Re: Wireless(WiFi) ne radi...
Postano: 25 tra 2011, 17:42
btw naletil na recenziju istog sa ubuntu 10.04
Setting Up On-board Wireless
The drivers for the wireless card are included “out of the box” with this version of Ubuntu but there is an internal switch that stops the card from being turned on and detected properly. We need to use the modprobe command to load a driver that is capable of interacting with this switch:
sudo modprobe fsam7400 radio=1
Now the wireless should work until you next reboot.
If you want to make the wireless switch on at system start you need edit the /etc/modules file
sudo nano /etc/modules
and add
fsam7400
to the bottom of the list.
From now on the driver module will be loaded at boot.
Next we need to pass an argument to the driver when it starts so that it will switch the radio hardware on.
Make a file called:
/etc/modprobe.d/fsam7400
In the file put the line:
options fsam7400 radio=1
Now the on-board wireless should be on and ready go after every boot.