Sada je: 05 kol 2021, 17:49.
Linux, poslužitelj, mreže i sigurnost

Moderator/ica: Moderatori/ce

Da sve nebude ka po loju, uvik nešto.....................
Da najprije objasnin situaciju............
Znaći mreža se sastoji od:
ADSL modem
Wireless Ruter Linksys WRT54GL
Mrežni player muzike Squeezebox reciver ( ethernet )
Squeezebox duet controler - daljinski za upravljanje recivera ( wifi )
PC win XP ( ethernet )
Laptop win XP ( wifi )
Server - Ubuntu 8.04.2 server

Na serveru je samba, transmission 1,51 za torente, squeezecenter server za muziku koji triba za rad squeezecentra, i webmin.
Najprije je bija Freenas, ta transmission i squeezecenter, radija je ka sat, ali nije ima podršku za print server, i fs je bija UFS pa me malo bilo straj, jel ipak je ext3 podržan svugdi, postoji live cd od raznih distribucija, bla bla, freenas na bazi freebsd, itd,
I tako ja instaliran xubuntu, jel bez gui se baš i nisan snalazija, a tija san nešto lakše za celeron 800, i 384mb rama, i to sve super radi dok radi, radi bez greške, ali neće svaki put iz prve proradi kako triba pa neki servisi nebi radili................
Tako san ima dva dana odlućija ubuntu server stavit, isprinta san uputstva itd, i sve prošlo super, webmin, squeezecenter, malo me transmission zahebava al san i njega rješija, i sad sve radi ka sat, pali iz prve na po kljuća :mrgreen: , i sad iz webmina san iša sambu podesit, sve super i to, dva korisnika, itd, radi, uplain PC na njemu neće............
Kad iden na view workgroup computers xp izba ci mi workgroup is not accessible. you might not have permission to use this network resource. .....
Nisan ima pojma šta i izludilo me, više ni sa laptopa nije moglo ništa, onda san prominija IP na serveru i sve proradilo........, :misli , nakon restarta opet ništa, istu poruku izbaci, ali mapirani network drive se vidi normalno?????????, nevidu ni xp jedan drugoga................., ping prolazi u svin kombinacijama......, mrežni player uredno radi........,
Kad se zaustavi samba server onda win xp view workgroup computers onda sve normalno........
Ništa mi nije jasno...................

Sory na ovoj kobasici od posta, al mi se ćini bolje dat sve informacije,

Hvala


Evo configuration file


Kod: Označi sve
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]
   log file = /var/log/samba/log.%m
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
   socket options = TCP_NODELAY
   obey pam restrictions = yes
   write list = pinco,user2,@pinco
   map to guest = bad user
   encrypt passwords = true
   user = pinco
   passwd program = /usr/bin/passwd %u
   passdb backend = tdbsam
   dns proxy = no
   netbios name = ubuntu
   writeable = yes
   invalid users = root
   path = /media/storage/disk
   unix password sync = yes
   workgroup = WORKGROUP
   os level = 20
   comment = user data
   valid users = pinco,@pinco
   syslog = 0
   usershare allow guests = yes
   panic action = /usr/share/samba/panic-action %d
   max log size = 1000
   pam password change = yes

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

# server string is the equivalent of the NT Description field

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects

# Cap the size of the individual log files (in KiB).

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.

# Do something sensible when Samba crashes: mail the admin a backtrace


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
;   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 


;   guest account = nobody

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.

# This option controls how nsuccessful authentication attempts are mapped
# to anonymous connections

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom




[samba]
   valid users = pinco,user2,@pinco
   user = user2,pinco,@pinco
Postovi: 21
Postovi: 21
Pridružen/a: 13 sij 2009, 09:04
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
[quote="pinco"]

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
; security = user



Trebao bi otkomentirati ovu liniju. S obzirom da si definirao korisnike ostaviš ovo. Ako staviš security = share znači da svi mogu pristupiti tvom serveru bez autentifikacije.
Avatar
Site Admin
Postovi: 2074
Site Admin
Postovi: 2074
Pridružen/a: 07 pro 2007, 16:30
Lokacija: Zagreb
Podijelio/la zahvalu: 174 puta
Primio/la zahvalu: 278 puta
Spol: Ž
OS: ubuntu 12.04
Uspija san rješit......
Izvadija san netaknuti smb.conf file iz samba paketa, i stavija ga i krenija izpoćetka.........,
Sad iman drugi problem, kad kad nešto skinen iz transmissiona nemogu to obrisat, neman ovlasti........
Kreirat mogu i brisat, kad sa chown -Rv username /dir prominin korisnika na svoje ime onda mogu obrisat ali do idućega fila koji se skine, i opet nemogu brisat?????? jel ima neko rješenje?
Postovi: 21
Postovi: 21
Pridružen/a: 13 sij 2009, 09:04
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
pinco je napisao/la:Uspija san rješit......
Izvadija san netaknuti smb.conf file iz samba paketa, i stavija ga i krenija izpoćetka.........,
Sad iman drugi problem, kad kad nešto skinen iz transmissiona nemogu to obrisat, neman ovlasti........
Kreirat mogu i brisat, kad sa chown -Rv username /dir prominin korisnika na svoje ime onda mogu obrisat ali do idućega fila koji se skine, i opet nemogu brisat?????? jel ima neko rješenje?


Pogledaj tko je vlasnik napravljenih datoteka. Ako je smbguest, onda to nisi ti, pa zato i nemaš pravo pisanja po tim datotekama. Tada u smb.conf-u samo moraš postaviti svoj username da se koristi kao samba guest account (makar je to potencijalni security leak, to mi je prvo palo na pamet). Drugo bi možda mogao probati staviti da se prilikom generiranja fajlova u shareanom folderu automatski postavljaju permissioni.

Prilažem svoj smb.conf da ti bude vodič:

Kod: Označi sve
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = borg

# server string is the equivalent of the NT Description field
   server string = %h

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
;   encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes
   username map = /etc/samba/smbusers
   security = user
   guest ok = yes
   guest account = smbguest

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0775

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0775

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
;   guest ok = no
;   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers

[Funny stuff]
   comment = Very funny stuff
   path = /home/dodo/Phunny
;   available = yes
;   browseable = yes
   guest ok = yes
;   writeable = no

[shared_writable_folder]
   path = /home/dodo/Desktop/shared
;   available = yes
;   browseable = yes
   guest ok = yes
   writeable = yes
   comment = Writable folder. Username: guest Password: [empty]
   create mask = 0775
   directory mask = 0775

[Downloads]
   path = /home/dodo/Downloads
;   available = yes
;   browseable = yes
   guest ok = yes
;   writeable = No

[private]
   path = /home/dodo/private
;   available = yes
;   browseable = yes
   writeable = yes
   write list = dodo
   valid users = dodo
   comment = My private data. Not for public use!

[Glazba]
   path = /home/dodo/Glazba
;   available = yes
;   browseable = yes
   guest ok = yes
;   writeable = No

:mrgreen: Smile! It makes people wonder what you're thinking about... :mrgreen:
I am NaN, I am a free man!
Započnite svoje Linux iskustvo na http://wiki.open.hr
Avatar
Postovi: 1559
Postovi: 1559
Pridružen/a: 23 sij 2008, 11:51
Lokacija: ~/Croatia/Zagorje/Radoboj
Podijelio/la zahvalu: 45 puta
Primio/la zahvalu: 18 puta
Spol: M
OS: GNOME 3
Izgleda da nije do sambe, iako je disk i svi direktoriji stavljen vlasnik pinco, ono šta transmission downloada postne root vlasnik........, nije mi jasno kako......
Postovi: 21
Postovi: 21
Pridružen/a: 13 sij 2009, 09:04
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
pinco je napisao/la:Izgleda da nije do sambe, iako je disk i svi direktoriji stavljen vlasnik pinco, ono šta transmission downloada postne root vlasnik........, nije mi jasno kako......


Aha, onda sam krivo shvatil tvoj problem. Ja sam mislil da nemaš pravo brisati ono kaj ti dođe prek sambe. U tom slučaju provjeri pod kojim se ovlastima izvodi transmission. Ako se izvodi pod root ovlastima, onda sve fajlove koje on stvori su automatski pod root-om.
:mrgreen: Smile! It makes people wonder what you're thinking about... :mrgreen:
I am NaN, I am a free man!
Započnite svoje Linux iskustvo na http://wiki.open.hr
Avatar
Postovi: 1559
Postovi: 1559
Pridružen/a: 23 sij 2008, 11:51
Lokacija: ~/Croatia/Zagorje/Radoboj
Podijelio/la zahvalu: 45 puta
Primio/la zahvalu: 18 puta
Spol: M
OS: GNOME 3
Kako da to provjerin........
Transmissin je samo daemon, nema gui
Postovi: 21
Postovi: 21
Pridružen/a: 13 sij 2009, 09:04
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
pinco je napisao/la:Kako da to provjerin........
Transmissin je samo daemon, nema gui


Teoretski sa "ps aux | grep transmission", no upravo sam instalirao transmission i probao i čini se da se (barem kod mene) izvodi pod mojim ovlastima i ne kao daemon. Kod tebe je valjda drukčije... No sve u svemu, taj program je za skidati torrente, a pola normalno-očekivanih opcija mu fali. Moja preporuka je Azureus (Vuze).
:mrgreen: Smile! It makes people wonder what you're thinking about... :mrgreen:
I am NaN, I am a free man!
Započnite svoje Linux iskustvo na http://wiki.open.hr
Avatar
Postovi: 1559
Postovi: 1559
Pridružen/a: 23 sij 2008, 11:51
Lokacija: ~/Croatia/Zagorje/Radoboj
Podijelio/la zahvalu: 45 puta
Primio/la zahvalu: 18 puta
Spol: M
OS: GNOME 3
DoDo je napisao/la:
pinco je napisao/la:Kako da to provjerin........
Transmissin je samo daemon, nema gui


Teoretski sa "ps aux | grep transmission", no upravo sam instalirao transmission i probao i čini se da se (barem kod mene) izvodi pod mojim ovlastima i ne kao daemon. Kod tebe je valjda drukčije... No sve u svemu, taj program je za skidati torrente, a pola normalno-očekivanih opcija mu fali. Moja preporuka je Azureus (Vuze).


Sad san na poslu, dobro si me podsjetija na to kako se izvodi transmission, možda san u skriptu za pokretanja deamona stavija sudo isprid..........., pogledaću kad dođen doma,
Šta se transmissona tiće meni radi OK, bilo mi je bitno da radi priko weba, na serveru, zato san odabra njega, možda to mogu i drugi neznan, nisan gleda......
Postovi: 21
Postovi: 21
Pridružen/a: 13 sij 2009, 09:04
Podijelio/la zahvalu: 0 puta
Primio/la zahvalu: 0 puta
pinco je napisao/la:Sad san na poslu, dobro si me podsjetija na to kako se izvodi transmission, možda san u skriptu za pokretanja deamona stavija sudo isprid..........., pogledaću kad dođen doma,
Šta se transmissona tiće meni radi OK, bilo mi je bitno da radi priko weba, na serveru, zato san odabra njega, možda to mogu i drugi neznan, nisan gleda......


U međuvremenu sam vidio tu njegovu web server podršku - jako zgodan feature koji vuze nema. No on tada nužno mora raditi pod rootom - jer samo root ima pravo podići server na portovima manjim od 1024 (a web server je na 80).

A ako si stavil da se daemon podiže prilikom paljenja sustava (/etc/init.d skripta), onda čak nisi ni moral staviti sudo - te skripte se ionako izvršavaju kao root.

Sad po meni, stvar možeš riješiti tako da natjeraš transimission da se vrti pod userom (ali tada zaboravi na port 80, probaj 8080 (ili 9091, što je defaultno za transmission)), no tada moraš napraviti pametnu /etc/init.d skriptu (pokreći sa 'su tvojusername -c "skripta_koja_pokreće_transmission_daemon"') koja će ti pokrenuti daemon pod tvojim imenom, iako ga pokreće root.

Također možeš stvar ostaviti tako pa onda napraviti neku skripticu koja ti chmod-a/chown-a sve fajlove u tvom download-folderu prije nego kaj ga otvoriš. It's your choice.
:mrgreen: Smile! It makes people wonder what you're thinking about... :mrgreen:
I am NaN, I am a free man!
Započnite svoje Linux iskustvo na http://wiki.open.hr
Avatar
Postovi: 1559
Postovi: 1559
Pridružen/a: 23 sij 2008, 11:51
Lokacija: ~/Croatia/Zagorje/Radoboj
Podijelio/la zahvalu: 45 puta
Primio/la zahvalu: 18 puta
Spol: M
OS: GNOME 3

Na mreži
Trenutno korisnika/ca: / i 1 gost.