Kako iskompajlirati svoj kernel (Ubuntu)

[shrike]

dovoljno je instalirati kernel_image, ovi ostal inisu nužni. U GUI konfiguraciji on postavi default postavke i može se lako iz File -> open otvoriti bilo koja druga .conf, pa i oldconf iz /boot. To je daleko najlakša metoda jer daje lijepo sučelje.

[Grof]

Da, fakat nisam o tome uopće razmišljao. Eh!

[kaiwan]

Rezultati:
- normalno se boota pri prvom bootu mi je javio da ce radit u LOW-GRAPHIC modu, pa sam malo editirao xorg.conf i
uspio dobit rez sa 800*600 na 1024*768. Ali sada ne znam sto moram upisati da dobijem 1280*1024...
Dat cu tu svoj xorg pa ako znate:

Kod: Označi sve

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection

Section "Module"
	Load		"glx"
	Load		"GLcore"
	Load		"v4l"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"hr"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "Device"
	Identifier	"Failsafe Device"
	Boardname	"vesa"
	Busid		"PCI:1:0:0"
	Driver		"vesa"
	Screen	0
EndSection

Section "Monitor"
	Identifier	"Failsafe Monitor"
	Vendorname	"Generic LCD Display"
	Modelname	"LCD Panel 1024x768"
	Horizsync	31.5-48.0
	Vertrefresh	56.0 - 65.0

  # !!!!!!!!!!!!!!!  sljedece 3 modline opcije sam komentirao jer mi ne trebaju
  # modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  # modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  # modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync  # ->DAL I TU MORA BITI: +hsync +vsync
#!!!!!!!!!!!!! modeline "1280x1024@60" ?????????????????????   ne znam te podatke
	Gamma	1.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Failsafe Device"
	Monitor		"Failsafe Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1024	768
		Modes		"1280x1024@60" "1024x768@60" "800x600@56" "640x480@60"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "Default Screen" 0 0
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
EndSection
Section "ServerFlags"
EndSection

dodao sam ovo: modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ali ne radi, opet me baca u staru rez

[Grof]

Evo pa izaberi:

Kod: Označi sve

Section "Monitor"
	Identifier	"Generic Monitor"
	Vendorname	"Generic LCD Display"
	Modelname	"LCD Panel 1600x1200"
	Horizsync	31.5-74.7
	Vertrefresh	56.0 - 65.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
	Gamma	1.0
EndSection

[Grof]

A zašto ne probaš sa ovime iskonfigurirati:

Kod: Označi sve

sudo dpkg-reconfigure -phigh xserver-xorg

Da, to ti se sa grafikom desilo jer ti je prestao raditi modul od grafičke koji radi samo pod kernelom iz repozitorija.

[kaiwan]

A zašto ne probaš sa ovime iskonfigurirati:

Kod: Označi sve

sudo dpkg-reconfigure -phigh xserver-xorg

Da, to ti se sa grafikom desilo jer ti je prestao raditi modul od grafičke koji radi samo pod kernelom iz repozitorija.

idem probati to sada....

Znam da je zato, samo sam mislio da ce me bacit u 1280*1024 kako me bacio i ubuntu kada sam ga insalirao tek

[kaiwan]

A zašto ne probaš sa ovime iskonfigurirati:

Kod: Označi sve

sudo dpkg-reconfigure -phigh xserver-xorg

Evo radi sada normalno reyolucija....

Imam novi kernel
Imam novi kernel
Imam novi kernel

Hvala pomagacima, Grofu i Shriku

[kaiwan]

I normalno rade programi koje sam iskompilirao sam...mislio sam da oni nece htjet...ali rade...

Ako idem rucno drivere za nvidiu stavit, hocu poremetit sta kod restricted drivers managera koji je vezan za stari kernel ?

[kaiwan]

E sada mi ne radi zvuk...kaze: no volume control GStreamer plugins and/or devices found

Ovo mi javi za gresku kada instaliram nove ALSA drivere:

Kod: Označi sve

make[1]: Entering directory `/home/miroslav/bin/alsa-driver-1.0.15/acore'
mkdir -p /lib/modules/2.6.24.3/kernel/sound/acore
cp snd-hwdep.ko snd-page-alloc.ko snd-pcm.ko snd-rawmidi.ko snd-rtctimer.ko snd-timer.ko snd.ko /lib/modules/2.6.24.3/kernel/sound/acore
cp: cannot stat `snd-hwdep.ko': No such file or directory
cp: cannot stat `snd-page-alloc.ko': No such file or directory
cp: cannot stat `snd-pcm.ko': No such file or directory
cp: cannot stat `snd-rawmidi.ko': No such file or directory
cp: cannot stat `snd-rtctimer.ko': No such file or directory
cp: cannot stat `snd-timer.ko': No such file or directory
cp: cannot stat `snd.ko': No such file or directory
make[1]: *** [modules_install] Error 1
make[1]: Leaving directory `/home/miroslav/bin/alsa-driver-1.0.15/acore'
make: *** [install-modules] Error 1

[shrike]

Hm. Da li su ti ALSA moduli za taj kernel? Ako da, obično se traži source u /usr/src, no vidim da kod tebe to nije nužno tako. Probaj prebaciti source u /usr/src, probaj opet i javi. Probaj i restartat komp.