p. djira je napisao/la:Hvala svima. Riješio sam problem reinstalacijom.
Što se tiče minimizacije izgubljenih sati to ti je optimalno rješenje.
Kako podignuti sustav OpenSUSE 12.3.
Moderator/ica: Moderatori/ce
Re: Kako podignuti sustav OpenSUSE 12.3.
Što se tiče minimizacije izgubljenih sati to ti je optimalno rješenje.
Like some other animals, the gecko can perform a neat trick when threatened by a predator: it can amputate its own tail. The dropped tail serves to distract the predator, and by losing it, the lizard can run faster.
Re: Kako podignuti sustav OpenSUSE 12.3.
bit ću fin pa neću novi topic otvarati...
vozim ovaj opensuse 12.3 od prvog dana kad je izašao i radio mi je ko urica do danas.
A danas nikako ga booati.
posliie gruba mi zapna na ovome dijelu:
uglavnom tako nekako, nisam 100% siguran dali sam točno prepisao...
i to traje i traje...
nakon 15 minuta nisam imao više strpljenja pa palim - gasim na silu, ali uvijek baca tako nešto slično ( ponekad u kombinaciji sa još nečima sličnim)..
Ok, neće...
izvučem od nekud live CD mint 14 pa ću se javiti na LZS forum pa će mi oni reć šta trebam...
cd šteka brutalno ništa od bootanja.
pa nađem live cd opensuse 12.3 kde a on mi kod dizanja zapne na:
pa ni njega nikako bootati!
i sad pišem sa windowsa koje sam planirao prebrisati....
Uglavom, ima li tko možda rješenje za moje jade?
Gdje se stvar potrgala da nikakv linux ne mogu nakuriti?
Ima i kakve pomoći bez formatiranja root particije?
Nisam upgradao sustav jučer, pa mi čudno da danas radi probleme...
vozim ovaj opensuse 12.3 od prvog dana kad je izašao i radio mi je ko urica do danas.
A danas nikako ga booati.
posliie gruba mi zapna na ovome dijelu:
Kod: Označi sve
trying manual resume from dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5
invokng userspace resume from dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5
resume libcript version 1.5.0uglavnom tako nekako, nisam 100% siguran dali sam točno prepisao...
i to traje i traje...
nakon 15 minuta nisam imao više strpljenja pa palim - gasim na silu, ali uvijek baca tako nešto slično ( ponekad u kombinaciji sa još nečima sličnim)..
Ok, neće...
izvučem od nekud live CD mint 14 pa ću se javiti na LZS forum pa će mi oni reć šta trebam...
cd šteka brutalno ništa od bootanja.
pa nađem live cd opensuse 12.3 kde a on mi kod dizanja zapne na:
Kod: Označi sve
Searching for boot device in Application ID...[ 2.122489]i sad pišem sa windowsa koje sam planirao prebrisati....
Uglavom, ima li tko možda rješenje za moje jade?
Gdje se stvar potrgala da nikakv linux ne mogu nakuriti?
Ima i kakve pomoći bez formatiranja root particije?
Nisam upgradao sustav jučer, pa mi čudno da danas radi probleme...
Re: Kako podignuti sustav OpenSUSE 12.3.
To kaj ti ni live cd(i) ne rade, nije dobar pokazatelj. Probaj, za početak, maknut bilo kakve reference resume particije u grub.cfg
Listen, I gotta fight the lion. That's what that guy Scott's all about. I know. I've studied him already.
Re: Kako podignuti sustav OpenSUSE 12.3.
Ne znam kako sam ga uspio bootati jučer iz stotog pokušaja i radi mi skroz normalno i sad mi ga je cima ugasiti jer mi se neda prolaziti ponovno kroz sve to. iz standbya se normano diže. Očito ga ne mogu vječno držati upaljenog pa bi mi trebala pomoć da se uvjerim da neće opet zaje...
evo moj grub.cfg file,
što bi točno tu trebalo pobrisati. Bi li moda bilo jednostavnije kroz yast nešto napraviti.Upaljen mi je kernel stabile repo pa onda ima masu toga redudantnoga unutra (možda ga to buni)...
evo moj grub.cfg file,
Kod: Označi sve
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="${saved_entry}"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
font="/usr/share/grub2/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
insmod gfxmenu
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans10.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans12.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/ascii.pf2
insmod png
set theme=($root)/boot/grub2/themes/openSUSE/theme.txt
export theme
if [ x${boot_once} = xtrue ]; then
set timeout=0
elif sleep --interruptible 0 ; then
set timeout=8
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'openSUSE 12.3' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.4-1.g51bf0ff-desktop ...'
linux /boot/vmlinuz-3.9.4-1.g51bf0ff-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.4-1.g51bf0ff-desktop
}
submenu 'Advanced options for openSUSE 12.3' $menuentry_id_option 'gnulinux-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
menuentry 'openSUSE 12.3, with Linux 3.9.4-1.g51bf0ff-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.4-1.g51bf0ff-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.4-1.g51bf0ff-desktop ...'
linux /boot/vmlinuz-3.9.4-1.g51bf0ff-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.4-1.g51bf0ff-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.9.4-1.g51bf0ff-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.4-1.g51bf0ff-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.4-1.g51bf0ff-desktop ...'
linux /boot/vmlinuz-3.9.4-1.g51bf0ff-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.4-1.g51bf0ff-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.9.2-1.g04040b9-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.2-1.g04040b9-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.2-1.g04040b9-desktop ...'
linux /boot/vmlinuz-3.9.2-1.g04040b9-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.2-1.g04040b9-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.9.2-1.g04040b9-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.2-1.g04040b9-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.2-1.g04040b9-desktop ...'
linux /boot/vmlinuz-3.9.2-1.g04040b9-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.2-1.g04040b9-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.9.1-1.gb6484b6-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.1-1.gb6484b6-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.1-1.gb6484b6-desktop ...'
linux /boot/vmlinuz-3.9.1-1.gb6484b6-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.1-1.gb6484b6-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.9.1-1.gb6484b6-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.1-1.gb6484b6-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.1-1.gb6484b6-desktop ...'
linux /boot/vmlinuz-3.9.1-1.gb6484b6-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.1-1.gb6484b6-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.9.0-1-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.0-1-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.0-1-desktop ...'
linux /boot/vmlinuz-3.9.0-1-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.0-1-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.9.0-1-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.9.0-1-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.9.0-1-desktop ...'
linux /boot/vmlinuz-3.9.0-1-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.9.0-1-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.8.9-1-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.9-1-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.8.9-1-desktop ...'
linux /boot/vmlinuz-3.8.9-1-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.8.9-1-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.8.9-1-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.8.9-1-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.8.9-1-desktop ...'
linux /boot/vmlinuz-3.8.9-1-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.8.9-1-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.16-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.16-desktop ...'
linux /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.16-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.16-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.16-desktop ...'
linux /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.16-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.11-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.11-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.11-desktop ...'
linux /boot/vmlinuz-3.7.10-1.11-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.11-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.11-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.11-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.11-desktop ...'
linux /boot/vmlinuz-3.7.10-1.11-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.11-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.4-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.4-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.4-desktop ...'
linux /boot/vmlinuz-3.7.10-1.4-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.4-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.4-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.4-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.4-desktop ...'
linux /boot/vmlinuz-3.7.10-1.4-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.4-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.1-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-advanced-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.1-desktop ...'
linux /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5 splash=silent quiet showopts i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.1-desktop
}
menuentry 'openSUSE 12.3, with Linux 3.7.10-1.1-desktop (recovery mode)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-recovery-507e6d68-171b-4c8a-8d40-593fe81b1175' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 --hint='hd0,msdos6' 507e6d68-171b-4c8a-8d40-593fe81b1175
else
search --no-floppy --fs-uuid --set=root 507e6d68-171b-4c8a-8d40-593fe81b1175
fi
echo 'Loading Linux 3.7.10-1.1-desktop ...'
linux /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=507e6d68-171b-4c8a-8d40-593fe81b1175 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.7.10-1.1-desktop
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/20_ppc_terminfo ###
### END /etc/grub.d/20_ppc_terminfo ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-4604315804314BE5' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 --hint='hd0,msdos1' 4604315804314BE5
else
search --no-floppy --fs-uuid --set=root 4604315804314BE5
fi
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/90_persistent ###
### END /etc/grub.d/90_persistent ###
Re: Kako podignuti sustav OpenSUSE 12.3.
ovo
ak se ne varam, to se da trajno maknut/podesit u YaST > Bootloader
Kod: Označi sve
resume=/dev/disk/by-id/ata-ST9500325AS_6VEVV076-part5Listen, I gotta fight the lion. That's what that guy Scott's all about. I know. I've studied him already.
Re: Kako podignuti sustav OpenSUSE 12.3.
Da, malo me isprepadao ovaj komentar u prvom redu grub.cfg...
pa bi ja to rađe iz yasta ako se da...Mislim, tko sam a da to propitkujem 
nego ovo je skrinšot iz yast->boot loader->boot loader options
Dali si mislio na ovo pod optional kernel comand line paramter ?
dali da to skroz pobrišem ili da nešto ubacim umjesto toga? Što?
Kod: Označi sve
DO NOT EDIT THIS FILEnego ovo je skrinšot iz yast->boot loader->boot loader options
Dali si mislio na ovo pod optional kernel comand line paramter ?
dali da to skroz pobrišem ili da nešto ubacim umjesto toga? Što?
Re: Kako podignuti sustav OpenSUSE 12.3.
Da, cijeli ovaj dio do splash=...juzer je napisao/la: Dali si mislio na ovo pod optional kernel comand line paramter ?
dali da to skroz pobrišem
Listen, I gotta fight the lion. That's what that guy Scott's all about. I know. I've studied him already.
Re: Kako podignuti sustav OpenSUSE 12.3.
Hvala, možda je i pomoglo....
obrisao sam to i probao restartati i ništa ...bacio mi isti tekst kao i do sad.
Isto i sa live cdom...
Nakon par neuspješnih pokušaja pustio sam ga da izblebeće svoje pa se bootao za 10ak minuta. Nakon toga još dva puta se normalno dignuo. Probati ću ga koristiti normalno par dana pa da vidim, ali nije mi baš lako gasit ga kad ne znam dali ću ga moći upaliti opet...
obrisao sam to i probao restartati i ništa ...bacio mi isti tekst kao i do sad.
Isto i sa live cdom...
Nakon par neuspješnih pokušaja pustio sam ga da izblebeće svoje pa se bootao za 10ak minuta. Nakon toga još dva puta se normalno dignuo. Probati ću ga koristiti normalno par dana pa da vidim, ali nije mi baš lako gasit ga kad ne znam dali ću ga moći upaliti opet...
Re: Kako podignuti sustav OpenSUSE 12.3.
uf, nije dobro...
pali svaki peti put i to ako imam strpljenja! Čini mi se da i ću moratit reinstal baciti
, ali stvarno mi nije jasno što se razštimalo...
pali svaki peti put i to ako imam strpljenja! Čini mi se da i ću moratit reinstal baciti
, ali stvarno mi nije jasno što se razštimalo...
Re: Kako podignuti sustav OpenSUSE 12.3.
imaš ti živaca...svaka čast na tome 