Re: EZTV858 USB DVB-T
Postano: 02 pro 2012, 21:50
nista od ovog.ali kad ukopcam usb kaže mi da ima novi driver dostupan.kad otvorim instaliraj nove drivere otvori se samo lista drivera grafičku 
Regionalni Linux forum
https://www.linuxzasve.com/forum/
Kod: Označi sve
root@Tomislav-PC:/home/tomislav# cd '/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC'
root@Tomislav-PC:/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC# make clean
root@Tomislav-PC:/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC# make
make -C /lib/modules/3.2.0-34-generic/build SUBDIRS=/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC modules
make[1]: Ulazim u direktorij `/usr/src/linux-headers-3.2.0-34-generic'
CC [M] /home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135-core.o
In file included from /home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135-core.c:1:0:
/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135.h:15:21: fatal error: dvb-usb.h: Nema takve datoteke ili direktorija
compilation terminated.
make[2]: *** [/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC/it9135-core.o] Greška 1
make[1]: *** [_module_/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC] Greška 2
make[1]: Izlazim iz direktorija `/usr/src/linux-headers-3.2.0-34-generic'
make: *** [default] Greška 2
root@Tomislav-PC:/home/tomislav/9130.linux.PC.dvb-tV9.12.18.1/64bit/IT9135_SRC#Kod: Označi sve
root@Tomislav-PC:/home/tomislav# git clone git://linuxtv.org/media_build.git
fatal: destination path 'media_build' already exists and is not an empty directory.
root@Tomislav-PC:/home/tomislav# cd media_build
root@Tomislav-PC:/home/tomislav/media_build# ./build
Checking if the needed tools for Ubuntu 12.04.1 LTS are available
Needed package dependencies are met.
************************************************************
* This script will download the latest tarball and build it*
* Assuming that your kernel is compatible with the latest *
* drivers. If not, you'll need to add some extra backports,*
* ./backports/<kernel> directory. *
* It will also update this tree to be sure that all compat *
* bits are there, to avoid compilation failures *
************************************************************
************************************************************
* All drivers and build system are under GPLv2 License *
* Firmware files are under the license terms found at: *
* http://www.linuxtv.org/downloads/firmware/ *
* Please abort if you don't agree with the license *
************************************************************
****************************
Updating the building system
****************************
From git://linuxtv.org/media_build
* branch master -> FETCH_HEAD
Already up-to-date.
make: Ulazim u direktorij `/home/tomislav/media_build/linux'
wget http://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5 -O linux-media.tar.bz2.md5.tmp
--2012-12-02 22:20:20-- http://linuxtv.org/downloads/drivers/linux-media-LATEST.tar.bz2.md5
Tražim linuxtv.org (linuxtv.org)... 130.149.80.248, 8295:50f8:60:1468:ee::1
Spajanje na linuxtv.org (linuxtv.org)|130.149.80.248|:80... spojen.
HTTP zahtjev poslan, čeka se odgovor... 200 OK
Veličina: 93 [application/x-bzip2]
Spremanje u: `linux-media.tar.bz2.md5.tmp'
100%[======================================>] 93 --.-K/s in 0s
2012-12-02 22:20:21 (6,92 MB/s) - `linux-media.tar.bz2.md5.tmp' preuzeto [93/93]
make: Izlazim iz direktorija `/home/tomislav/media_build/linux'
make: Ulazim u direktorij `/home/tomislav/media_build/linux'
tar xfj linux-media.tar.bz2
rm -f .patches_applied .linked_dir .git_log.md5
make: Izlazim iz direktorija `/home/tomislav/media_build/linux'
**********************************************************
* Downloading firmwares from linuxtv.org. *
**********************************************************
dvb-fe-bcm3510-01.fw
dvb-fe-or51132-qam.fw
dvb-fe-or51132-vsb.fw
dvb-fe-or51211.fw
dvb-fe-xc5000-1.6.114.fw
dvb-ttpci-01.fw-261a
dvb-ttpci-01.fw-261b
dvb-ttpci-01.fw-261c
dvb-ttpci-01.fw-261d
dvb-ttpci-01.fw-261f
dvb-ttpci-01.fw-2622
dvb-usb-avertv-a800-02.fw
dvb-usb-bluebird-01.fw
dvb-usb-dib0700-1.20.fw
dvb-usb-dibusb-5.0.0.11.fw
dvb-usb-dibusb-6.0.0.8.fw
dvb-usb-dtt200u-01.fw
dvb-usb-terratec-h5-drxk.fw
dvb-usb-terratec-h7-az6007.fw
dvb-usb-terratec-h7-drxk.fw
dvb-usb-umt-010-02.fw
dvb-usb-vp702x-01.fw
dvb-usb-vp7045-01.fw
dvb-usb-wt220u-01.fw
dvb-usb-wt220u-02.fw
v4l-cx231xx-avcore-01.fw
v4l-cx23418-apu.fw
v4l-cx23418-cpu.fw
v4l-cx23418-dig.fw
v4l-cx23885-avcore-01.fw
v4l-cx23885-enc.fw
v4l-cx25840.fw
******************
* Start building *
******************
make -C /home/tomislav/media_build/v4l allyesconfig
make[1]: Ulazim u direktorij `/home/tomislav/media_build/v4l'
make[2]: Entering directory `/home/tomislav/media_build/linux'
Applying patches for kernel 3.2.0-34-generic
patch -s -f -N -p1 -i ../backports/api_version.patch
patch -s -f -N -p1 -i ../backports/pr_fmt.patch
patch -s -f -N -p1 -i ../backports/v3.5_dmabuf_removal.patch
Patched drivers/media/dvb-core/dvbdev.c
Patched drivers/media/v4l2-core/v4l2-dev.c
Patched drivers/media/rc/rc-main.c
make[2]: Leaving directory `/home/tomislav/media_build/linux'
./scripts/make_kconfig.pl /lib/modules/3.2.0-34-generic/build /lib/modules/3.2.0-34-generic/build 1
Preparing to compile for kernel version 3.2.0
***WARNING:*** You do not have the full kernel sources installed.
This does not prevent you from building the v4l-dvb tree if you have the
kernel headers, but the full kernel source may be required in order to use
make menuconfig / xconfig / qconfig.
If you are experiencing problems building the v4l-dvb tree, please try
building against a vanilla kernel before reporting a bug.
Vanilla kernels are available at http://kernel.org.
On most distros, this will compile a newly downloaded kernel:
cp /boot/config-`uname -r` <your kernel dir>/.config
cd <your kernel dir>
make all modules_install install
Please see your distro's web site for instructions to build a new kernel.
WARNING: This is the V4L/DVB backport tree, with experimental drivers
backported to run on legacy kernels from the development tree at:
http://git.linuxtv.org/media-tree.git.
It is generally safe to use it for testing a new driver or
feature, but its usage on production environments is risky.
Don't use it in production. You've been warned.
VIDEO_CODA: Requires at least kernel 3.6.0
VIDEO_MEM2MEM_DEINTERLACE: Requires at least kernel 3.3.0
VIDEO_M5MOLS: Requires at least kernel 3.6.0
VIDEO_S5K4ECGX: Requires at least kernel 3.4.0
Created default (all yes) .config file
./scripts/fix_kconfig.pl
make[1]: Izlazim iz direktorija `/home/tomislav/media_build/v4l'
make -C /home/tomislav/media_build/v4l
make[1]: Ulazim u direktorij `/home/tomislav/media_build/v4l'
./scripts/make_myconfig.pl
make[1]: Izlazim iz direktorija `/home/tomislav/media_build/v4l'
make[1]: Ulazim u direktorij `/home/tomislav/media_build/v4l'
perl scripts/make_config_compat.pl /lib/modules/3.2.0-34-generic/build ./.myconfig ./config-compat.h
creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/home/tomislav/media_build/v4l/firmware'
make[2]: Leaving directory `/home/tomislav/media_build/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/tomislav/media_build/v4l/firmware'
make[2]: Nothing to be done for `default'.
make[2]: Leaving directory `/home/tomislav/media_build/v4l/firmware'
Kernel build directory is /lib/modules/3.2.0-34-generic/build
make -C ../linux apply_patches
make[2]: Entering directory `/home/tomislav/media_build/linux'
Patches for 3.2.0-34-generic already applied.
make[2]: Leaving directory `/home/tomislav/media_build/linux'
make -C /lib/modules/3.2.0-34-generic/build SUBDIRS=/home/tomislav/media_build/v4l modules
make[2]: Entering directory `/usr/src/linux-headers-3.2.0-34-generic'
CC [M] /home/tomislav/media_build/v4l/altera-lpt.o
CC [M] /home/tomislav/media_build/v4l/altera-jtag.o
CC [M] /home/tomislav/media_build/v4l/altera-comp.o
CC [M] /home/tomislav/media_build/v4l/altera.o
CC [M] /home/tomislav/media_build/v4l/au0828-core.o
CC [M] /home/tomislav/media_build/v4l/au0828-i2c.o
CC [M] /home/tomislav/media_build/v4l/au0828-cards.o
CC [M] /home/tomislav/media_build/v4l/au0828-dvb.o
CC [M] /home/tomislav/media_build/v4l/au0828-video.o
CC [M] /home/tomislav/media_build/v4l/au0828-vbi.o
CC [M] /home/tomislav/media_build/v4l/flexcop-dma.o
CC [M] /home/tomislav/media_build/v4l/flexcop-pci.o
CC [M] /home/tomislav/media_build/v4l/flexcop-usb.o
CC [M] /home/tomislav/media_build/v4l/flexcop.o
CC [M] /home/tomislav/media_build/v4l/flexcop-fe-tuner.o
CC [M] /home/tomislav/media_build/v4l/flexcop-i2c.o
CC [M] /home/tomislav/media_build/v4l/flexcop-sram.o
CC [M] /home/tomislav/media_build/v4l/flexcop-eeprom.o
CC [M] /home/tomislav/media_build/v4l/flexcop-misc.o
CC [M] /home/tomislav/media_build/v4l/flexcop-hw-filter.o
CC [M] /home/tomislav/media_build/v4l/bttv-driver.o
CC [M] /home/tomislav/media_build/v4l/bttv-cards.o
CC [M] /home/tomislav/media_build/v4l/bttv-if.o
CC [M] /home/tomislav/media_build/v4l/bttv-risc.o
CC [M] /home/tomislav/media_build/v4l/bttv-vbi.o
CC [M] /home/tomislav/media_build/v4l/bttv-i2c.o
CC [M] /home/tomislav/media_build/v4l/bttv-gpio.o
CC [M] /home/tomislav/media_build/v4l/bttv-input.o
CC [M] /home/tomislav/media_build/v4l/bttv-audio-hook.o
CC [M] /home/tomislav/media_build/v4l/cpia2_v4l.o
CC [M] /home/tomislav/media_build/v4l/cpia2_usb.o
CC [M] /home/tomislav/media_build/v4l/cpia2_core.o
CC [M] /home/tomislav/media_build/v4l/cx18-alsa-main.o
CC [M] /home/tomislav/media_build/v4l/cx18-alsa-pcm.o
CC [M] /home/tomislav/media_build/v4l/cx18-driver.o
CC [M] /home/tomislav/media_build/v4l/cx18-cards.o
CC [M] /home/tomislav/media_build/v4l/cx18-i2c.o
CC [M] /home/tomislav/media_build/v4l/cx18-firmware.o
CC [M] /home/tomislav/media_build/v4l/cx18-gpio.o
CC [M] /home/tomislav/media_build/v4l/cx18-queue.o
CC [M] /home/tomislav/media_build/v4l/cx18-streams.o
CC [M] /home/tomislav/media_build/v4l/cx18-fileops.o
CC [M] /home/tomislav/media_build/v4l/cx18-ioctl.o
CC [M] /home/tomislav/media_build/v4l/cx18-controls.o
CC [M] /home/tomislav/media_build/v4l/cx18-mailbox.o
CC [M] /home/tomislav/media_build/v4l/cx18-vbi.o
CC [M] /home/tomislav/media_build/v4l/cx18-audio.o
CC [M] /home/tomislav/media_build/v4l/cx18-video.o
CC [M] /home/tomislav/media_build/v4l/cx18-irq.o
CC [M] /home/tomislav/media_build/v4l/cx18-av-core.o
CC [M] /home/tomislav/media_build/v4l/cx18-av-audio.o
CC [M] /home/tomislav/media_build/v4l/cx18-av-firmware.o
CC [M] /home/tomislav/media_build/v4l/cx18-av-vbi.o
CC [M] /home/tomislav/media_build/v4l/cx18-scb.o
CC [M] /home/tomislav/media_build/v4l/cx18-dvb.o
CC [M] /home/tomislav/media_build/v4l/cx18-io.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-audio.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-video.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-i2c.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-cards.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-core.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-avcore.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-417.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-pcb-cfg.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-vbi.o
CC [M] /home/tomislav/media_build/v4l/cx231xx-input.o
CC [M] /home/tomislav/media_build/v4l/cx23885-cards.o
CC [M] /home/tomislav/media_build/v4l/cx23885-video.o
CC [M] /home/tomislav/media_build/v4l/cx23885-vbi.o
CC [M] /home/tomislav/media_build/v4l/cx23885-core.o
CC [M] /home/tomislav/media_build/v4l/cx23885-i2c.o
CC [M] /home/tomislav/media_build/v4l/cx23885-dvb.o
CC [M] /home/tomislav/media_build/v4l/cx23885-417.o
CC [M] /home/tomislav/media_build/v4l/cx23885-ioctl.o
CC [M] /home/tomislav/media_build/v4l/cx23885-ir.o
CC [M] /home/tomislav/media_build/v4l/cx23885-av.o
CC [M] /home/tomislav/media_build/v4l/cx23885-input.o
CC [M] /home/tomislav/media_build/v4l/cx23888-ir.o
CC [M] /home/tomislav/media_build/v4l/netup-init.o
CC [M] /home/tomislav/media_build/v4l/cimax2.o
CC [M] /home/tomislav/media_build/v4l/netup-eeprom.o
CC [M] /home/tomislav/media_build/v4l/cx23885-f300.o
CC [M] /home/tomislav/media_build/v4l/cx23885-alsa.o
CC [M] /home/tomislav/media_build/v4l/cx25821-core.o
CC [M] /home/tomislav/media_build/v4l/cx25821-cards.o
CC [M] /home/tomislav/media_build/v4l/cx25821-i2c.o
CC [M] /home/tomislav/media_build/v4l/cx25821-gpio.o
CC [M] /home/tomislav/media_build/v4l/cx25821-medusa-video.o
CC [M] /home/tomislav/media_build/v4l/cx25821-video.o
CC [M] /home/tomislav/media_build/v4l/cx25821-video-upstream.o
CC [M] /home/tomislav/media_build/v4l/cx25821-video-upstream-ch2.o
CC [M] /home/tomislav/media_build/v4l/cx25821-audio-upstream.o
CC [M] /home/tomislav/media_build/v4l/cx25840-core.o
CC [M] /home/tomislav/media_build/v4l/cx25840-audio.o
CC [M] /home/tomislav/media_build/v4l/cx25840-firmware.o
CC [M] /home/tomislav/media_build/v4l/cx25840-vbi.o
CC [M] /home/tomislav/media_build/v4l/cx25840-ir.o
CC [M] /home/tomislav/media_build/v4l/cx88-video.o
^A CC [M] /home/tomislav/media_build/v4l/cx88-vbi.o
CC [M] /home/tomislav/media_build/v4l/cx88-mpeg.o
CC [M] /home/tomislav/media_build/v4l/cx88-cards.o
CC [M] /home/tomislav/media_build/v4l/cx88-core.o
itd...Kod: Označi sve
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 004: ID 062a:7223 Creative Labs
Bus 001 Device 006: ID 21ee:1100
Bus 002 Device 003: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 001 Device 012: ID 048d:9005 Integrated Technology Express, Inc. Kod: Označi sve
[ 0.304940] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.304942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.304944] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.304945] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.304947] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.304949] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.304951] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.304953] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.304955] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.304957] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.304958] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.304960] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.304962] pci_bus 0000:02: resource 1 [mem 0xdef00000-0xdfffffff]
[ 0.304964] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xddffffff 64bit pref]
[ 0.304998] NET: Registered protocol family 2
[ 0.305100] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.305878] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.308335] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.308633] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.308635] TCP reno registered
[ 0.308646] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.308673] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.308767] NET: Registered protocol family 1
[ 0.308954] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.308969] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 0.881526] Freeing initrd memory: 13880k freed
[ 0.888049] pci 0000:00:02.0: PCI INT A disabled
[ 0.888192] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.888207] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.888237] pci 0000:00:02.1: PCI INT B disabled
[ 0.888277] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888321] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888374] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888425] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888476] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888588] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888650] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.888665] pci 0000:02:00.0: Boot video device
[ 0.888673] PCI: CLS 64 bytes, default 64
[ 0.888862] PCI-DMA: Disabling AGP.
[ 0.891202] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.891203] PCI-DMA: using GART IOMMU.
[ 0.891205] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.893702] IBS: LVT offset 1 assigned
[ 0.893717] perf: AMD IBS detected (0x0000001f)
[ 0.893868] audit: initializing netlink socket (disabled)
[ 0.893878] type=2000 audit(1354480642.888:1): initialized
[ 0.912317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.914133] VFS: Disk quotas dquot_6.5.2
[ 0.914182] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.914617] fuse init (API version 7.17)
[ 0.914742] msgmni has been set to 7901
[ 0.915145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.915174] io scheduler noop registered
[ 0.915176] io scheduler deadline registered
[ 0.915222] io scheduler cfq registered (default)
[ 0.915338] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.915363] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.915448] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.915464] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.915524] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.915539] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.915608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.915632] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.915737] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.915741] ACPI: Power Button [PWRB]
[ 0.915773] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.915775] ACPI: Power Button [PWRF]
[ 0.917548] ERST: Table is not found!
[ 0.917549] GHES: HEST is not enabled!
[ 0.917643] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.937969] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.020765] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.021104] Linux agpgart interface v0.103
[ 1.022452] brd: module loaded
[ 1.023243] loop: module loaded
[ 1.023418] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 1.023558] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.023572] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 1.023582] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 1.023586] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 1.023692] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 1.023701] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[ 1.023710] pata_acpi 0000:00:08.1: setting latency timer to 64
[ 1.023714] pata_acpi 0000:00:08.1: PCI INT B disabled
[ 1.023942] Fixed MDIO Bus: probed
[ 1.023956] tun: Universal TUN/TAP device driver, 1.6
[ 1.023957] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.024086] PPP generic driver version 2.4.2
[ 1.024203] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.024221] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 1.024243] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.024245] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.024280] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.024299] ehci_hcd 0000:00:02.1: debug port 1
[ 1.024305] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.024323] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdeefac00
[ 1.036046] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.036195] hub 1-0:1.0: USB hub found
[ 1.036198] hub 1-0:1.0: 10 ports detectedBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 004: ID 062a:7223 Creative Labs
Bus 001 Device 006: ID 21ee:1100
Bus 002 Device 003: ID 062a:0201 Creative Labs Defender Office Keyboard (K7310) S Zodiak KM-9010
Bus 001 Device 012: ID 048d:9005 Integrated Technology Express, Inc.
[ 1.036302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.036352] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 1.036372] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.036374] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.036453] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.036480] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdeefb000
[ 1.094179] hub 2-0:1.0: USB hub found
[ 1.094184] hub 2-0:1.0: 10 ports detected
[ 1.094282] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.094335] usbcore: registered new interface driver libusual
[ 1.094366] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.094808] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.094817] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.094971] mousedev: PS/2 mouse device common for all mice
[ 1.095101] rtc_cmos 00:02: RTC can wake from S4
[ 1.095248] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.095284] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.095349] device-mapper: uevent: version 1.0.3
[ 1.095436] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.095442] cpuidle: using governor ladder
[ 1.095443] cpuidle: using governor menu
[ 1.095445] EFI Variables Facility v0.08 2004-May-17
[ 1.095599] TCP cubic registered
[ 1.095674] NET: Registered protocol family 10
[ 1.096027] NET: Registered protocol family 17
[ 1.096030] Registering the dns_resolver key type
[ 1.096150] PM: Hibernation image not present or could not be loaded.
[ 1.096158] registered taskstats version 1
[ 1.100821] Magic number: 8:888:648
[ 1.100872] processor LNXCPU:01: hash matches
[ 1.100923] rtc_cmos 00:02: setting system clock to 2012-12-02 20:37:23 UTC (1354480643)
[ 1.100929] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00)
[ 1.100954] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 1.100956] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 1.100957] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 1.100958] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.101356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.101358] EDD information not available.
[ 1.102576] Freeing unused kernel memory: 924k freed
[ 1.102747] Write protecting the kernel read-only data: 12288k
[ 1.106786] Freeing unused kernel memory: 1608k freed
[ 1.110194] Freeing unused kernel memory: 1196k freed
[ 1.128298] udevd[84]: starting version 175
[ 1.158017] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.158177] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.158182] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 1.158186] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.221098] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr f4:6d:04:70:9e:00
[ 1.221102] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.221152] pata_amd 0000:00:06.0: version 0.4.1
[ 1.221186] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.221423] scsi0 : pata_amd
[ 1.221498] scsi1 : pata_amd
[ 1.221951] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.221953] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.222000] sata_nv 0000:00:08.0: version 3.5
[ 1.222008] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 1.222040] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.222202] scsi2 : sata_nv
[ 1.222248] scsi3 : sata_nv
[ 1.222316] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[ 1.222318] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[ 1.222334] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[ 1.222352] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.222510] scsi4 : sata_nv
[ 1.222556] scsi5 : sata_nv
[ 1.222624] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[ 1.222626] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[ 1.348049] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.408410] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 2.00, max UDMA/66
[ 1.408415] ata1.01: ATAPI: HL-DT-ST GCE-8527B, 1.02, max UDMA/33
[ 1.408421] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15)
[ 1.408425] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15)
[ 1.424346] ata1.00: configured for UDMA/66
[ 1.472285] ata1.01: configured for UDMA/33
[ 1.474761] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 2.00 PQ: 0 ANSI: 5
[ 1.476513] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.476517] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.476641] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.476693] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.477148] scsi 0:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8527B 1.02 PQ: 0 ANSI: 5
[ 1.480536] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.480724] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.480787] hub 1-1:1.0: USB hub found
[ 1.480803] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.480845] hub 1-1:1.0: 4 ports detected
[ 1.480953] ata2: port disabled--ignoring
[ 1.542283] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.592053] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 1.688065] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.712686] ata3.00: ATA-8: WDC WD1600AAJS-00Z0A0, 01.03E01, max UDMA/133
[ 1.712689] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.728736] ata3.00: configured for UDMA/133
[ 1.728916] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
[ 1.729066] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.729143] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.729171] sd 2:0:0:0: [sda] Write Protect is off
[ 1.729173] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.729185] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.787426] sda: sda1 sda2 < sda5 >
[ 1.787721] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.892049] Refined TSC clocksource calibration: 3013.705 MHz.
[ 1.892055] Switching to clocksource tsc
[ 2.032105] usb 1-1.4: new full-speed USB device number 6 using ehci_hcd
[ 2.050283] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.085493] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.370259] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.436069] usb 2-3: new full-speed USB device number 2 using ohci_hcd
[ 2.956042] usb 2-4: new low-speed USB device number 3 using ohci_hcd
[ 6.180353] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.566569] Adding 4192252k swap on /dev/sda5. Priority:-1 extents:1 across:4192252k
[ 6.684870] udevd[407]: starting version 175
[ 7.841241] lp: driver loaded but no devices found
[ 8.691778] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.247874] parport_pc 00:05: reported by Plug and Play ACPI
[ 9.247919] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.255744] ppdev: user-space parallel port driver
[ 9.344355] lp0: using parport0 (interrupt-driven).
[ 9.471995] ACPI: resource nForce2_smbus [io 0x0600-0x063f] conflicts with ACPI region SMRG [io 0x600-0x6ff]
[ 9.471999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.472077] i2c i2c-0: nForce2 SMBus adapter at 0x700
[ 9.494170] MCE: In-kernel MCE decoding enabled.
[ 9.512125] EDAC MC: Ver: 2.1.0
[ 9.823707] AMD64 EDAC driver v3.4.0
[ 9.823745] EDAC amd64: DRAM ECC disabled.
[ 9.823753] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.823755] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.823756] (Note that use of the override may cause unknown side effects.)
[ 10.314016] Bluetooth: Core ver 2.16
[ 10.314039] NET: Registered protocol family 31
[ 10.314040] Bluetooth: HCI device and connection manager initialized
[ 10.314043] Bluetooth: HCI socket layer initialized
[ 10.314045] Bluetooth: L2CAP socket layer initialized
[ 10.314049] Bluetooth: SCO socket layer initialized
[ 10.341275] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.341555] usbcore: registered new interface driver btusb
[ 10.705238] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
[ 10.705427] generic-usb 0003:062A:7223.0001: input,hidraw0: USB HID v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input0
[ 10.711267] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input3
[ 10.711351] generic-usb 0003:062A:7223.0002: input,hidraw1: USB HID v1.10 Keyboard [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input1
[ 10.717262] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4
[ 10.717339] generic-usb 0003:062A:0201.0003: input,hidraw2: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:02.0-4/input0
[ 10.727361] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input5
[ 10.727492] generic-usb 0003:062A:0201.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:02.0-4/input1
[ 10.727509] usbcore: registered new interface driver usbhid
[ 10.727511] usbhid: USB HID core driver
[ 11.382198] nvidia: module license 'NVIDIA' taints kernel.
[ 11.382202] Disabling lock debugging due to kernel taint
[ 11.431706] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 11.431723] nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
[ 11.431729] nvidia 0000:02:00.0: setting latency timer to 64
[ 11.431733] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 11.432032] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.43 Sun Aug 19 20:14:03 PDT 2012
[ 11.593578] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 11.593584] snd_hda_intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 11.593587] hda_intel: Disabling MSI
[ 11.593606] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 12.293674] type=1400 audit(1354480654.690:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=733 comm="apparmor_parser"
[ 12.293693] type=1400 audit(1354480654.690:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=734 comm="apparmor_parser"
[ 12.294056] type=1400 audit(1354480654.690:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser"
[ 12.294079] type=1400 audit(1354480654.690:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=734 comm="apparmor_parser"
[ 12.294257] type=1400 audit(1354480654.690:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser"
[ 12.294285] type=1400 audit(1354480654.690:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=734 comm="apparmor_parser"
[ 12.909481] type=1400 audit(1354480655.306:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=831 comm="apparmor_parser"
[ 12.909502] type=1400 audit(1354480655.306:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=830 comm="apparmor_parser"
[ 13.156153] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 13.156226] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 13.156283] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 13.156329] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 13.156578] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 13.156910] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 13.156925] snd_hda_intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 13.156927] hda_intel: Disabling MSI
[ 13.156974] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[ 14.172041] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.196042] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.220041] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.244044] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.244136] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input11
[ 14.244354] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input12
[ 14.244404] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input13
[ 14.244452] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input14
[ 17.587202] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 17.587205] vesafb: scrolling: redraw
[ 17.587208] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 17.587616] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90011380000, using 1216k, total 1216k
[ 17.587746] Console: switching to colour frame buffer device 80x30
[ 17.587755] fb0: VESA VGA frame buffer device
[ 17.697651] type=1400 audit(1354480660.094:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=942 comm="apparmor_parser"
[ 17.698104] type=1400 audit(1354480660.094:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=942 comm="apparmor_parser"
[ 17.766422] Bluetooth: RFCOMM TTY layer initialized
[ 17.766426] Bluetooth: RFCOMM socket layer initialized
[ 17.766428] Bluetooth: RFCOMM ver 1.11
[ 17.787202] init: failsafe main process (865) killed by TERM signal
[ 17.873112] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.873115] Bluetooth: BNEP filters: protocol multicast
[ 23.825333] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[ 25.475197] type=1400 audit(1354480667.870:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1068 comm="apparmor_parser"
[ 25.475595] type=1400 audit(1354480667.870:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser"
[ 25.475797] type=1400 audit(1354480667.870:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser"
[ 25.610440] type=1400 audit(1354480668.006:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1067 comm="apparmor_parser"
[ 25.676788] type=1400 audit(1354480668.074:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1071 comm="apparmor_parser"
[ 25.677244] type=1400 audit(1354480668.074:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1071 comm="apparmor_parser"
[ 25.680192] type=1400 audit(1354480668.078:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1072 comm="apparmor_parser"
[ 25.680665] type=1400 audit(1354480668.078:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1072 comm="apparmor_parser"
[ 25.871876] type=1400 audit(1354480668.270:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1073 comm="apparmor_parser"
[ 25.873902] type=1400 audit(1354480668.270:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1077 comm="apparmor_parser"
[ 28.813613] vboxdrv: Found 2 processor cores.
[ 28.813814] vboxdrv: fAsync=0 offMin=0x386 offMax=0xc11
[ 28.813862] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 28.813864] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 29.338790] vboxpci: IOMMU not found (not registered)
[ 34.184027] eth0: no IPv6 routers present
[ 38.533657] NVRM: GPU at 0000:02:00: GPU-db3f6a76-a166-5e7f-4d3e-38ba540724b3
[ 38.533663] NVRM: Your system is not currently configured to drive a VGA console
[ 38.533666] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 38.533668] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 38.533670] NVRM: drivers including, but not limited to, vesafb, may result in
[ 38.533671] NVRM: corruption and stability problems, and is not supported.
[ 78.201535] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 78.239706] ISOFS: changing to secondary root
[ 101.848281] usb 1-1.2: new high-speed USB device number 7 using ehci_hcd
[ 103.377488] WARNING: You are using an experimental version of the media stack.
[ 103.377492] As the driver is backported to an older kernel, it doesn't offer
[ 103.377496] enough quality for its usage in production.
[ 103.377499] Use it with care.
[ 103.377501] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 103.377504] d8658bca2e5696df2b6c69bc5538f8fe54e4a01e [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
[ 103.377508] b057c3c32229c0db914c03eefb2579d877612926 [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
[ 103.377512] e023a11342b6624cc019c8cecfc488882f0721f9 [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
[ 103.442289] WARNING: You are using an experimental version of the media stack.
[ 103.442295] As the driver is backported to an older kernel, it doesn't offer
[ 103.442299] enough quality for its usage in production.
[ 103.442301] Use it with care.
[ 103.442303] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 103.442307] d8658bca2e5696df2b6c69bc5538f8fe54e4a01e [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
[ 103.442311] b057c3c32229c0db914c03eefb2579d877612926 [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
[ 103.442315] e023a11342b6624cc019c8cecfc488882f0721f9 [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
[ 103.600348] usbcore: registered new interface driver dvb_usb_it913x
[ 103.603461] it913x: Chip Version=01 Chip Type=9135
[ 103.605475] it913x: Remote propriety (raw) mode
[ 103.605955] it913x: Dual mode=0 Tuner Type=0
[ 103.607963] usb 1-1.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[ 103.697617] usb 1-1.2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[ 103.697632] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[ 103.697656] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnected
[ 803.201258] usb 1-1.2: USB disconnect, device number 7
[ 807.240280] usb 1-1.2: new high-speed USB device number 8 using ehci_hcd
[ 807.342990] it913x: Chip Version=01 Chip Type=9135
[ 807.345088] it913x: Remote propriety (raw) mode
[ 807.345616] it913x: Dual mode=0 Tuner Type=0
[ 807.347616] usb 1-1.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[ 807.352767] usb 1-1.2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[ 807.352782] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[ 807.352804] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnected
[ 950.924998] usb 1-1.2: USB disconnect, device number 8
[ 3026.788155] usb 1-1.2: new high-speed USB device number 9 using ehci_hcd
[ 3026.886183] it913x: Chip Version=01 Chip Type=9135
[ 3026.905092] it913x: Remote propriety (raw) mode
[ 3026.906142] it913x: Dual mode=0 Tuner Type=0
[ 3026.908196] usb 1-1.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[ 3027.084741] usb 1-1.2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[ 3027.084757] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[ 3027.084779] usb 1-1.2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnected
[ 3186.580391] usb 1-1.2: USB disconnect, device number 9
[ 3195.180779] usb 1-2: USB disconnect, device number 3
[ 3195.436121] usb 2-3: USB disconnect, device number 2
[ 3205.672106] usb 2-3: new full-speed USB device number 4 using ohci_hcd
[ 3205.894419] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input15
[ 3205.894734] generic-usb 0003:062A:7223.0005: input,hidraw0: USB HID v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input0
[ 3205.900517] input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input16
[ 3205.900758] generic-usb 0003:062A:7223.0006: input,hidraw1: USB HID v1.10 Keyboard [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:02.0-3/input1
[ 3209.264112] usb 1-2: new high-speed USB device number 12 using ehci_hcd
[ 3209.402354] it913x: Chip Version=01 Chip Type=9135
[ 3209.404353] it913x: Remote propriety (raw) mode
[ 3209.404857] it913x: Dual mode=0 Tuner Type=0
[ 3209.406990] usb 1-2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[ 3209.410367] usb 1-2: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -2
[ 3209.410382] usb 1-2: dvb_usb_v2: 'ITE 9135(9005) Generic' error while loading driver (-2)
[ 3209.410404] usb 1-2: dvb_usb_v2: 'ITE 9135(9005) Generic' successfully deinitialized and disconnectedKod: Označi sve
root@Tomislav-PC:/tmp# sudo dpkg -i linux-headers-3.3.0-generic_amd64.deb
dpkg: error processing linux-headers-3.3.0-generic_amd64.deb (--install):
linux-headers-3.3.0-030300-generic: 3.3.0-030300.201203182135 (Multi-Arch: no) is not co-installable with linux-headers-3.3.0-030300-generic:i386 3.3.0-030300.201203182135 (Multi-Arch: no) which is currently installed
Errors were encountered while processing:
linux-headers-3.3.0-generic_amd64.deb
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 3.3.0-030300-generic /boot/vmlinuz-3.3.0-030300-generic
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information.
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/nvidia-173/173.14.35/build/make.log for more information.
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/nvidia-current/295.40/build/make.log for more information.
ERROR (dkms apport): kernel package linux-headers-3.3.0-030300-generic is not supported
Error! Bad return status for module build on kernel: 3.3.0-030300-generic (x86_64)
Consult /var/lib/dkms/nvidia-current-updates/304.43/build/make.log for more information.