Web kamera za Skype

[dajac59]

dajac@dajac-775VM800 ~ $ lsusb
Bus 001 Device 005: ID 0c45:627b Microdia PC Camera (SN9C201 + OV7660)
Bus 001 Device 006: ID 1058:0704 Western Digital Technologies, Inc. Passport External HDD
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 002: ID 04fc:05d8 Sunplus Technology Co., Ltd Wireless keyboard/mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dajac@dajac-775VM800 ~ $


evo što mi izbaci

[dajac59]

nitko mi ne odgovara,kako upaliti kameru,crno ko i u gospodaarstvu hrvatske

[PunkBastard]

Jesi pokušao pitati google ?

[dajac59]

ma jesam čovječe dragi,wiki stranicu,ma sve????

[PunkBastard]

A što znači da ne radi ? Jel se neće ni uključiti, jel ne radi na skypeu, jel ne radi na nekom drugom programu ili nečemu ? Detalji! I ako si nedavno instalirao distru, možda si dobio ono da uhvatiš sliku usera dok si pravio usera, dali je u tom slučaju radila kamera ?

[nicky]

https://groups.google.com/forum/#!topic ... 4cwHtsOrgk

Pogledaj na ovom linku, ima how to za tvoju kameru.

[dajac59]

kamera mi je uključena ali na skype neradi,sad ću ti poslati postavke kak su mi označene

[Suko]

1. Ukljuci kameru, pricekaj trideset sekundi i ovdje postaj zadnjih dvadeset linija od naredbe dmesg
2. Istaliraj program Cheese i reci da li kamera radi na njemu

[dajac59]

[img][img]http://www.pohrani.com/f/3t/Bl/2InKF0UG/prikazzaslona.png[/img][/img]

[dajac59]

Kod: Označi sve

[    0.121476] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.121564] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.121651] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.121736] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.121821] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.122071] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.122077] vgaarb: loaded
[    0.122079] vgaarb: bridge control possible 0000:01:00.0
[    0.122465] SCSI subsystem initialized
[    0.122586] libata version 3.00 loaded.
[    0.122644] ACPI: bus type usb registered
[    0.122692] usbcore: registered new interface driver usbfs
[    0.122716] usbcore: registered new interface driver hub
[    0.122780] usbcore: registered new device driver usb
[    0.122991] PCI: Using ACPI for IRQ routing
[    0.123003] PCI: pci_cache_line_size set to 64 bytes
[    0.123111] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.123115] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[    0.123325] NetLabel: Initializing
[    0.123330] NetLabel:  domain hash size = 128
[    0.123332] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.123350] NetLabel:  unlabeled traffic allowed by default
[    0.137188] AppArmor: AppArmor Filesystem Enabled
[    0.137258] pnp: PnP ACPI init
[    0.137291] ACPI: bus type pnp registered
[    0.137486] pnp 00:00: >[bus 00-ff]
[    0.137492] pnp 00:00: >[io  0x0cf8-0x0cff]
[    0.137497] pnp 00:00: >[io  0x0000-0x0cf7 window]
[    0.137500] pnp 00:00: >[io  0x0d00-0xffff window]
[    0.137504] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[    0.137508] pnp 00:00: >[mem 0x000c0000-0x000dffff window]
[    0.137512] pnp 00:00: >[mem 0x40000000-0xffffffff window]
[    0.137619] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.137668] pnp 00:01: >[dma 4]
[    0.137672] pnp 00:01: >[io  0x0000-0x000f]
[    0.137676] pnp 00:01: >[io  0x0081-0x0083]
[    0.137679] pnp 00:01: >[io  0x0087]
[    0.137682] pnp 00:01: >[io  0x0089-0x008b]
[    0.137685] pnp 00:01: >[io  0x008f]
[    0.137688] pnp 00:01: >[io  0x00c0-0x00df]
[    0.137736] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
[    0.137759] pnp 00:02: >[io  0x0070-0x0071]
[    0.137783] pnp 00:02: >[irq 8]
[    0.137831] pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.137851] pnp 00:03: >[io  0x0061]
[    0.137901] pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
[    0.137922] pnp 00:04: >[io  0x00f0-0x00ff]
[    0.137933] pnp 00:04: >[irq 13]
[    0.137982] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.138638] pnp 00:05: >[io  0x03f0-0x03f5]
[    0.138643] pnp 00:05: >[io  0x03f7]
[    0.138653] pnp 00:05: >[irq 6]
[    0.138657] pnp 00:05: >[dma 2]
[    0.138769] pnp 00:05: >Plug and Play ACPI device, IDs PNP0700 (active)
[    0.139239] pnp 00:06: >[io  0x0378-0x037f]
[    0.139244] pnp 00:06: >[io  0x0778-0x077b]
[    0.139255] pnp 00:06: >[irq 7]
[    0.139259] pnp 00:06: >[dma 3]
[    0.139515] pnp 00:06: >Plug and Play ACPI device, IDs PNP0401 (active)
[    0.140080] pnp 00:07: >[io  0x0010-0x001f]
[    0.140085] pnp 00:07: >[io  0x0022-0x003f]
[    0.140088] pnp 00:07: >[io  0x0044-0x005f]
[    0.140091] pnp 00:07: >[io  0x0062-0x0063]
[    0.140094] pnp 00:07: >[io  0x0065-0x006f]
[    0.140097] pnp 00:07: >[io  0x0072-0x007f]
[    0.140100] pnp 00:07: >[io  0x0080]
[    0.140103] pnp 00:07: >[io  0x0084-0x0086]
[    0.140106] pnp 00:07: >[io  0x0088]
[    0.140109] pnp 00:07: >[io  0x008c-0x008e]
[    0.140112] pnp 00:07: >[io  0x0090-0x009f]
[    0.140115] pnp 00:07: >[io  0x00a2-0x00bf]
[    0.140118] pnp 00:07: >[io  0x00e0-0x00ef]
[    0.140121] pnp 00:07: >[io  0x0295-0x0296]
[    0.140124] pnp 00:07: >[io  0x03e0-0x03e7]
[    0.140127] pnp 00:07: >[mem 0xfff80000-0xffffffff]
[    0.140130] pnp 00:07: >[io  0x04d0-0x04d1]
[    0.140133] pnp 00:07: >[io  0x0800-0x087f]
[    0.140136] pnp 00:07: >[io  0x0400-0x041f]
[    0.140140] pnp 00:07: >[io  0x0000-0xffffffffffffffff disabled]
[    0.140288] system 00:07: >[io  0x0295-0x0296] has been reserved
[    0.140294] system 00:07: >[io  0x03e0-0x03e7] has been reserved
[    0.140298] system 00:07: >[io  0x04d0-0x04d1] has been reserved
[    0.140302] system 00:07: >[io  0x0800-0x087f] has been reserved
[    0.140306] system 00:07: >[io  0x0400-0x041f] has been reserved
[    0.140312] system 00:07: >[mem 0xfff80000-0xffffffff] has been reserved
[    0.140320] system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.140429] pnp 00:08: >[mem 0xfec00000-0xfec00fff]
[    0.140434] pnp 00:08: >[mem 0xfee00000-0xfee00fff]
[    0.140533] system 00:08: >[mem 0xfec00000-0xfec00fff] could not be reserved
[    0.140539] system 00:08: >[mem 0xfee00000-0xfee00fff] has been reserved
[    0.140546] system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.141018] pnp 00:09: >[io  0x03f8-0x03ff]
[    0.141037] pnp 00:09: >[irq 4]
[    0.141041] pnp 00:09: >[dma 0 disabled]
[    0.141196] pnp 00:09: >Plug and Play ACPI device, IDs PNP0501 (active)
[    0.141436] pnp 00:0a: >[mem 0x00000000-0x0009ffff]
[    0.141441] pnp 00:0a: >[mem 0x00000000-0xffffffffffffffff disabled]
[    0.141445] pnp 00:0a: >[mem 0x000e0000-0x000fffff]
[    0.141448] pnp 00:0a: >[mem 0x00100000-0x3fffffff]
[    0.141452] pnp 00:0a: >[mem 0x00000000-0xffffffffffffffff disabled]
[    0.141576] system 00:0a: >[mem 0x00000000-0x0009ffff] could not be reserved
[    0.141582] system 00:0a: >[mem 0x000e0000-0x000fffff] could not be reserved
[    0.141586] system 00:0a: >[mem 0x00100000-0x3fffffff] could not be reserved
[    0.141594] system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.141851] pnp: PnP ACPI: found 11 devices
[    0.141856] ACPI: ACPI bus type pnp unregistered
[    0.141863] PnPBIOS: Disabled by ACPI PNP
[    0.179765] Switching to clocksource acpi_pm
[    0.179857] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.179867] pci 0000:00:01.0: >  bridge window [io  0xa000-0xafff]
[    0.179875] pci 0000:00:01.0: >  bridge window [mem 0xff500000-0xff5fffff]
[    0.179881] pci 0000:00:01.0: >  bridge window [mem 0xb7f00000-0xf7efffff pref]
[    0.179908] pci 0000:00:01.0: >setting latency timer to 64
[    0.179916] pci_bus 0000:00: >resource 4 [io  0x0000-0xffff]
[    0.179920] pci_bus 0000:00: >resource 5 [mem 0x00000000-0xfffffffff]
[    0.179924] pci_bus 0000:01: >resource 0 [io  0xa000-0xafff]
[    0.179928] pci_bus 0000:01: >resource 1 [mem 0xff500000-0xff5fffff]
[    0.179932] pci_bus 0000:01: >resource 2 [mem 0xb7f00000-0xf7efffff pref]
[    0.179932] NET: Registered protocol family 2
[    0.179932] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.179932] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.179932] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.179932] TCP: Hash tables configured (established 131072 bind 65536)
[    0.179932] TCP: reno registered
[    0.179932] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.179932] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.179932] NET: Registered protocol family 1
[    0.179932] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge
[    0.180054] pci 0000:00:11.0: >Bypassing VIA 8237 APIC De-Assert Message
[    0.180074] pci 0000:01:00.0: >Boot video device
[    0.180081] PCI: CLS 32 bytes, default 64
[    0.180856] audit: initializing netlink socket (disabled)
[    0.180884] type=2000 audit(1373371625.176:1): initialized
[    0.210803] Trying to unpack rootfs image as initramfs...
[    0.248435] highmem bounce pool size: 64 pages
[    0.248459] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.256285] VFS: Disk quotas dquot_6.5.2
[    0.256392] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.257477] fuse init (API version 7.19)
[    0.257662] msgmni has been set to 1711
[    0.272341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.272472] io scheduler noop registered
[    0.272476] io scheduler deadline registered (default)
[    0.272499] io scheduler cfq registered
[    0.272760] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.272801] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.273071] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.273082] ACPI: Power Button [PWRB]
[    0.273154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.273159] ACPI: Power Button [PWRF]
[    0.279080] GHES: HEST is not enabled!
[    0.284288] isapnp: Scanning for PnP cards...
[    0.290067] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.310520] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.398606] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.464870] Linux agpgart interface v0.103
[    0.464990] agpgart: Detected VIA VT3314 chipset
[    0.472591] agpgart-via 0000:00:00.0: >AGP aperture is 64M @ 0xf8000000
[    0.478044] brd: module loaded
[    0.484308] loop: module loaded
[    0.485253] Fixed MDIO Bus: probed
[    0.485339] tun: Universal TUN/TAP device driver, 1.6
[    0.485342] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.485461] PPP generic driver version 2.4.2
[    0.485564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.485661] ehci_hcd 0000:00:10.4: >EHCI Host Controller
[    0.485675] ehci_hcd 0000:00:10.4: >new USB bus registered, assigned bus number 1
[    0.485773] ehci_hcd 0000:00:10.4: >irq 21, io mem 0xff6ff800
[    0.496237] ehci_hcd 0000:00:10.4: >USB 2.0 started, EHCI 1.00
[    0.496325] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.496330] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.496334] usb usb1: >Product: EHCI Host Controller
[    0.496337] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.496340] usb usb1: >SerialNumber: 0000:00:10.4
[    0.496632] hub 1-0:1.0: >USB hub found
[    0.496644] hub 1-0:1.0: >8 ports detected
[    0.496795] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.496844] uhci_hcd: USB Universal Host Controller Interface driver
[    0.496912] uhci_hcd 0000:00:10.0: >UHCI Host Controller
[    0.496926] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 2
[    0.496965] uhci_hcd 0000:00:10.0: >irq 21, io base 0x0000c000
[    0.497028] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.497033] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.497036] usb usb2: >Product: UHCI Host Controller
[    0.497040] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.497042] usb usb2: >SerialNumber: 0000:00:10.0
[    0.497276] hub 2-0:1.0: >USB hub found
[    0.497285] hub 2-0:1.0: >2 ports detected
[    0.497423] uhci_hcd 0000:00:10.1: >UHCI Host Controller
[    0.497434] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 3
[    0.497470] uhci_hcd 0000:00:10.1: >irq 21, io base 0x0000c400
[    0.497536] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.497540] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.497544] usb usb3: >Product: UHCI Host Controller
[    0.497547] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.497550] usb usb3: >SerialNumber: 0000:00:10.1
[    0.497762] hub 3-0:1.0: >USB hub found
[    0.497771] hub 3-0:1.0: >2 ports detected
[    0.497895] uhci_hcd 0000:00:10.2: >UHCI Host Controller
[    0.497907] uhci_hcd 0000:00:10.2: >new USB bus registered, assigned bus number 4
[    0.497998] uhci_hcd 0000:00:10.2: >irq 21, io base 0x0000c800
[    0.498054] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.498059] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.498062] usb usb4: >Product: UHCI Host Controller
[    0.498065] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.498068] usb usb4: >SerialNumber: 0000:00:10.2
[    0.498279] hub 4-0:1.0: >USB hub found
[    0.498289] hub 4-0:1.0: >2 ports detected
[    0.498411] uhci_hcd 0000:00:10.3: >UHCI Host Controller
[    0.498423] uhci_hcd 0000:00:10.3: >new USB bus registered, assigned bus number 5
[    0.498460] uhci_hcd 0000:00:10.3: >irq 21, io base 0x0000cc00
[    0.498521] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.498526] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.498529] usb usb5: >Product: UHCI Host Controller
[    0.498533] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.498535] usb usb5: >SerialNumber: 0000:00:10.3
[    0.498748] hub 5-0:1.0: >USB hub found
[    0.498758] hub 5-0:1.0: >2 ports detected
[    0.498986] usbcore: registered new interface driver libusual
[    0.499060] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.504256] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.504284] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.504581] mousedev: PS/2 mouse device common for all mice
[    0.504870] rtc_cmos 00:02: >RTC can wake from S4
[    0.505129] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
[    0.505196] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.505312] device-mapper: uevent: version 1.0.3
[    0.505452] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.505554] EISA: Probing bus 0 at eisa.0
[    0.505606] EISA: Detected 0 cards.
[    0.505621] cpuidle: using governor ladder
[    0.505624] cpuidle: using governor menu
[    0.505626] EFI Variables Facility v0.08 2004-May-17
[    0.506062] ashmem: initialized
[    0.506290] TCP: cubic registered
[    0.506474] NET: Registered protocol family 10
[    0.506821] NET: Registered protocol family 17
[    0.506850] Key type dns_resolver registered
[    0.506977] Using IPI No-Shortcut mode
[    0.507243] PM: Hibernation image not present or could not be loaded.
[    0.507268] registered taskstats version 1
[    0.907687] isapnp: No Plug & Play device found
[    0.960279] usb 1-2: >new high-speed USB device number 3 using ehci_hcd
[    1.096330] usb 1-2: >New USB device found, idVendor=0c45, idProduct=627b
[    1.096338] usb 1-2: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.096343] usb 1-2: >Product: USB20 Camera    
[    1.149088] Freeing initrd memory: 14724k freed
[    1.185911] Key type trusted registered
[    1.191594] Key type encrypted registered
[    1.197892]   Magic number: 5:19:127
[    1.198004] acpi device:02: >hash matches
[    1.198075] rtc_cmos 00:02: >setting system clock to 2013-07-09 12:07:07 UTC (1373371627)
[    1.198241] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.198245] EDD information not available.
[    1.198515] Freeing unused kernel memory: 756k freed
[    1.199943] Write protecting the kernel text: 5960k
[    1.199971] Write protecting the kernel read-only data: 2424k
[    1.199973] NX-protecting the kernel data: 4280k
[    1.208117] Refined TSC clocksource calibration: 2666.580 MHz.
[    1.208131] Switching to clocksource tsc
[    1.244112] usb 1-3: >new high-speed USB device number 4 using ehci_hcd
[    1.254981] udevd[84]: starting version 175
[    1.377493] usb 1-3: >New USB device found, idVendor=1058, idProduct=0704
[    1.377501] usb 1-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.377506] usb 1-3: >Product: External HDD    
[    1.377509] usb 1-3: >Manufacturer: Western Digital 
[    1.377513] usb 1-3: >SerialNumber: 57442D575845583038465841323632
[    1.391517] Initializing USB Mass Storage driver...
[    1.395611] usb-storage 1-3:1.0: >Quirks match for vid 1058 pid 0704: 8000
[    1.395699] scsi0 : usb-storage 1-3:1.0
[    1.395917] usbcore: registered new interface driver usb-storage
[    1.395922] USB Mass Storage support registered.
[    1.492106] usb 1-4: >new high-speed USB device number 5 using ehci_hcd
[    1.588173] Floppy drive(s): fd0 is 1.44M
[    1.608165] FDC 0 is a post-1991 82077
[    1.612210] pata_via 0000:00:0f.1: >version 0.3.4
[    1.614196] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.622539] scsi1 : pata_via
[    1.625216] scsi2 : pata_via
[    1.625771] usb 1-4: >New USB device found, idVendor=05e3, idProduct=0608
[    1.625778] usb 1-4: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.625783] usb 1-4: >Product: USB2.0 Hub
[    1.626352] hub 1-4:1.0: >USB hub found
[    1.626629] hub 1-4:1.0: >4 ports detected
[    1.642032] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.642040] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.653269] 8139cp 0000:00:0b.0: >This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.653364] sata_via 0000:00:0f.0: >version 2.6
[    1.653466] sata_via 0000:00:0f.0: >routed to hard irq line 11
[    1.656168] scsi3 : sata_via
[    1.658784] scsi4 : sata_via
[    1.658934] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    1.658940] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    1.682156] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    1.682650] via-rhine 0000:00:12.0: >eth0: VIA Rhine II at 0xff6ffc00, 00:13:8f:68:12:07, IRQ 23
[    1.683425] via-rhine 0000:00:12.0: >eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[    1.860084] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.871434] usb 2-1: >new low-speed USB device number 2 using uhci_hcd
[    1.871729] ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
[    1.871737] ata1.00: 156301488 sectors, multi 16: LBA48 
[    1.884467] ata1.00: configured for UDMA/100
[    1.884705] scsi 1:0:0:0: >Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5
[    1.885211] sd 1:0:0:0: >[sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.885315] sd 1:0:0:0: >[sda] Write Protect is off
[    1.885320] sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    1.885364] sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.885804] sd 1:0:0:0: >Attached scsi generic sg0 type 0
[    1.927219]  sda: sda1 sda2 < sda5 >
[    1.927929] sd 1:0:0:0: >[sda] Attached SCSI disk
[    2.048434] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[    2.050081] usb 2-1: >New USB device found, idVendor=04fc, idProduct=05d8
[    2.050086] usb 2-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.050091] usb 2-1: >Product: Trust Deskset 15220
[    2.050094] usb 2-1: >Manufacturer: MLK
[    2.064286] ata2.00: configured for UDMA/33
[    2.066483] scsi 2:0:0:0: >CD-ROM            TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
[    2.071954] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.071963] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.072297] sr 2:0:0:0: >Attached scsi CD-ROM sr0
[    2.072591] sr 2:0:0:0: >Attached scsi generic sg1 type 5
[    2.127002] usbcore: registered new interface driver usbhid
[    2.127012] usbhid: USB HID core driver
[    2.276024] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.288583] 8139too: 8139too Fast Ethernet driver 0.9.28
[    2.289420] 8139too 0000:00:0b.0: >eth1: RealTek RTL8139 at 0x0001b800, 00:40:f4:45:a2:2e, IRQ 19
[    2.323973] input: MLK Trust Deskset 15220 as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input2
[    2.345323] sunplus 0003:04FC:05D8.0001: >input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Deskset 15220] on usb-0000:00:10.0-1/input0
[    2.345361] sunplus 0003:04FC:05D8.0002: >fixing up Sunplus Wireless Desktop report descriptor
[    2.362547] input: MLK Trust Deskset 15220 as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input3
[    2.365274] sunplus 0003:04FC:05D8.0002: >input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Trust Deskset 15220] on usb-0000:00:10.0-1/input1
[    2.392796] scsi 0:0:0:0: >Direct-Access     WD       1600BEV External 1.75 PQ: 0 ANSI: 4
[    2.398918] sd 0:0:0:0: >Attached scsi generic sg2 type 0
[    2.399176] sd 0:0:0:0: >[sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.399819] sd 0:0:0:0: >[sdb] Write Protect is off
[    2.399828] sd 0:0:0:0: >[sdb] Mode Sense: 23 00 00 00
[    2.400446] sd 0:0:0:0: >[sdb] No Caching mode page present
[    2.400454] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[    2.402315] sd 0:0:0:0: >[sdb] No Caching mode page present
[    2.402324] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[    2.959947] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.959957] EXT4-fs (sda1): write access will be enabled during recovery
[    4.613270]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    4.617555] sd 0:0:0:0: >[sdb] No Caching mode page present
[    4.617565] sd 0:0:0:0: >[sdb] Assuming drive cache: write through
[    4.617570] sd 0:0:0:0: >[sdb] Attached SCSI disk
[    6.737185] EXT4-fs (sda1): recovery complete
[    6.753130] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   23.906986] Adding 1047548k swap on /dev/sda5.  Priority:-1 extents:1 across:1047548k 
[   23.945983] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.945997] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   24.012164] udevd[327]: starting version 175
[   24.103245] lp: driver loaded but no devices found
[   24.175543] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   25.020935] Bluetooth: Core ver 2.16
[   25.020998] NET: Registered protocol family 31
[   25.021001] Bluetooth: HCI device and connection manager initialized
[   25.021005] Bluetooth: HCI socket layer initialized
[   25.021007] Bluetooth: L2CAP socket layer initialized
[   25.021015] Bluetooth: SCO socket layer initialized
[   25.023601] parport_pc 00:06: >reported by Plug and Play ACPI
[   25.023750] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   25.038925] ppdev: user-space parallel port driver
[   25.053096] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.060188] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.060196] Bluetooth: BNEP filters: protocol multicast
[   25.157821] lp0: using parport0 (interrupt-driven).
[   25.242032] [drm] Initialized drm 1.1.0 20060810
[   25.611970] [drm] radeon defaulting to kernel modesetting.
[   25.611979] [drm] radeon kernel modesetting enabled.
[   25.732339] [drm] initializing kernel modesetting (RV350 0x1002:0x4152 0x174B:0x0830).
[   25.732396] [drm] register mmio base: 0xFF5F0000
[   25.732398] [drm] register mmio size: 65536
[   25.735507] agpgart-via 0000:00:00.0: >AGP 3.5 bridge
[   25.735531] agpgart-via 0000:00:00.0: >putting AGP V3 device into 8x mode
[   25.735626] radeon 0000:01:00.0: >putting AGP V3 device into 8x mode
[   25.735638] radeon 0000:01:00.0: >GTT: 64M 0xF8000000 - 0xFBFFFFFF
[   25.735643] [drm] Generation 2 PCI interface, using max accessible memory
[   25.735650] radeon 0000:01:00.0: >VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (256M used)
[   25.735680] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   25.735682] [drm] Driver supports precise vblank timestamp query.
[   25.735737] [drm] radeon: irq initialized.
[   25.741072] [drm] Detected VRAM RAM=256M, BAR=256M
[   25.741136] [drm] RAM width 128bits DDR
[   25.744438] [TTM] Zone  kernel: Available graphics memory: 445900 kiB
[   25.744444] [TTM] Zone highmem: Available graphics memory: 513328 kiB
[   25.744447] [TTM] Initializing pool allocator
[   25.744456] [TTM] Initializing DMA pool allocator
[   25.744516] [drm] radeon: 256M of VRAM memory ready
[   25.744519] [drm] radeon: 64M of GTT memory ready.
[   25.744608] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   25.745945] radeon 0000:01:00.0: >WB disabled
[   25.745957] radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0xf843c000
[   25.771607] Linux video capture interface: v2.00
[   25.774966] [drm] Loading R300 Microcode
[   25.775213] gspca_main: v2.14.0 registered
[   25.782916] gspca_main: gspca_sn9c20x-2.14.0 probing 0c45:627b
[   25.841254] gspca_sn9c20x: i2c_w error
[   26.021263] microcode: CPU0 sig=0xf41, pf=0x10, revision=0x17
[   26.045157] gspca_sn9c20x: OV7660 sensor initialization failed
[   26.045195] gspca_sn9c20x: probe of 1-2:1.0 failed with error -5
[   26.082273] usbcore: registered new interface driver gspca_sn9c20x
[   27.081304] init: failsafe main process (614) killed by TERM signal
[   27.641881] snd_via82xx 0000:00:11.5: >setting latency timer to 64
[   27.748520] 8139too 0000:00:0b.0: >eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   27.802053] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   27.808390] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   28.349174] [drm] radeon: ring at 0x00000000F8001000
[   28.349204] [drm] ring test succeeded in 0 usecs
[   28.349565] [drm] ib test succeeded in 0 usecs
[   28.351151] [drm] Radeon Display Connectors
[   28.351158] [drm] Connector 0:
[   28.351162] [drm]   VGA-1
[   28.351166] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   28.351168] [drm]   Encoders:
[   28.351170] [drm]     CRT1: INTERNAL_DAC1
[   28.351172] [drm] Connector 1:
[   28.351174] [drm]   DVI-I-1
[   28.351176] [drm]   HPD1
[   28.351179] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   28.351180] [drm]   Encoders:
[   28.351182] [drm]     CRT2: INTERNAL_DAC2
[   28.351184] [drm]     DFP1: INTERNAL_TMDS1
[   28.351185] [drm] Connector 2:
[   28.351188] [drm]   SVIDEO-1
[   28.351190] [drm]   Encoders:
[   28.351192] [drm]     TV1: INTERNAL_DAC2
[   28.433862] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   28.701261] [drm] fb mappable at 0xE0040000
[   28.701269] [drm] vram apper at 0xE0000000
[   28.701271] [drm] size 4177920
[   28.701274] [drm] fb depth is 24
[   28.701276] [drm]    pitch is 5440
[   28.701748] fbcon: radeondrmfb (fb0) is primary device
[   28.704940] Console: switching to colour frame buffer device 170x48
[   28.704999] fb0: radeondrmfb frame buffer device
[   28.705002] drm: registered panic notifier
[   28.705026] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
[   31.951761] init: plymouth-upstart-bridge main process (428) killed by TERM signal
[   33.128382] init: plymouth-stop pre-start process (1533) terminated with status 1
[   51.224121] end_request: I/O error, dev fd0, sector 0
[   51.264122] end_request: I/O error, dev fd0, sector 0
[   52.017971] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[  300.008028] [Hardware Error]: Machine check events logged
[14108.063733] usb 1-2: >USB disconnect, device number 3
[14114.632072] usb 1-2: >new high-speed USB device number 6 using ehci_hcd
[14114.766794] usb 1-2: >New USB device found, idVendor=0c45, idProduct=627b
[14114.766802] usb 1-2: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
[14114.766806] usb 1-2: >Product: USB20 Camera    
[14114.769001] gspca_main: gspca_sn9c20x-2.14.0 probing 0c45:627b
[14114.800307] gspca_sn9c20x: i2c_w error
[14115.004064] gspca_sn9c20x: OV7660 sensor initialization failed
[14115.004100] gspca_sn9c20x: probe of 1-2:1.0 failed with error -5
dajac@dajac-775VM800 ~ $ Cheese
No command 'Cheese' found, did you mean:
 Command 'cheese' from package 'cheese' (universe)
Cheese: command not found
dajac@dajac-775VM800 ~ $

Ispis naredbi pišemo u code tag.