07 kol 2019, 16:50
07 kol 2019, 17:43
dmesg; journalctl -k -p err; lspci -vnn |grep -A 8 Network
07 kol 2019, 18:34
07 kol 2019, 19:35
07 kol 2019, 20:11
lspci -vnn |grep -A 10 Network
Drivers detected as "b43-pci-bridge"
Generally if you see your WiFi drivers listed as "b43-pci-bridge" you have conflicting drivers installed. In a minority of instances a driver detected as "b43-pci-bridge" may function adequately. However, drivers installed this way tend to be unreliable in the long term.
In these cases the drivers included in the kernel may be the better choice. You may find your driver issues can be corrected by simply uninstalling the "broadcom-wl" drivers. You can uninstall the wl drivers through the Manjaro Settings Manager. Open Manjaro Settings Manager -> Hardware configuration -> right click on your device driver and select “Remove”. Once the "broadcom-wl" drivers are uninstalled you can test the b43 driver:
sudo rmmod wl
sudo rmmod ssb
sudo rmmod b43
sudo modprobe b43
Then:
sudo rfkill unblock all
sudo systemctl restart NetworkManager
sudo depmod -a
sudo mkinitcpio -P
Test your wifi for connectivity.
Then reboot you computer. After restarting, the kernel drivers should automatically load.
If the kernel modules do not load automatically you must ensure they are not blacklisted. Check that no blacklist file exists in any of these locations:
/etc/modprobe.d/
/etc/modules-load.d/
/usr/lib/modprobe.d/
Any blacklist on the broadcom kernel modules (as in the blacklist example above), must either be deleted, or commented out. The blacklist entries can be made to be ignored by adding a pound sign "#" (hash tag ) before any entry line. This is what is referred to as "commenting out" an entry.
There is no guarantee the correct kernel module will automatically be loaded for your adapter model. As different adapters may use different modules you may need to research which modules are required. A different blacklist may be required for different kernel modules, so this can get complicated. If the installation steps listed here do not resolve your broadcom driver issues a support request on the forum may be helpful.
09 kol 2019, 16:59
08 ruj 2019, 07:26
08 ruj 2019, 09:47
jonke4 je napisao/la:Kako mogu a prebacim sliku sa Ubuntua na windows dokument? Hitno mi treba.
Hvala
12 ruj 2019, 19:36
jonke4 je napisao/la:Kako mogu a prebacim sliku sa Ubuntua na windows dokument? Hitno mi treba.
Hvala