ 27.474] (--) NVIDIA(0): VideoBIOS: 60.80.18.00.02
[ 27.474] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 27.474] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 27.481] (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:2:0:0
[ 27.481] (--) NVIDIA(0): Samsung SyncMaster (CRT-1)
[ 27.481] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 27.553] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.553] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 27.553] (**) NVIDIA(0): has been enabled on all display devices.)
[ 27.563] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 27.563] (==) NVIDIA(0):
[ 27.563] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 27.563] (==) NVIDIA(0): will be used as the requested mode.
[ 27.563] (==) NVIDIA(0):
[ 27.563] (II) NVIDIA(0): Validated modes:
[ 27.563] (II) NVIDIA(0): "nvidia-auto-select"
[ 27.563] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 27.591] (--) NVIDIA(0): DPI set to (89, 84); computed from "UseEdidDpi" X config
[ 27.591] (--) NVIDIA(0): option
[ 27.591] (--) Depth 24 pixmap format is 32 bpp
[ 28.011] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce 6150SE nForce 430 (C61) at PCI:0:13:0
[ 28.011] (II) NVIDIA(GPU-1): (GPU-1)
[ 28.011] (--) NVIDIA(GPU-1): Memory: 262144 kBytes
[ 28.011] (--) NVIDIA(GPU-1): VideoBIOS: 05.61.32.14.02
[ 28.011] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
[ 28.011] (--) NVIDIA(GPU-1): Connected display device(s) on GeForce 6150SE nForce 430 at
[ 28.011] (--) NVIDIA(GPU-1): PCI:0:13:0
[ 28.011] (--) NVIDIA(GPU-1): none
[ 28.012] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 28.018] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 28.068] (II) Loading extension NV-GLX
[ 28.094] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 28.094] (==) NVIDIA(0): Backing store disabled
[ 28.094] (==) NVIDIA(0): Silken mouse enabled
[ 28.094] (**) NVIDIA(0): DPMS enabled
[ 28.095] (II) Loading extension NV-CONTROL
[ 28.095] (II) Loading extension XINERAMA
[ 28.095] (II) Loading sub module "dri2"
[ 28.095] (II) LoadModule: "dri2"
[ 28.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.095] (II) Module dri2: vendor="X.Org Foundation"
[ 28.095] compiled for 1.11.3, module version = 1.2.0
[ 28.095] ABI class: X.Org Server Extension, version 6.0
[ 28.095] (II) NVIDIA(0): [DRI2] Setup complete
[ 28.095] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 28.095] (==) RandR enabled
[ 28.095] (II) Initializing built-in extension Generic Event Extension
[ 28.095] (II) Initializing built-in extension SHAPE
[ 28.095] (II) Initializing built-in extension MIT-SHM
[ 28.095] (II) Initializing built-in extension XInputExtension
[ 28.095] (II) Initializing built-in extension XTEST
[ 28.095] (II) Initializing built-in extension BIG-REQUESTS
[ 28.095] (II) Initializing built-in extension SYNC
[ 28.095] (II) Initializing built-in extension XKEYBOARD
[ 28.095] (II) Initializing built-in extension XC-MISC
[ 28.095] (II) Initializing built-in extension SECURITY
[ 28.095] (II) Initializing built-in extension XINERAMA
[ 28.095] (II) Initializing built-in extension XFIXES
[ 28.095] (II) Initializing built-in extension RENDER
[ 28.095] (II) Initializing built-in extension RANDR
[ 28.095] (II) Initializing built-in extension COMPOSITE
[ 28.095] (II) Initializing built-in extension DAMAGE
[ 28.095] (II) Initializing extension GLX
[ 28.121] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 28.124] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 28.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.124] (II) LoadModule: "evdev"
[ 28.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.124] (II) Module evdev: vendor="X.Org Foundation"
[ 28.124] compiled for 1.11.3, module version = 2.7.0
[ 28.124] Module class: X.Org XInput Driver
[ 28.124] ABI class: X.Org XInput driver, version 16.0
[ 28.124] (II) Using input driver 'evdev' for 'Power Button'
[ 28.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.124] (**) Power Button: always reports core events
[ 28.124] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 28.124] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.124] (--) evdev: Power Button: Found keys
[ 28.124] (II) evdev: Power Button: Configuring as keyboard
[ 28.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 28.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.124] (**) Option "xkb_rules" "evdev"
[ 28.124] (**) Option "xkb_model" "pc105"
[ 28.125] (**) Option "xkb_layout" "us"
[ 28.125] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 28.125] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.125] (II) Using input driver 'evdev' for 'Power Button'
[ 28.125] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.125] (**) Power Button: always reports core events
[ 28.125] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 28.125] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.125] (--) evdev: Power Button: Found keys
[ 28.125] (II) evdev: Power Button: Configuring as keyboard
[ 28.125] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 28.125] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 28.125] (**) Option "xkb_rules" "evdev"
[ 28.125] (**) Option "xkb_model" "pc105"
[ 28.125] (**) Option "xkb_layout" "us"
[ 28.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event3)
[ 28.126] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[ 28.126] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[ 28.126] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.126] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[ 28.126] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event3"
[ 28.126] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[ 28.126] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[ 28.126] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[ 28.126] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[ 28.126] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[ 28.126] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[ 28.126] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[ 28.126] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[ 28.126] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[ 28.126] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[ 28.126] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[ 28.126] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[ 28.126] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.2/0003:046D:C52B.0003/input/input3/event3"
[ 28.126] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 8)
[ 28.126] (**) Option "xkb_rules" "evdev"
[ 28.126] (**) Option "xkb_model" "pc105"
[ 28.126] (**) Option "xkb_layout" "us"
[ 28.126] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[ 28.126] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[ 28.126] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[ 28.126] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[ 28.127] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[ 28.127] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
[ 28.127] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
[ 28.127] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 28.127] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 28.127] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.127] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 28.127] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
[ 28.127] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc043
[ 28.127] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 28.127] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 28.127] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 28.127] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 28.127] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 28.127] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 28.127] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 28.127] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2/event2"
[ 28.127] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 28.127] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 28.127] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 28.127] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 28.127] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 28.127] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 28.127] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 28.127] (II) No input driver specified, ignoring this device.
[ 28.127] (II) This device may have been added with another device file.
[ 31.985] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BE4B0CF82C0398622D28E697AC7E6CAD5A4E5EB.xkm
Kod: Označi sve
[ 26.104]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 26.104] X Protocol Version 11, Revision 0
[ 26.104] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[ 26.104] Current Operating System: Linux Vjekoslav-Ubuntu 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686
[ 26.104] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-23-generic-pae root=UUID=1431dcef-4005-4647-ad0f-5ead935688fc ro quiet splash vt.handoff=7
[ 26.104] Build Date: 04 April 2012 11:58:38PM
[ 26.104] xorg-server 2:1.11.4-0ubuntu10 (For technical support please see http://www.ubuntu.com/support)
[ 26.104] Current version of pixman: 0.24.4
[ 26.104] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.104] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.104] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 16 06:16:58 2012
[ 26.104] (==) Using config file: "/etc/X11/xorg.conf"
[ 26.104] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.104] (==) ServerLayout "Layout0"
[ 26.104] (**) |-->Screen "Screen0" (0)
[ 26.104] (**) | |-->Monitor "Monitor0"
[ 26.104] (**) | |-->Device "Device0"
[ 26.105] (**) |-->Input Device "Keyboard0"
[ 26.105] (**) |-->Input Device "Mouse0"
[ 26.105] (==) Automatically adding devices
[ 26.105] (==) Automatically enabling devices
[ 26.105] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 26.105] Entry deleted from font path.
[ 26.105] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 26.105] Entry deleted from font path.
[ 26.105] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 26.105] Entry deleted from font path.
[ 26.105] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 26.105] Entry deleted from font path.
[ 26.105] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 26.105] Entry deleted from font path.
[ 26.105] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 26.105] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 26.105] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 26.105] (WW) Disabling Keyboard0
[ 26.105] (WW) Disabling Mouse0
[ 26.105] (II) Loader magic: 0xb77ff5a0
[ 26.105] (II) Module ABI versions:
[ 26.105] X.Org ANSI C Emulation: 0.4
[ 26.105] X.Org Video Driver: 11.0
[ 26.105] X.Org XInput driver : 16.0
[ 26.105] X.Org Server Extension : 6.0
[ 26.105] (--) PCI: (0:0:13:0) 10de:03d0:1043:8234 rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 26.105] (--) PCI:*(0:2:0:0) 10de:0193:1acc:0842 rev 162, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 26.106] (II) Open ACPI successful (/var/run/acpid.socket)
[ 26.106] (II) "extmod" will be loaded by default.
[ 26.106] (II) "dbe" will be loaded by default.
[ 26.106] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 26.106] (II) "record" will be loaded by default.
[ 26.106] (II) "dri" will be loaded by default.
[ 26.106] (II) "dri2" will be loaded by default.
[ 26.106] (II) LoadModule: "glx"
[ 26.127] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[ 27.088] (II) Module glx: vendor="NVIDIA Corporation"
[ 27.088] compiled for 4.0.2, module version = 1.0.0
[ 27.088] Module class: X.Org Server Extension
[ 27.088] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:49:54 PDT 2012
[ 27.088] (II) Loading extension GLX
[ 27.088] (II) LoadModule: "extmod"
[ 27.098] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 27.098] (II) Module extmod: vendor="X.Org Foundation"
[ 27.098] compiled for 1.11.3, module version = 1.0.0
[ 27.098] Module class: X.Org Server Extension
[ 27.098] ABI class: X.Org Server Extension, version 6.0
[ 27.098] (II) Loading extension MIT-SCREEN-SAVER
[ 27.098] (II) Loading extension XFree86-VidModeExtension
[ 27.098] (II) Loading extension XFree86-DGA
[ 27.098] (II) Loading extension DPMS
[ 27.098] (II) Loading extension XVideo
[ 27.098] (II) Loading extension XVideo-MotionCompensation
[ 27.098] (II) Loading extension X-Resource
[ 27.098] (II) LoadModule: "dbe"
[ 27.098] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 27.098] (II) Module dbe: vendor="X.Org Foundation"
[ 27.098] compiled for 1.11.3, module version = 1.0.0
[ 27.098] Module class: X.Org Server Extension
[ 27.098] ABI class: X.Org Server Extension, version 6.0
[ 27.098] (II) Loading extension DOUBLE-BUFFER
[ 27.098] (II) LoadModule: "record"
[ 27.098] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 27.098] (II) Module record: vendor="X.Org Foundation"
[ 27.098] compiled for 1.11.3, module version = 1.13.0
[ 27.098] Module class: X.Org Server Extension
[ 27.099] ABI class: X.Org Server Extension, version 6.0
[ 27.099] (II) Loading extension RECORD
[ 27.099] (II) LoadModule: "dri"
[ 27.099] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.099] (II) Module dri: vendor="X.Org Foundation"
[ 27.099] compiled for 1.11.3, module version = 1.0.0
[ 27.099] ABI class: X.Org Server Extension, version 6.0
[ 27.099] (II) Loading extension XFree86-DRI
[ 27.099] (II) LoadModule: "dri2"
[ 27.099] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.099] (II) Module dri2: vendor="X.Org Foundation"
[ 27.099] compiled for 1.11.3, module version = 1.2.0
[ 27.099] ABI class: X.Org Server Extension, version 6.0
[ 27.099] (II) Loading extension DRI2
[ 27.099] (II) LoadModule: "nvidia"
[ 27.099] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 27.156] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.156] compiled for 4.0.2, module version = 1.0.0
[ 27.156] Module class: X.Org Video Driver
[ 27.180] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:29:50 PDT 2012
[ 27.186] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 27.191] (++) using VT number 7
[ 27.192] (II) Loading sub module "fb"
[ 27.192] (II) LoadModule: "fb"
[ 27.192] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.192] (II) Module fb: vendor="X.Org Foundation"
[ 27.192] compiled for 1.11.3, module version = 1.0.0
[ 27.192] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.192] (II) Loading sub module "wfb"
[ 27.192] (II) LoadModule: "wfb"
[ 27.192] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.203] (II) Module wfb: vendor="X.Org Foundation"
[ 27.203] compiled for 1.11.3, module version = 1.0.0
[ 27.203] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.203] (II) Loading sub module "ramdac"
[ 27.203] (II) LoadModule: "ramdac"
[ 27.203] (II) Module "ramdac" already built-in
[ 27.206] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 27.206] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.206] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.220] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 27.220] (==) NVIDIA(0): RGB weight 888
[ 27.220] (==) NVIDIA(0): Default visual is TrueColor
[ 27.221] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.221] (**) NVIDIA(0): Enabling 2D acceleration
[ 28.849] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 28.849] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 28.852] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:2:0:0 (GPU-0)
[ 28.852] (--) NVIDIA(0): Memory: 327680 kBytes
[ 28.852] (--) NVIDIA(0): VideoBIOS: 60.80.18.00.02
[ 28.852] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 28.852] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 28.855] (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:2:0:0
[ 28.855] (--) NVIDIA(0): Samsung SyncMaster (CRT-1)
[ 28.855] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 28.935] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 28.935] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 28.935] (**) NVIDIA(0): has been enabled on all display devices.)
[ 28.945] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 28.945] (==) NVIDIA(0):
[ 28.945] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 28.945] (==) NVIDIA(0): will be used as the requested mode.
[ 28.945] (==) NVIDIA(0):
[ 28.945] (II) NVIDIA(0): Validated modes:
[ 28.945] (II) NVIDIA(0): "nvidia-auto-select"
[ 28.945] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 28.968] (--) NVIDIA(0): DPI set to (89, 84); computed from "UseEdidDpi" X config
[ 28.968] (--) NVIDIA(0): option
[ 28.968] (--) Depth 24 pixmap format is 32 bpp
[ 29.384] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce 6150SE nForce 430 (C61) at PCI:0:13:0
[ 29.384] (II) NVIDIA(GPU-1): (GPU-1)
[ 29.384] (--) NVIDIA(GPU-1): Memory: 262144 kBytes
[ 29.384] (--) NVIDIA(GPU-1): VideoBIOS: 05.61.32.14.02
[ 29.384] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
[ 29.384] (--) NVIDIA(GPU-1): Connected display device(s) on GeForce 6150SE nForce 430 at
[ 29.384] (--) NVIDIA(GPU-1): PCI:0:13:0
[ 29.384] (--) NVIDIA(GPU-1): none
[ 29.385] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 29.391] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 29.430] (II) Loading extension NV-GLX
[ 29.467] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 29.468] (==) NVIDIA(0): Backing store disabled
[ 29.468] (==) NVIDIA(0): Silken mouse enabled
[ 29.468] (**) NVIDIA(0): DPMS enabled
[ 29.468] (II) Loading extension NV-CONTROL
[ 29.468] (II) Loading extension XINERAMA
[ 29.468] (II) Loading sub module "dri2"
[ 29.468] (II) LoadModule: "dri2"
[ 29.468] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.468] (II) Module dri2: vendor="X.Org Foundation"
[ 29.469] compiled for 1.11.3, module version = 1.2.0
[ 29.469] ABI class: X.Org Server Extension, version 6.0
[ 29.469] (II) NVIDIA(0): [DRI2] Setup complete
[ 29.469] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 29.469] (==) RandR enabled
[ 29.469] (II) Initializing built-in extension Generic Event Extension
[ 29.469] (II) Initializing built-in extension SHAPE
[ 29.469] (II) Initializing built-in extension MIT-SHM
[ 29.469] (II) Initializing built-in extension XInputExtension
[ 29.469] (II) Initializing built-in extension XTEST
[ 29.469] (II) Initializing built-in extension BIG-REQUESTS
[ 29.469] (II) Initializing built-in extension SYNC
[ 29.469] (II) Initializing built-in extension XKEYBOARD
[ 29.469] (II) Initializing built-in extension XC-MISC
[ 29.469] (II) Initializing built-in extension SECURITY
[ 29.469] (II) Initializing built-in extension XINERAMA
[ 29.469] (II) Initializing built-in extension XFIXES
[ 29.469] (II) Initializing built-in extension RENDER
[ 29.469] (II) Initializing built-in extension RANDR
[ 29.469] (II) Initializing built-in extension COMPOSITE
[ 29.469] (II) Initializing built-in extension DAMAGE
[ 29.469] (II) Initializing extension GLX
[ 29.494] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 29.497] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 29.497] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.497] (II) LoadModule: "evdev"
[ 29.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.497] (II) Module evdev: vendor="X.Org Foundation"
[ 29.497] compiled for 1.11.3, module version = 2.7.0
[ 29.497] Module class: X.Org XInput Driver
[ 29.497] ABI class: X.Org XInput driver, version 16.0
[ 29.497] (II) Using input driver 'evdev' for 'Power Button'
[ 29.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.497] (**) Power Button: always reports core events
[ 29.497] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 29.497] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.497] (--) evdev: Power Button: Found keys
[ 29.497] (II) evdev: Power Button: Configuring as keyboard
[ 29.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 29.497] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.497] (**) Option "xkb_rules" "evdev"
[ 29.497] (**) Option "xkb_model" "pc105"
[ 29.497] (**) Option "xkb_layout" "us"
[ 29.498] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 29.498] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.498] (II) Using input driver 'evdev' for 'Power Button'
[ 29.498] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.498] (**) Power Button: always reports core events
[ 29.498] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 29.498] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.498] (--) evdev: Power Button: Found keys
[ 29.498] (II) evdev: Power Button: Configuring as keyboard
[ 29.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 29.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 29.498] (**) Option "xkb_rules" "evdev"
[ 29.498] (**) Option "xkb_model" "pc105"
[ 29.498] (**) Option "xkb_layout" "us"
[ 29.498] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event2)
[ 29.498] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29.498] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 29.498] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.498] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 29.498] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
[ 29.499] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc043
[ 29.499] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 29.499] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 29.499] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 29.499] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 29.499] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 29.499] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 29.499] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29.499] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.499] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2/event2"
[ 29.499] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 29.499] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 29.499] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 29.499] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 29.499] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 29.499] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 29.499] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 29.499] (II) No input driver specified, ignoring this device.
[ 29.499] (II) This device may have been added with another device file.
[ 33.351] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BE4B0CF82C0398622D28E697AC7E6CAD5A4E5EB.xkm
- Kada instaliram novi Ubuntu, da li on stavlja neke default video drivere? Ako da, da li ih moram maknut prije nego što stavim drivere od Nvidie?
- Trenutno koristim dual boot sa Windowsima 7, s time da koristim boot loader od Windowsa. Setup sam sredio prema ovom linku:
Kod: Označi sve
http://www.linuxbsdos.com/2011/05/22/how-to-dual-boot-windows-7-and-ubuntu-11-04/Test prvoklasne inteligencije sastoji se u sposobnosti istovremenog držanja dviju suprotnih ideja u glavi, a da se pritom zadrži sposobnost funkcioniranja.
Re: Ubuntu random logout
Jesi to dmesg pokrenuo s livecda? Ako jesi to mi nevalja, to je od live sistema, ne od onog tvog prijasnjeg sistema, trebaju mi /var/log/kernel.log.1 i /var/log/Xorg.old.log sa tvoje root/var particije di ti je sustav na hardu. I pazi da ti se prije toga pojavi problem na tvojem sustavu.
Hvala.
EDIT:
E da, sto se tice drivera ti neznam - nekoristim ubuntu. A sto se tice MBR-a, AFAIK windowsi to rade pri instalaciji, da to rade pri upgradeu jos nisam cuo... Tako da ti je preporucljivo prvo instalirat windowse pa onda ubuntu(tako da ti windowsi ne prepisu MBR pa onda opet nece imat grub/morat ces ga ponovno stavljat na MBR)
Hvala.
EDIT:
E da, sto se tice drivera ti neznam - nekoristim ubuntu. A sto se tice MBR-a, AFAIK windowsi to rade pri instalaciji, da to rade pri upgradeu jos nisam cuo... Tako da ti je preporucljivo prvo instalirat windowse pa onda ubuntu(tako da ti windowsi ne prepisu MBR pa onda opet nece imat grub/morat ces ga ponovno stavljat na MBR)