Ubuntu-The window " - Preglednik datoteka" is not responding

[Lazar]

U Ubuntuu 10.04 dakle nakon ulaska u mapu (download, glazba, slike, bilo što), i dvije-tri radnje otvaranja nekih datoteka i sl. zamrzne i pokaže poruku The window " Preglednik datoteka" is not responding. Onda može samo "Force quit". Prečesto se dešava, ponekad i odmah kad se otvori mapa, a pojavilo se nakon jedne nadogradnje, sad ne znam koje, uglavnom prije dva mjeseca međutim bilo je dosta rijetko, ali sad nakon zadnjeg update-a je redovito. Na internetu nisam našao problem. Sve ostalo radi dobro.

[Lazar]

Anyone?

[shicy]

bilo bi dobro kad bi mogao vidit šta se zadnje updatealo, pa te pakete vratit na prijašnje verzije...ajde ovdje kao privitak baci ispis komande

Kod: Označi sve

dmesg

iz terminala...pa će netko pametniji možda vidjeti u čemu je problem

[stefan]

Probaj pobrisat pa ponovno instalirat nautilus. Rijec je o nautilusu?

[Lazar]

Nautilus je u pitanju, da.

Probat ću kad dođem doma i dmesg i reinstalaciju nautilusa pa ću javiti. Hvala.

[Lazar]

dmesg

Kod: Označi sve

[    0.181483] pci 0000:00:08.1: reg 18 io port: [0x960-0x967]
[    0.181486] pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63]
[    0.181489] pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f]
[    0.181492] pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[    0.181538] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.181540] pci 0000:00:09.0: PME# disabled
[    0.181573] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.181575] pci 0000:00:0b.0: PME# disabled
[    0.181605] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.181608] pci 0000:00:0c.0: PME# disabled
[    0.181713] pci 0000:00:04.0: transparent bridge
[    0.181715] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
[    0.181719] pci 0000:00:04.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[    0.181722] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff]
[    0.181743] pci 0000:02:00.0: reg 10 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.181750] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdde0000-0xfddeffff]
[    0.181755] pci 0000:02:00.0: reg 20 io port: [0xac00-0xacff]
[    0.181761] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.181775] pci 0000:02:00.0: supports D1 D2
[    0.181799] pci 0000:02:00.1: reg 10 64bit mmio: [0xfddfc000-0xfddfffff]
[    0.181824] pci 0000:02:00.1: supports D1 D2
[    0.181862] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
[    0.181864] pci 0000:00:09.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[    0.181867] pci 0000:00:09.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.181899] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
[    0.181902] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[    0.181905] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[    0.181937] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
[    0.181939] pci 0000:00:0c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[    0.181943] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[    0.181950] pci_bus 0000:00: on NUMA node 0
[    0.181954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.182089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.214373] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.214479] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.214585] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.214688] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.214793] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[    0.214897] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.215001] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.215106] ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7 9 10 11 14 15)
[    0.215210] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.215314] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.215419] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[    0.215524] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[    0.215628] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[    0.215732] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.215837] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.215941] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[    0.216047] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.216152] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[    0.216256] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[    0.216392] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.216526] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.216658] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.216791] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.216922] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[    0.217054] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.217187] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.217319] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[    0.217452] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0, disabled.
[    0.217585] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.217718] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[    0.217850] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
[    0.217983] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
[    0.218115] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
[    0.218247] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.218380] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[    0.218513] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.218647] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
[    0.218779] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
[    0.218876] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.218878] vgaarb: loaded
[    0.218959] SCSI subsystem initialized
[    0.219029] libata version 3.00 loaded.
[    0.219077] usbcore: registered new interface driver usbfs
[    0.219087] usbcore: registered new interface driver hub
[    0.219107] usbcore: registered new device driver usb
[    0.219196] ACPI: WMI: Mapper loaded
[    0.219198] PCI: Using ACPI for IRQ routing
[    0.219300] NetLabel: Initializing
[    0.219301] NetLabel:  domain hash size = 128
[    0.219302] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.219312] NetLabel:  unlabeled traffic allowed by default
[    0.219338] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.219341] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.224020] Switching to clocksource tsc
[    0.225160] AppArmor: AppArmor Filesystem Enabled
[    0.225169] pnp: PnP ACPI init
[    0.225178] ACPI: bus type pnp registered
[    0.229118] pnp: PnP ACPI: found 14 devices
[    0.229119] ACPI: ACPI bus type pnp unregistered
[    0.229123] PnPBIOS: Disabled by ACPI PNP
[    0.229131] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.229134] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.229136] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.229139] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.229141] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.229143] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.229146] system 00:01: ioport range 0x2000-0x207f has been reserved
[    0.229148] system 00:01: ioport range 0x2080-0x20ff has been reserved
[    0.229153] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.229155] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.229158] system 00:02: ioport range 0x290-0x29f has been reserved
[    0.229160] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.229166] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.229171] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
[    0.229173] system 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved
[    0.229176] system 00:0d: iomem range 0xbfee0000-0xbfefffff could not be reserved
[    0.229179] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[    0.229181] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.229184] system 00:0d: iomem range 0x100000-0xbfedffff could not be reserved
[    0.229186] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.229189] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.229191] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved
[    0.229194] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
[    0.229196] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved
[    0.229199] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved
[    0.263838] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[    0.263841] pci 0000:00:04.0:   IO window: 0xb000-0xbfff
[    0.263844] pci 0000:00:04.0:   MEM window: 0xfdf00000-0xfdffffff
[    0.263847] pci 0000:00:04.0:   PREFETCH window: 0xfde00000-0xfdefffff
[    0.263854] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[    0.263856] pci 0000:00:09.0:   IO window: 0xa000-0xafff
[    0.263859] pci 0000:00:09.0:   MEM window: 0xfdd00000-0xfddfffff
[    0.263861] pci 0000:00:09.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.263865] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[    0.263867] pci 0000:00:0b.0:   IO window: 0x9000-0x9fff
[    0.263869] pci 0000:00:0b.0:   MEM window: 0xfdc00000-0xfdcfffff
[    0.263872] pci 0000:00:0b.0:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[    0.263875] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[    0.263877] pci 0000:00:0c.0:   IO window: 0x8000-0x8fff
[    0.263880] pci 0000:00:0c.0:   MEM window: 0xfda00000-0xfdafffff
[    0.263882] pci 0000:00:0c.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[    0.263890] pci 0000:00:04.0: setting latency timer to 64
[    0.263895] pci 0000:00:09.0: setting latency timer to 64
[    0.263899] pci 0000:00:0b.0: setting latency timer to 64
[    0.263903] pci 0000:00:0c.0: setting latency timer to 64
[    0.263907] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.263909] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.263912] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    0.263914] pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff]
[    0.263916] pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff]
[    0.263918] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.263920] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.263923] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
[    0.263925] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[    0.263927] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.263929] pci_bus 0000:03: resource 0 io:  [0x9000-0x9fff]
[    0.263931] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[    0.263934] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[    0.263936] pci_bus 0000:04: resource 0 io:  [0x8000-0x8fff]
[    0.263938] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
[    0.263940] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
[    0.263971] NET: Registered protocol family 2
[    0.264044] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.264296] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.264774] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.265006] TCP: Hash tables configured (established 131072 bind 65536)
[    0.265008] TCP reno registered
[    0.265067] NET: Registered protocol family 1
[    0.287702] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.287748] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.287802] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.287855] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.287908] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.287966] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.288027] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.288091] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.288099] pci 0000:02:00.0: Boot video device
[    0.288268] cpufreq-nforce2: No nForce2 chipset.
[    0.288288] Scanning for low memory corruption every 60 seconds
[    0.288359] audit: initializing netlink socket (disabled)
[    0.288367] type=2000 audit(1312813914.287:1): initialized
[    0.295019] highmem bounce pool size: 64 pages
[    0.295023] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.295966] VFS: Disk quotas dquot_6.5.2
[    0.296007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.296387] fuse init (API version 7.13)
[    0.296444] msgmni has been set to 1615
[    0.296597] alg: No test for stdrng (krng)
[    0.296637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.296640] io scheduler noop registered
[    0.296641] io scheduler anticipatory registered
[    0.296643] io scheduler deadline registered
[    0.296670] io scheduler cfq registered (default)
[    0.296762]   alloc irq_desc for 24 on node -1
[    0.296764]   alloc kstat_irqs on node -1
[    0.296772] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[    0.296776] pcieport 0000:00:09.0: setting latency timer to 64
[    0.296830]   alloc irq_desc for 25 on node -1
[    0.296831]   alloc kstat_irqs on node -1
[    0.296835] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
[    0.296838] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.296889]   alloc irq_desc for 26 on node -1
[    0.296890]   alloc kstat_irqs on node -1
[    0.296894] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
[    0.296897] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.296937] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.296954] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.297028] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.297031] ACPI: Power Button [PWRB]
[    0.297075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.297078] ACPI: Power Button [PWRF]
[    0.297118] fan PNP0C0B:00: registered as cooling_device0
[    0.297122] ACPI: Fan [FAN] (on)
[    0.297367] processor LNXCPU:00: registered as cooling_device1
[    0.297388] processor LNXCPU:01: registered as cooling_device2
[    0.299993] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012)
[    0.299999] ACPI: Expecting a [Reference] package element, found type 0
[    0.300001] ACPI: Invalid passive threshold
[    0.300199] thermal LNXTHERM:01: registered as thermal_zone0
[    0.300206] ACPI: Thermal Zone [THRM] (40 C)
[    0.301148] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.301232] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.301469] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.302121] brd: module loaded
[    0.302408] loop: module loaded
[    0.302468] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.302598] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.302837] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.302841]   alloc irq_desc for 23 on node -1
[    0.302842]   alloc kstat_irqs on node -1
[    0.302850] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.302860] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.302866] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.303078] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[    0.303081] pata_acpi 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    0.303091] pata_acpi 0000:00:08.1: setting latency timer to 64
[    0.303096] pata_acpi 0000:00:08.1: PCI INT B disabled
[    0.303297] Fixed MDIO Bus: probed
[    0.303319] PPP generic driver version 2.4.2
[    0.303342] tun: Universal TUN/TAP device driver, 1.6
[    0.303344] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.303403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.303613] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.303615]   alloc irq_desc for 22 on node -1
[    0.303617]   alloc kstat_irqs on node -1
[    0.303623] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[    0.303631] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.303634] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.303664] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.303685] ehci_hcd 0000:00:02.1: debug port 1
[    0.303691] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.303708] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.303742] isapnp: Scanning for PnP cards...
[    0.325665] Freeing initrd memory: 7730k freed
[    0.352603] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.352666] usb usb1: configuration #1 chosen from 1 choice
[    0.352691] hub 1-0:1.0: USB hub found
[    0.352699] hub 1-0:1.0: 10 ports detected
[    0.352745] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.352968] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[    0.352970]   alloc irq_desc for 21 on node -1
[    0.352972]   alloc kstat_irqs on node -1
[    0.352978] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[    0.352986] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.352988] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.353008] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.353025] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[    0.409751] usb usb2: configuration #1 chosen from 1 choice
[    0.409774] hub 2-0:1.0: USB hub found
[    0.409784] hub 2-0:1.0: 10 ports detected
[    0.409835] uhci_hcd: USB Universal Host Controller Interface driver
[    0.409901] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.409903] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.410045] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.410104] mice: PS/2 mouse device common for all mice
[    0.410177] rtc_cmos 00:05: RTC can wake from S4
[    0.410205] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.410241] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.410312] device-mapper: uevent: version 1.0.3
[    0.410393] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.410437] device-mapper: multipath: version 1.1.0 loaded
[    0.410439] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.410519] EISA: Probing bus 0 at eisa.0
[    0.410525] Cannot allocate resource for EISA slot 1
[    0.410527] Cannot allocate resource for EISA slot 2
[    0.410541] Cannot allocate resource for EISA slot 8
[    0.410542] EISA: Detected 0 cards.
[    0.410591] cpuidle: using governor ladder
[    0.410592] cpuidle: using governor menu
[    0.410886] TCP cubic registered
[    0.410986] NET: Registered protocol family 10
[    0.411324] lo: Disabled Privacy Extensions
[    0.411558] NET: Registered protocol family 17
[    0.411580] powernow-k8: Found 1 AMD Athlon(tm) 7850 Dual-Core Processor processors (2 cpu cores) (version 2.20.00)
[    0.411615] powernow-k8:    0 : pstate 0 (2800 MHz)
[    0.411617] powernow-k8:    1 : pstate 1 (1400 MHz)
[    0.429762] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.483273] Using IPI No-Shortcut mode
[    0.483324] PM: Resume from disk failed.
[    0.483333] registered taskstats version 1
[    0.483565]   Magic number: 7:574:535
[    0.483574] bdi 1:13: hash matches
[    0.483652] rtc_cmos 00:05: setting system clock to 2011-08-08 14:31:55 UTC (1312813915)
[    0.483655] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.483656] EDD information not available.
[    0.656934] isapnp: No Plug & Play device found
[    0.656949] Freeing unused kernel memory: 680k freed
[    0.657262] Write protecting the kernel text: 4844k
[    0.657309] Write protecting the kernel read-only data: 1884k
[    0.669074] udev: starting version 151
[    0.707238] sata_nv 0000:00:08.0: version 3.5
[    0.707251] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.707285] sata_nv 0000:00:08.0: setting latency timer to 64
[    0.719271] scsi0 : sata_nv
[    0.729787] scsi1 : sata_nv
[    0.729950] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    0.729952] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    0.729991] pata_amd 0000:00:06.0: version 0.4.1
[    0.730028] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.736915] scsi2 : pata_amd
[    0.742759] scsi3 : pata_amd
[    0.743271] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.743274] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.743319] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.743544] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    0.743548]   alloc irq_desc for 20 on node -1
[    0.743550]   alloc kstat_irqs on node -1
[    0.743559] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
[    0.743563] forcedeth 0000:00:07.0: setting latency timer to 64
[    0.759577] FDC 0 is a post-1991 82077
[    0.907969] ata3.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
[    0.907992] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    0.923909] ata3.00: configured for UDMA/33
[    0.983655] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    1.188032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.191724] usb 2-1: configuration #1 chosen from 1 choice
[    1.199339] ata1.00: ATA-8: Hitachi HDT721032SLA360, ST2OA3AA, max UDMA/133
[    1.199342] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.216324] ata1.00: configured for UDMA/133
[    1.216430] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72103 ST2O PQ: 0 ANSI: 5
[    1.216553] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.216620] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.216646] sd 0:0:0:0: [sda] Write Protect is off
[    1.216648] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.216661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.216754]  sda: sda1 sda2 < sda5 > sda3 sda4
[    1.256129] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.257385] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:30:67:17:32:b6
[    1.257388] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.257411] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[    1.257447] sata_nv 0000:00:08.1: setting latency timer to 64
[    1.257481] scsi4 : sata_nv
[    1.257527] scsi5 : sata_nv
[    1.257666] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
[    1.257668] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
[    1.496011] usb 2-3: new low speed USB device using ohci_hcd and address 3
[    1.538268] ata2: SATA link down (SStatus 0 SControl 300)
[    1.539305] scsi 2:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
[    1.541905] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.541907] Uniform CD-ROM driver Revision: 3.20
[    1.541976] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.542018] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.542075] ata4: port disabled. ignoring.
[    1.582273] ata5: SATA link down (SStatus 0 SControl 300)
[    1.709704] usb 2-3: configuration #1 chosen from 1 choice
[    1.716538] usbcore: registered new interface driver hiddev
[    1.723825] input: HP Wireless Optical Mobile Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input4
[    1.723895] generic-usb 0003:03F0:8207.0001: input,hidraw0: USB HID v1.00 Mouse [HP Wireless Optical Mobile Mouse] on usb-0000:00:02.0-1/input0
[    1.723934] usbcore: registered new interface driver usbhid
[    1.723936] usbhid: v2.6:USB HID core driver
[    1.902273] ata6: SATA link down (SStatus 0 SControl 300)
[    2.229030] EXT4-fs (sda3): mounted filesystem with ordered data mode
[   12.470687] udev: starting version 151
[   12.561177] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   12.561193] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[   12.569730] vga16fb: initializing
[   12.569733] vga16fb: mapped to 0xc00a0000
[   12.569781] fb0: VGA16 VGA frame buffer device
[   12.599138] lp: driver loaded but no devices found
[   12.607513] Linux agpgart interface v0.103
[   12.612480] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   12.612485] Disabling lock debugging due to kernel taint
[   12.631465] type=1505 audit(1312806727.644:2):  operation="profile_load" pid=594 name="/sbin/dhclient3"
[   12.631675] type=1505 audit(1312806727.644:3):  operation="profile_load" pid=594 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   12.631795] type=1505 audit(1312806727.644:4):  operation="profile_load" pid=594 name="/usr/lib/connman/scripts/dhclient-script"
[   12.750471] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.750515] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.759046] [fglrx] Maximum main memory to use for locked dma buffers: 3857 MBytes.
[   12.759150] [fglrx]   vendor: 1002 device: 954f count: 1
[   12.759372] [fglrx] ioport: bar 4, base 0xac00, size: 0x100
[   12.759635] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   12.759640]   alloc irq_desc for 16 on node -1
[   12.759641]   alloc kstat_irqs on node -1
[   12.759650] pci 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[   12.759655] pci 0000:02:00.0: setting latency timer to 64
[   12.759809] [fglrx] Kernel PAT support is enabled
[   12.759821] [fglrx] module loaded - fglrx 8.72.11 [Apr  8 2010] with 1 minors
[   12.760733] input: DragonRise Inc.   Generic   USB  Joystick   as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input5
[   12.760790] dragonrise 0003:0079:0006.0002: input,hidraw1: USB HID v1.10 Joystick [DragonRise Inc.   Generic   USB  Joystick  ] on usb-0000:00:02.0-3/input0
[   12.760800] dragonrise 0003:0079:0006.0002: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley <richwalm@gmail.com>
[   12.806101] ppdev: user-space parallel port driver
[   12.832077] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   12.832081] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[   12.832084] hda_intel: Disable MSI for Nvidia chipset
[   12.832086] hda_intel: position_fix set to 1 for device 1565:820f
[   12.832106] HDA Intel 0000:00:05.0: setting latency timer to 64
[   12.836169] lp0: using parport0 (interrupt-driven).
[   12.870775] Console: switching to colour frame buffer device 80x30
[   13.368566] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input6
[   13.380586] EXT4-fs (sda4): mounted filesystem with ordered data mode
[   13.528385] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   13.528391] HDA Intel 0000:02:00.1: PCI INT B -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[   13.528424] HDA Intel 0000:02:00.1: setting latency timer to 64
[   15.020639]   alloc irq_desc for 27 on node -1
[   15.020643]   alloc kstat_irqs on node -1
[   15.020651] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
[   15.025324] type=1505 audit(1312806730.040:5):  operation="profile_replace" pid=868 name="/sbin/dhclient3"
[   15.025542] type=1505 audit(1312806730.040:6):  operation="profile_replace" pid=868 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   15.025668] type=1505 audit(1312806730.040:7):  operation="profile_replace" pid=868 name="/usr/lib/connman/scripts/dhclient-script"
[   15.027060] type=1505 audit(1312806730.040:8):  operation="profile_load" pid=867 name="/usr/share/gdm/guest-session/Xsession"
[   15.032642] type=1505 audit(1312806730.048:9):  operation="profile_load" pid=869 name="/usr/bin/evince"
[   15.040120] type=1505 audit(1312806730.052:10):  operation="profile_load" pid=872 name="/usr/lib/cups/backend/cups-pdf"
[   15.040385] type=1505 audit(1312806730.052:11):  operation="profile_load" pid=872 name="/usr/sbin/cupsd"
[   15.301728]   alloc irq_desc for 28 on node -1
[   15.301731]   alloc kstat_irqs on node -1
[   15.301740] fglrx_pci 0000:02:00.0: irq 28 for MSI/MSI-X
[   15.302231] [fglrx] Firegl kernel thread PID: 1051
[   15.302400] [fglrx] IRQ 28 Enabled
[   15.412201] CPU0 attaching NULL sched-domain.
[   15.412207] CPU1 attaching NULL sched-domain.
[   15.448547] CPU0 attaching sched-domain:
[   15.448550]  domain 0: span 0-1 level MC
[   15.448552]   groups: 0 1
[   15.448556] CPU1 attaching sched-domain:
[   15.448558]  domain 0: span 0-1 level MC
[   15.448559]   groups: 1 0
[   15.881280] [fglrx] Gart USWC size:1255 M.
[   15.881283] [fglrx] Gart cacheable size:498 M.
[   15.881288] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   15.881291] [fglrx] Reserved FB block: Unshared offset:fc11000, size:3ef000 
[   15.881293] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 
[   18.175461] CPU0 attaching NULL sched-domain.
[   18.175467] CPU1 attaching NULL sched-domain.
[   18.213012] CPU0 attaching sched-domain:
[   18.213016]  domain 0: span 0-1 level MC
[   18.213019]   groups: 0 1
[   18.213024] CPU1 attaching sched-domain:
[   18.213026]  domain 0: span 0-1 level MC
[   18.213027]   groups: 1 0
[   19.164761] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   25.624012] eth0: no IPv6 routers present

[Lazar]

Ništa nije upalilo, nego deinstalirao sam Nautilus, instalirao Dolphin i (za sada) radi .
Prije toga sam pokušao isto s Thunarom-i nije radilo.